Record ID: LEIC-344855
Object type: FINGER RING
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman? or later silver finger ring, 26 mm in diameter, 7mm wide and 3-4mm thick with a weight of 9.61g. The object consists of a thick loop which is decorated with a series of sub triangular transverse ridges , three of which (at cardinal points) are decorated with an incised transverse line, each side of its ridge. The object may be a male finger ring. It was found in a concentration of Roman material whose make up suggests a newly discovered temple site.
Created on: Thursday 21st March 2019
Last updated: Wednesday 19th July 2023
Spatial data recorded.

Record ID: LEIC-0DAE33
Object type: FINGER RING
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
Roman ? silver gilt ring fragment, 11mm long, 8mm wide and 3mm thick with a weight of 1.24g. The object comprises about half the bezel of a signet type ring. It is triangular in form and D shaped in cross section. Its wide broken end has a curved recess to take an intaglio and the upper surface is decorated on each edge with a wide concave band which is gilded and inside this is a narrow incised line. These converge as the object narrows to its loop. This is probably matches by a similar one around the edge of the bezel. The object is very worn.
Created on: Tuesday 19th March 2019
Last updated: Wednesday 24th July 2019
Spatial data recorded.

Record ID: LEIC-A3EF06
Object type: FINGER RING
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
Roman silver finger ring fragment, 18mm long, 4mm wide and 2mm thick (hoop) with a weight of 2.48grams. The ring comprises the bezel and 'shoulder' fragment of the hoop. The bezel is oval in form (11mm long, 9mm wide and 6mm high) and rectangular in cross section. When viewed from the side, where it attaches to the hoop, it has a trapezoidal cross section, flaring outwards to the upper edge. The upper surface of the bezel has a raised lip surrounding it and this and the base are covered in white adhesive. The hoop is triangular in cross section and has a circular depression on the sho…
Created on: Thursday 14th September 2017
Last updated: Wednesday 14th August 2019
Spatial data recorded. This findspot is known as 'Cambridgeshire', grid reference and parish protected.

Record ID: LEIC-F4014B
Object type: FINGER RING
Broad period: ROMAN
County: Rutland
Workflow stage: Awaiting validation
Roman silver finger ring fragment, Length: 15 mm, width: 12 mm, thickness: 4.0 mm, weight: 5.49 grams. The object consists of about half a silver finger ring with an oval cross sectioned hoop which has a slight, flat linear projection at each adge. The hoop widens out, so that most of its upper half forms the bezel. This has a circular depression, which probably housed an intaglio, now missing. The object was found in the same field as another T case 2016T475, see LEIC-F34F86. This field contains a Roman villa, indentified in 1991 by metalwork and pottery/building materials sc…
Created on: Tuesday 25th April 2017
Last updated: Friday 11th May 2018
Spatial data recorded.

Record ID: LEIC-74246E
Object type: FINGER RING
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Published
Roman silver finger ring, 24mm in diameter, 11mm wide at the bezel and 3mm thick with a weight of 10.42grams The loop is oval in cross section with no decoration and it widens to form an oval bezel with a flat upper surface housing an oval depression 12mm long and 8mm wide. This would have contained an intaglio or similar which is now missing. The ring is of Henig's type III (2007, 9) and Guiraud's type 2d (2003, 79), a type dated to the second to third century AD. Henig, M. 2007. A corpus of engraved gemstones from Romano-British sites. BAR 8, 3rd edition. Oxford, Archaeopr…
Created on: Thursday 12th January 2017
Last updated: Monday 2nd August 2021
Spatial data recorded.

Record ID: LEIC-7C11EE
Object type: FINGER RING
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Published
Roman silver finger ring fragment with a snake head terminal 18mm long, 6mm wide and 2mm thick with a weight of 1.10grams. The object consists of a plain band which has a rectangular cross section. This widens to accommodate a slightly domed oval shaped snake head. The head is very worn but has the distinct globular terminal at its end and behind this has four rounded protrusions surrounding a W shaped depression to represent scales. The head is surrounded by a flat border which appears to have raised lines running its length. The ring is a worn version of those found at Snettisham…
Created on: Friday 10th April 2015
Last updated: Thursday 15th October 2015
Spatial data recorded.

Record ID: LEIC-114F44
Object type: FINGER RING
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published
Roman silver intaglio finger ring 28mm in width, 24mm deep and 12mm thick at the bezel. The object is in fair condition and weighs 13.49grams. The ring has a circular hoop with an oval cross-section. This is narrow at the bottom and expands and swells to form a flattened bezel which is set with an oval Intaglio, made from a stone? with a white body and an orange surface. The intaglio shows a standing figure with something held in one hand. The form of the ring fits Giurauds type 2c (Henig type II?). which have been dated to 1st and 2nd Centuries. The subject of the intaglio matches…
Created on: Wednesday 29th October 2014
Last updated: Tuesday 4th October 2016
Spatial data recorded.

Record ID: LEIC-53B787
Object type: FINGER RING
Broad period: ROMAN
County: Rutland
Workflow stage: Published
Roman silver finger ring, 20mm long, 18mm high and 9mm wide, 4.94 grams. The ring consists of an incomplete oval sectioned band with slightly expanded bezel which contains an incomplete oval depression, for an intaglio now missing.
Created on: Tuesday 15th January 2013
Last updated: Wednesday 2nd September 2015
Spatial data recorded.

