Record ID: LEIC-48E51D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 33mm in length, 21mm wide, 4mm thick, with a weight of 51.42g. The object si rectangular in form and cross section and consists of a flat plate, with a pinched collar close to one edge (right as shown). Beyond this the object forms a sub rectangular plate with a central circular hole, sitting just behind a slight central recess. On the other side of the collar the object has two raised transverse ridges and behind this is decorated with six incised lines with a few shorted diagonal ones crossing them. At the far end it is damaged but has one c…
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-486C57
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle with integral strap end fragment, 42mm in length, 14mm wide, 5mm thick, with a weight of 4.04g. The fragment is one half of a strap end frame with a rectangular cross section which is attached to a curving buckle loop. See Whitehead, R. 'Buckles' p.36-7.
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-485067
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Late Medieval copper alloy buckle frame fragment, 29mm in length, 6mm wide, 4mm thick, with a weight of 3.48g. The object is part of a buckle frame with an oval cross section and is curved with a recessed central area to house a roller, flanked by slight projections. See Whitehead, R. 'Buckles' p.22-3.
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-8C281C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 26mm long, 19mm wide and weighing 4.54g. The buckle is semi-circular in form and rectangular in cross section. It has a recessed pin bar with a D shaped loop. the loop has a rounded projection in the centre of its outer edge with a recessed pin rest running across it. The buckle is of a type dated to 1350-1450 in Whitehead, R. Buckles 1250-1800 p.20
Created on: Tuesday 18th June 2019
Last updated: Tuesday 7th April 2020
Spatial data recorded.

Record ID: LEIC-FA5241
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Late Early Medieval copper alloy buckle, 18mm in length, 17mm wide, 3mm thick with a weight of 2.49g. The object is D shaped in form and sub circular in cross section. It is very worn but is formed of a rounded loop which terminates in zoomorphic heads with upwards projecting snouts. The slightly recessed pin sits below each head. The buckle has excavated parallels in Winchester (Hinton in Biddle 1990, no. 1110) and Norwich (Margeson 1993, no. 127).
Created on: Tuesday 11th June 2019
Last updated: Friday 14th June 2019
Spatial data recorded.

Record ID: LEIC-C6DD75
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 20mm in length, 16mm wide and 4mm thick with a weight of 1.62grams. The buckle has a sub-rectangular form and cross section and is intact, except for the pin. It has an oval frame with a sub rectangular cross section and a wide flat outer edge which has a recessed inner portion to allow for a roller, now missing, and slight triangular projections at each edge. The opposite side has a narrow recessed circular sectioned pin bar.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.

Record ID: LEIC-C68B26
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 7mm in length, 17mm wide and 2mm thick with a weight of 2.13grams. The buckle is sub circular in form and rectangular in cross section. It has a single sub-circular loop with a D shaped section and it has two small rectangular projections, with a triangular cross section, flanking the short pin rest. The pin is wrapped around the bar and has a D shaped cross section and tapers to a point.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 17th April 2019
Spatial data recorded.

Record ID: LEIC-C5CAEE
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle and integral spacer plate, 36mm in length, 22mm wide and 2mm thick with a weight of 3.64grams. The object is sub rectangular in form and rectangular in cross section. It consists of a single oval loop with pointed pin rest and a circular cross section, which is attached to a spacer plate formed of two sub rectangular tapering arms. The buckle matches e.g.s 322-330 in Egan, G. and Pritchard, F. Dress Accessories, c.1150-c.1450 (Medieval Finds from Excavations in London) 1991.
Created on: Tuesday 9th April 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-92303D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy possible buckle plate? 28mm long, 24mm wide and 2mm thick with a weight of 6.42g. The object consists of a rectangular plate with a rectangular cross section. It has a circular hole in each corner (one incomplete) and a slightly larger one, positioned just off centre. The object could be part of a buckle plate or other belt fitting and is probably Medieval in date.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Cadeby', grid reference and parish protected.

Record ID: LEIC-921617
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 37mm long, 23mm wide and 2mm thick with a weight of 3.46g. The object consists of a rectangular plate with two small incomplete rounded rectangles, which would have formed frame loops, projecting from one short edge. The object is incomplete but has a raised edge containing a stylised w beast, probably a winged griffin. It has a small circular hole in its complete corner opposite its fixing loops and this has traces of gilding around it. The decoration is probably a devolved version of YORYM-066D9E which is dated to 1200-1300AD.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Knapwell', grid reference and parish protected.

