Record ID: LEIC-68F873
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy buckle plate, 16mm long, 15mm wide and 3mm thick. The object is in fair condition with a brown patina and weighs 1.79grams. The plate is rectangular in form and section, but has damaged edges. The two plates are joined by an integral rectangular shaped protrusion which is rectangular in section with a semi-circular end, This would have held the plate onto the buckle. The plate has two circular copper alloy rivets close to its lower edge.
Created on: Thursday 30th August 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-6708B1
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Published
Medieval copper alloy single loop buckle, 30mm long, 23mm wide and 3mm thick. brown patina weighs 4.10grams. The buckle is sub rectangular in form and rectangular in section. It has an integral recessed pin bar and has a decorated pin rest. The rest which is the widest part has two sets of three diagionally aligned incised lines, sitting on raised rectangular sections, between which the pin would sit. This matches No 92 in buckles 1250-1800, and dates to 1250-1400.
Created on: Tuesday 11th September 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-8EC545
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy buckle plate, 25mm long, 16mm wide and 5mm thick. The object is in a fair condition with a green patina and weighs 2.26grams. The plate is rectangular, formed of one piece of metal folded over and is secured by two circular sectioned rivets, one in each outer corner. The plate is decorated on one side with four sets of raised lines, two running diagonally, one vertically and one horizontally which cross in the centre. These are decorated with rows of raised zig zag decoration.
Created on: Tuesday 25th September 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-83D298
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy buckle and plate, 50mm long, 19mm wide and 6mm thick. The buckle is in fair condition with a greenish/brown patina and weighs 6.30grams. The object consists of a D shaped buckle which has a loop with steeply angled curved edge, the outer surface of which has several incised lines running across its surface. The plate is quite damaged but is held in place by a single large circular rivet, 5mm in diameter, placed centrally behind the pin. The pin sits centrally on the straight edge of the loop and is flanked by two rectangular 'hinges' which hold the loop onto the …
Created on: Monday 12th November 2007
Last updated: Tuesday 21st August 2018
Spatial data recorded.

Record ID: LEIC-C4BA12
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Published
Medieval copper alloy buckle with integral long plate, 58mm long, 12mm wide and 3mm thick. The object is good condition with a brown patina and weighs 6.24 grams. The loop is circular in section and form and emerges from a semi-circular sectioned, rectangular shaped plate. The loop has a small semi-circular recess above an integral bar with a circular hole below it to contain the pin. This is folded around the bar and tapers to a point. It has a semi-circular section and is bright green in colour. The plate has two intact copper alloy rivets, one at each end. It terminates with a raise…
Created on: Thursday 15th November 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-F39670
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy single looped buckle, 24mm long, 19mm wide and 6mm thick. The buckle is in fair condition with a green patina and weighs 3.38grams. It consists of a sub-circular recessed pin bar with squared off terminals. The loop, which is D shaped, widens as it approachs its centre and is angled outwards. The loop is decorated along its outer edge with a line of very fine punched circles. The pin is semi-circular and tapers to a point, it is attached by curling around the pin.
Created on: Wednesday 22nd October 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-C06447
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Published
Post Medieval copper alloy buckle fragment, 21mm long, 18mm wide and 2mm thick. The buckle is in fair condition with a green patina and weighs 3.01grams. It consist of one half of a double looped buckle with integral pin bar. It has a sub triangular decorative terminal protruding from its end.
Created on: Thursday 13th November 2008
Last updated: Friday 29th October 2021
Spatial data recorded.

Record ID: LEIC-C1D375
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy single looped buckle, 20mm long, 14.5mm wide and 4mm thick. The object is in fair condition with a green patina and weighs 1.25grams. The object consists of a sub circular loop projecting from a straight pin bar. The buckle has an angled decorative pin rest consisting of a rectangular plate with two linear recesses flanking a ridge.
Created on: Thursday 13th November 2008
Last updated: Tuesday 21st August 2018
Spatial data recorded.

Record ID: LEIC-C1F374
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper-alloy buckle fragment, 25mm long, 24mm wide and 5mm thick. The object is in fair condition with a green patina and weighs 4.89g. The object consists of a sub-rectangular plate, which has a circular hole and transverse ridge at one end and a circular-sectioned fragment of frame protruding at right angles at the other. The plate has a rectangular recess which holds a fragment of hinged tapering copper-alloy pin rotating on a separate copper-alloy bar. This buckle is of T-shaped form. Compare similar buckles at NLM-369C73, SUR-C74125, SUR-1B596F, NMS-039367, DENO-4B97A…
Created on: Thursday 13th November 2008
Last updated: Friday 8th November 2019
Spatial data recorded.

Record ID: LEIC-C53D83
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Published
Medieval copper alloy buckle fragment, 36mm long, 20mm wide and 3mm thick. The object is in fair condition with a brown patina and weighs 3.43grams. The buckle consists of an oval loop which is incomplete with an integral frame. This is sub rectangular in form and has a recess in the centre which is stepped halfway to form a narrow slot to hold the pin.
Created on: Thursday 13th November 2008
Last updated: Saturday 11th August 2018
Spatial data recorded.

