Record ID: LEIC-48E51D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 33mm in length, 21mm wide, 4mm thick, with a weight of 51.42g. The object si rectangular in form and cross section and consists of a flat plate, with a pinched collar close to one edge (right as shown). Beyond this the object forms a sub rectangular plate with a central circular hole, sitting just behind a slight central recess. On the other side of the collar the object has two raised transverse ridges and behind this is decorated with six incised lines with a few shorted diagonal ones crossing them. At the far end it is damaged but has one c…
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-486C57
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle with integral strap end fragment, 42mm in length, 14mm wide, 5mm thick, with a weight of 4.04g. The fragment is one half of a strap end frame with a rectangular cross section which is attached to a curving buckle loop. See Whitehead, R. 'Buckles' p.36-7.
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-485067
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Late Medieval copper alloy buckle frame fragment, 29mm in length, 6mm wide, 4mm thick, with a weight of 3.48g. The object is part of a buckle frame with an oval cross section and is curved with a recessed central area to house a roller, flanked by slight projections. See Whitehead, R. 'Buckles' p.22-3.
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-8C281C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 26mm long, 19mm wide and weighing 4.54g. The buckle is semi-circular in form and rectangular in cross section. It has a recessed pin bar with a D shaped loop. the loop has a rounded projection in the centre of its outer edge with a recessed pin rest running across it. The buckle is of a type dated to 1350-1450 in Whitehead, R. Buckles 1250-1800 p.20
Created on: Tuesday 18th June 2019
Last updated: Tuesday 7th April 2020
Spatial data recorded.

Record ID: LEIC-8C1A05
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post Medieval copper alloy buckle, 32mm long, 22mm wide and weighing 4.63g. The buckle is sub-rectangular in form and D shaped in cross section and is double looped. It has a central pin bar separating two sub circular loops. The buckle has small rounded projections at each end of the pin bar and two on each loop, at the outer 'corners' . The buckle is of a type dated to 1550-1650 in Whitehead, R. Buckles 1250-1800 p.63
Created on: Tuesday 18th June 2019
Last updated: Tuesday 18th June 2019
Spatial data recorded.

Record ID: LEIC-FA5241
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Late Early Medieval copper alloy buckle, 18mm in length, 17mm wide, 3mm thick with a weight of 2.49g. The object is D shaped in form and sub circular in cross section. It is very worn but is formed of a rounded loop which terminates in zoomorphic heads with upwards projecting snouts. The slightly recessed pin sits below each head. The buckle has excavated parallels in Winchester (Hinton in Biddle 1990, no. 1110) and Norwich (Margeson 1993, no. 127).
Created on: Tuesday 11th June 2019
Last updated: Friday 14th June 2019
Spatial data recorded.

Record ID: LEIC-847F36
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Early Post Medieval copper alloy buckle, 34mm in length, 22mm wide and 3mm thick with a weight of 4.69grams. The object is sub rectangular in form and D shaped in cross section. The buckle has a rounded upper surface and consists of two sub circular loops merging into a central pin bar. It has rounded knops, on each outer corner. It is similar to IOW F01169.
Created on: Tuesday 30th April 2019
Last updated: Friday 17th May 2019
Spatial data recorded.

Record ID: LEIC-8460A3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Early Post Medieval copper alloy buckle, 22mm in length, 22mm wide and 2mm thick with a weight of 2.73grams. The object is sub rectangular in form and D shaped in cross section. It has two oval loops, one with a slightly pointed centre, a rounded upper surface and it pin bar has iron staining.
Created on: Tuesday 30th April 2019
Last updated: Friday 17th May 2019
Spatial data recorded.

Record ID: LEIC-844703
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Early Post Medieval copper alloy buckle, 27mm in length, 21mm wide and 2mm thick with a weight of 3.47grams. The object is sub rectangular in form and D shaped in cross section. It is formed of two oval loops with one rounded surface and is covered in iron staining around the pin bar and the rest.
Created on: Tuesday 30th April 2019
Last updated: Friday 17th May 2019
Spatial data recorded.

Record ID: LEIC-842D3B
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Early Post Medieval copper alloy double looped buckle, 25mm in length, 23mm wide and 2mm thick with a weight of 2.53grams. The object sub rectangular in form and cross section and consists of two oval loops formed of an irregular, angular frame with a sub rectangular cross section. Where the two loops meet at one edge there is an irregular recess, which may be where a loop has broken off ? it is similar in form to BH-C0FB26.
Created on: Tuesday 30th April 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-59B28B
Object type: BUCKLE
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Late Roman copper alloy buckle, 27mm in length, 21mm wide and 4mm thick with a weight of 7.37g. The object is sub rectangular in form and cross section. It consists of a D shaped buckle frame which is decorated with two outwards facing horses heads. These are C shaped with curved necks, sub triangular heads and small rounded projections for ears. Below the ears are dot in circle stamped eyes. The mane is picked out with a double row of circular stamps running down the edge and a single row continues across the body, just above the ridge where the projection joins the frame. The fra…
Created on: Tuesday 16th April 2019
Last updated: Wednesday 1st April 2020
Spatial data recorded.