Record ID: LEIC-91B980
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy spur buckle, 32mm long, 18mm wide and 6mm thick with a weight of 5.09g. The object consists of an incomplete rectangular loop with an attached rectangular frame joined with a recessed collar, all with a rectangular cross section. The loop has part of a pin fitted through a circular hole just beyond the loop. The buckle is very similar to NMS-28D1ED.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.

Record ID: LEIC-3E7E75
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 32 mm long, 22 mm wide and 3 mm thick with a weight of 2.88g. The object is sub rectangular in form with a rounded D shaped loop with D shaped cross section. It has a recessed pin bar with a slight notch to hold the pin in the outside centre. The pin rest is slightly projected with a triangular apex, which lines up with a linear depression for the pin. It has a double collar at each end where it merges into the main frame.
Created on: Monday 25th February 2019
Last updated: Monday 8th April 2019
Spatial data recorded.

Record ID: LEIC-BD5B6A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 18mm in length, 19mm wide and 3mm thick with a weight of 1.85grams. The object is rectangular in form and cross section, with slightly bowed sides which widen out towards the wide outer end which contains a central pin rest.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-BD49AD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 24mm in length, 16mm wide and 5mm thick with a weight of 2.66grams. The object is rectangular in form and cross section, with slightly bowed sides and a recessed strap bar. The opposite edge has a slightly rounded outer edge accommodating a wide pin rest which terminates with slight knops and has a slight rounded central projection underneath the pin rest.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-17ED3D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval silver buckle, 20mm long, 15mm wide and 4 mm thick with a weight of 3.78g. The buckle is rectangular in form and cross section and consists of an oval frame which is made up of two straight sides and two curved ones, which have a trapezoidal cross section. The curves terminate at four sub spherical knops which are decorated with circular and semi-circular punch marks. The terminals of the curved parts form a slightly raised collar under each knop. At one side there is a plain circular cross sectioned bar, which holds the pin. This has a raised collar above its suspension…
Created on: Monday 11th February 2019
Last updated: Tuesday 2nd November 2021
Spatial data recorded.

Record ID: LEIC-9878F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Medieval or post Medieval copper alloy buckle, 40mm in length, 37mm wide and 3mm thick with a weight of 8.26g. The buckle is a double loop type and is formed of two joining oval loops with no embellishments and has a sub rectangular cross section. These types date to 1350-1650. This eg. matches no.295, p.53 in Whitehead, R. 1996. 'Buckles 1250-1800'.
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.

Record ID: LEIC-96CAF4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy disc on pin buckle pin, 27mm in length, 17mm wide and 4mm thick with a weight of 3.45grams. The buckle pin is circular in form and rectangular in cross section. It consists of a pin with a circular plate in its centre and this has four sub-spherical projections riveted onto it. At opposing ends are two projections. One forms a partial loop to attach to the buckle loop and the other the tapering pin. Redmayne type A4.
Created on: Tuesday 5th February 2019
Last updated: Monday 18th February 2019
Spatial data recorded.

Record ID: LEIC-96856E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy buckle ? 32mm in length, 23mm wide and 4mm thick with a weight of 5.61g. The object is sub circular in form and sub rectangular in cross section. It appears to be ely D shaped with a wider curved side and now broken, thinner straight edge which suggests a pin bar.
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.

Record ID: LEIC-9663A2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy zoomorphic buckle. 30mm in length, 23mm wide and 11mm thick with a weight of 14.27g. The object is sub rectangular in form and cross section and takes the form of a backwards facing dog or lion. It has a thin body with pronounced shoulders and thighs. It has very worn decoration around its neck, suggesting a mane. Its legs are joined in pairs with the feet only de-marked by a linear depression on the base. The two pairs of legs are joined by a flat bar across the base. This holds a very corroded iron pin which runs up to the animals shoulder. Good examples…
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.

Record ID: LEIC-FCD784
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy single looped buckle, 19mm in length, 17mm wide and 3mm thick with a weight of 2.03grams. The buckle is sub circular in form and rectangular in cross section. The frame has rounded sides with a narrow offset strap bar at one end and a wider rectangular pin rest at the other. This is is recessed to house a copper alloy sheet roller, now missing. cf. Egan and Pritchard 1991, 76.
Created on: Tuesday 11th December 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.