Record ID: LEIC-FEDFA7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Published
Post Medieval copper alloy buckle, 51mm long, 37mm wide and 2.5mm thick. The object is in good condition with agreen patina and weighs 12.12grams. The buckle is rectangular in form and section. It has flat circular protrusions at each corner and has three pronged, fleuer like, protrusions in the centre of each edge. There is an integral semi-circular sectioned pin bar in the centre and the pin rest is marked out with an incised line. The buckle dates to 1620-80 and matches fig. 529 in 'Buckles 1250-1800' by Whitehead, R.
Created on: Friday 28th November 2008
Last updated: Sunday 24th October 2021
Spatial data recorded.

Record ID: LEIC-37EBD6
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy buckle fragment, 29mm long, 8mm wide and 5mm thick. The object is in fair condition with a green patina and weighs 3.87grams. The object consists of a sub rectangular sectioned shaft which is curved and tapers to a point (probably worn) The centre of the object forms a pin rest and consists of two slight bulges bordered and seperated by rounded raised bands. These bulges are decorated with diagonal incisions.
Created on: Tuesday 6th January 2009
Last updated: Sunday 24th October 2021
Spatial data recorded.

Record ID: LEIC-046DA7
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy single looped buckle, 30mm long, 23mm wide and 3mm thick. The buckle is in fair condition with a brownish patina and weighs 4.30 grams. The buckle is sub rectangular in form and section, with rounded short sides. It has a wide pin rest which is rectnagular in form and is decorated with two sets of three diagonal incisions running either side of a central incised pin rest.
Created on: Wednesday 28th January 2009
Last updated: Tuesday 24th August 2021
Spatial data recorded.

Record ID: LEIC-C65A97
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy annular buckle, 38mm in diameter and 4mm thick. The object is in fair condition with a green patina and weighs 8.41grams. The object consists of a plain circular sectioned loop which has a circular sectioned pin, attached to the main buckle by being bent around its circumference.
Created on: Wednesday 8th April 2009
Last updated: Tuesday 24th August 2021
Spatial data recorded.

Record ID: LEIC-C6B367
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Published
Medieval copper alloy buckle, 21mm long, 18mm wide and 4mm thick. The object is in fair condition with a green patina and weighs 1.69grams. The buckle consists of a rectangular sectioned frame which is D shaped. The straight edge contains the remains of an iron pin in its inside centre. The rounded end contains a central raised section which holds a spherical knop.
Created on: Wednesday 8th April 2009
Last updated: Thursday 18th June 2020
Spatial data recorded.

Record ID: LEIC-559A02
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy D shaped buckle, 24mm long, 18mm wide and 6mm thick. The object is in good condition with a green patina and weighs 3.38grams. The object consists of a D shaped bow which tapers outwards. This is decorated with an incised border. It has a recessed pin bar and a rectangular sectioned pin which has been folded over the bar.
Created on: Thursday 21st May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-B094A2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy ring, perhaps a circular buckle frame or a harness ring. It is rectangular in cross-section and circular in form with the remains of a rectangular protrusion on the inner edge. Opposite this there are signs of wear on the inner edge, making the ring thinner. The object also has file marks on its surface.It is 32mm in diameter and 2mm thick. The object is in fair condition and weighs 1.10g.
Created on: Monday 11th July 2011
Last updated: Friday 19th March 2021
Spatial data recorded.

Record ID: LEIC-D91904
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Leicestershire
Workflow stage: Published
Post medieval copper alloy buckle, 37mm long, 12mm wide and 3mm thick. The object is in fair condition with a brown patina and weighs 3.51grams. The object is oval in form and rectangular in section. There is an integral pin running across the centre of the oval loop and at one end there is a triangular shaped protrusion which has punched linear decoration. There is the base of a protrusion at the opposite side, suggesting this is a bird buckle and the triangle represents a tail (see No 275, P.48 in Whiteheads buckles 1250-1800).
Created on: Thursday 21st February 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-1F7F64
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy three piece buckle and plate, 39mm long, 14mm wide and 6mm thick. The object is in fair condition with a green patina and weighs 4.01 grams. The object consists of a circular loop with a protruding triangular pin rest. It has two integral parallel rectangular sectioned prongs which form the support for the plate. Both plates are present, though damaged and show no signs of decoration.
Created on: Friday 25th April 2008
Last updated: Tuesday 25th January 2022
Spatial data recorded.

Record ID: LEIC-6E4423
Object type: BUCKLE
Broad period: MEDIEVAL
County: Bedford
Workflow stage: Published
Medieval copper alloy buckle, 21mm long, 18mm wide and 3mm thick. The object is in good condition with a green patina and weighs 2.54grams. The buckle has a rectangular section and is oval in form. It has a recessed circular pin bar and flared protrusions either side of a raised pin rest. The rest is decorated with incised lines and each protrusion emerges at an angle and is circular in section.
Created on: Tuesday 29th April 2008
Last updated: Tuesday 25th January 2022
Spatial data recorded.