Record ID: LEIC-D6B504
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman silver TOT finger ring, 25mm in diameter, 14mm wide and 4mm thick (at loop). The object is in good condition and weighs 13.10grams. The ring has a sub rectangular bezel which forms half of its total surface. It consists of a circular raised bezel inscribed with TOT. This sits on a 'diamond' shaped platform which curves downwards and whose points merge into the loop. Above and below this area on each side are cut out scrolls after which the edge narrows to join the loop. The loop has a wide rectangular section. The ring fits Henig class VIII, closest parallels are one example …
Created on: Wednesday 11th July 2012
Last updated: Thursday 17th April 2014
Spatial data recorded. This findspot is known as 'Wymeswold', grid reference and parish protected.

Record ID: LEIC-D6A154
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman silver TOT finger ring, 20mm in diameter, 21mm wide and 3mm thick (at loop). The object is in good condition and weighs 4.27grams. The ring has a sub rectangular bezel which forms half of its total surface. It consists of a circular raised bezel inscribed with O. This sits on a 'diamond' shaped platform which curves downwards and whose points merge into the loop. The inside of this area is covered with small incisions. Above and below the circle the object narrows and has a W shaped edge. It has incised scrolls on each side, above and below the main decoration. beyond this point…
Created on: Wednesday 11th July 2012
Last updated: Thursday 19th December 2013
Spatial data recorded. This findspot is known as 'Eaton', grid reference and parish protected.

Record ID: LEIC-D636D8
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
Roman silver intaglio finger ring, 25mm in diameter and 14mm wide at bezel. The object is in good condition and weighs 12.86grams. The ring has a plain band with a D shaped section, which widens into a bezel which accommodates an oval orange carnelian? intaglio. The intaglio features a standing female figure, with a rearing animal in front, possibly representing her riding a chariot? There is a chip out of the surface just behind the figures head. I haven't been able to find this image in a reference book.
Created on: Wednesday 11th July 2012
Last updated: Thursday 22nd October 2015
Spatial data recorded. This findspot is known as 'Eaton', grid reference and parish protected.

Record ID: LEIC-6A97A5
Object type: FINGER RING
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Published
Roman silver finger ring, 23mm in diameter and 16mm wide. The object is in poor condition with several cracks and looks repaired. It is also incomplete and weighs 8.64grams. The ring has a wide and thick bezel with a central raised oval platform in its centre. This is inscribed with a small 'o' flanked by two straight vertical lines. On each side of this platform is a small oval indentation which contains stamped decoration in the form of two (three) stamped circles. Beyond this is another raised area, this time triangular in form to fit into the narrowing width. At the apex of these …
Created on: Monday 30th January 2012
Last updated: Monday 6th July 2020
Spatial data recorded.

Record ID: LEIC-88D303
Object type: FINGER RING
Broad period: ROMAN
County: Bedford
Workflow stage: Published
Roman silver finger ring fragment, 20mm long and 7mm wide. The object weighs 0.86grams and is in fair condition. The ring consists of a circular raised bezel which is flanked by two sub triangular shoulders which have an incised border running up to the circle. The shape roughly fits Henig type VIII. There is a small circular depression in the centre of the bezel which is surrounded by linear scratches which appear to be damage
Created on: Thursday 10th March 2011
Last updated: Thursday 6th August 2020
Spatial data recorded. This findspot is known as 'Bromham', grid reference and parish protected.

Record ID: PAS-A96F06
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman silver ring fragmen. The object consists of a raised circular bezel, 8mm in diameter and 2mm thick, which appears undecorated. The tapering shoulders emerge from the base of this and are 6mm wide and 1mm thick. They are decorated with two central incised lines flanked by a border of triangular depressions. The ring is of poor quality silver and has been crudely cast. The object is in a fair condition having a scratched surface and a dark silver patina. It is 15mm long and 8mm wide and weighs 1.37grams.
Created on: Friday 14th March 2008
Last updated: Monday 11th July 2011
Spatial data recorded. This findspot is known as 'Thrussington', grid reference and parish protected.

Record ID: LEIC-433262
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Published
Roman silver finger ring fragment. It is 15mm long, 12mm wide and 4mm thick. The object is in fair condition with a silver patina and weighs 2.75grams. The object consists of an oval sectioned loop which widens to accomodate a circular bezel which contains part of a circular depression which would have held an intaglio.
Created on: Friday 9th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-A9F793
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
Roman silver finger ring fragment, 13mm long 11mm wide and 4mm thick. The object is in fair condition with a grey patina and weighs 1.40 grams. It is sub rectangular in section and is curved. The fragment represents the bezel of the ring and it contains a raised circular area, 8mm in diameter, which may have been engraved.
Created on: Friday 15th September 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-0C08D5
Object type: FINGER RING
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
Roman silver finger ring fragment, 15mm long and 8mm wide. The object is in a fair condition with a silver patina and weighs 1.37grams. The object consists of a raised circular bezel, 8mm in diameter and 2mm thick, which appears undecorated. The shoulders emerge from the base of this and are 6mm wide and 1mm thick. They are decoarted with two central incised lines flanked by a border of triangular depressions. The ring is of poor quality silver and has been crudely cast.
Created on: Tuesday 8th November 2005
Last updated: Wednesday 1st July 2020
Spatial data recorded. This findspot is known as 'Thrussington', grid reference and parish protected.