Record ID: LEIC-C7C6DB
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Post Medieval copper alloy buckle, 24mm in length, 24mm wide and 2mm thick with a weight of 3.58g. The object is rectangular in form and cross section and is one half of double looped buckle. It has a trapezoidal frame which has rounded projections at each corner and at each end of the central pin bar. Its wider outer edge has an incised line running centrally down the frame and this has a centrally placed short line, projecting out at a right angle onto a central triangular projection which acts as a pin rest. The buckle matches e.g.s. 523-25, P.84 in Whitehead, R. Buckles 1250-1850.
Created on: Tuesday 9th April 2019
Last updated: Friday 26th April 2019
Spatial data recorded.

Record ID: LEIC-C7A1F9
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Two post Medieval copper alloy buckles, The larger intact buckle measures 51mm in length, 31mm wide and 2mm thick with a weight of 10.78grams. The smaller fragment measures 30mm in length, 28mm wide and 2mm thick with a weight of 5.54grams Both are double looped and of an openwork form, with a series of slightly raised dots forming a border. The intact one has a series of four large and four small holes in its frame. They are both very similar and possibly the same date as the series of rectangular shoe buckles illustrated in Whitehead, R. 'Buckles' p. 80 and 85.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.

Record ID: LEIC-C6DD75
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 20mm in length, 16mm wide and 4mm thick with a weight of 1.62grams. The buckle has a sub-rectangular form and cross section and is intact, except for the pin. It has an oval frame with a sub rectangular cross section and a wide flat outer edge which has a recessed inner portion to allow for a roller, now missing, and slight triangular projections at each edge. The opposite side has a narrow recessed circular sectioned pin bar.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.

Record ID: LEIC-C68B26
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 7mm in length, 17mm wide and 2mm thick with a weight of 2.13grams. The buckle is sub circular in form and rectangular in cross section. It has a single sub-circular loop with a D shaped section and it has two small rectangular projections, with a triangular cross section, flanking the short pin rest. The pin is wrapped around the bar and has a D shaped cross section and tapers to a point.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.

Record ID: LEIC-C5CAEE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle and integral spacer plate, 36mm in length, 22mm wide and 2mm thick with a weight of 3.64grams. The object is sub rectangular in form and rectangular in cross section. It consists of a single oval loop with pointed pin rest and a circular cross section, which is attached to a spacer plate formed of two sub rectangular tapering arms. The buckle matches e.g.s 322-330 in Egan, G. and Pritchard, F. Dress Accessories, c.1150-c.1450 (Medieval Finds from Excavations in London) 1991.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-92303D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy possible buckle plate? 28mm long, 24mm wide and 2mm thick with a weight of 6.42g. The object consists of a rectangular plate with a rectangular cross section. It has a circular hole in each corner (one incomplete) and a slightly larger one, positioned just off centre. The object could be part of a buckle plate or other belt fitting and is probably Medieval in date.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Cadeby', grid reference and parish protected.

Record ID: LEIC-921617
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 37mm long, 23mm wide and 2mm thick with a weight of 3.46g. The object consists of a rectangular plate with two small incomplete rounded rectangles, which would have formed frame loops, projecting from one short edge. The object is incomplete but has a raised edge containing a stylised w beast, probably a winged griffin. It has a small circular hole in its complete corner opposite its fixing loops and this has traces of gilding around it. The decoration is probably a devolved version of YORYM-066D9E which is dated to 1200-1300AD.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Knapwell', grid reference and parish protected.

Record ID: LEIC-91B980
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy spur buckle, 32mm long, 18mm wide and 6mm thick with a weight of 5.09g. The object consists of an incomplete rectangular loop with an attached rectangular frame joined with a recessed collar, all with a rectangular cross section. The loop has part of a pin fitted through a circular hole just beyond the loop. The buckle is very similar to NMS-28D1ED.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.

Record ID: LEIC-917DEC
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Early Medieval copper alloy Borre style buckle, 30mm long, 23mm wide and 4mm thick with a weight of 3.35g. The object consists of an oval loop with a circular cross section. This has an elongated triangular pin rest in the form of an animal head. This has a pointed snout, rounded head with rounded upwards pointing ears which merge into the buckle loop and flank a triangular recess designed to house the pin, now missing. At the opposite side there are two short sub rectangular cross sectioned shafts, c. 6mm apart which project outwards c 5mm. These have now incomplete looped ter…
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.