Record ID: LEIC-2621C2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle with integral plate, 53mm long, 14mm wide and 2mm thick. The object is in fair condition and weighs 6.66grams. The object is in the form of an incomplete buckle loop which is attached to an integral semi-circular sectioned thin bar. The buckle has a semi-circular sectioned, circular? loop which has a recess above a circular hole to accomodate the pin. The bar has a rounded bulge in its centre which accomodates a hole and at the far end it terminates in an elongated triangular terminal, which has three smaller holes in its centre.
Created on: Monday 22nd August 2011
Last updated: Monday 22nd August 2011
Spatial data recorded.

Record ID: LEIC-74A613
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 37mm long, 16mm wide and 3mm thick. The buckle is in fair condition and weighs 3.21grams. The loop is oval in form with a sub rectangular section, the pin is missing. The loop is attached to a rectangular shaped plate which has two copper alloy rivets and possibly a third iron one in a row down its centre. There is a patch of thick gilding near to the central one. The buckle matches eg 186, p33 in Whitehead, R. Buckles 1250-1800.
Created on: Monday 19th September 2011
Last updated: Monday 19th September 2011
Spatial data recorded. This findspot is known as 'Wysall', grid reference and parish protected.

Record ID: LEIC-EBZB04
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
A medieval copper alloy buckle, 24mm long, 20mm wide and 4mm thick. The buckle is in fair condition and weighs 2.97grams. The buckle is D shaped with a rectangular section and a slightly recessed pin bar. It widens to a two lobed pin rest in its centre and the lobes and the rest of the surface are individually cross hatched with deep incisions. See Egan (2007) no. 792
Created on: Friday 7th October 2011
Last updated: Friday 17th August 2018
Spatial data recorded. This findspot is known as 'melton', grid reference and parish protected.

Record ID: LEIC-295E61
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle frame, 46mm long, 27mm wide and 3mm thick. The object is in fair condition and weighs 8.01grams. The object consists of an oval loop with a protruding pin rest, which is attached to two spacer bars. The bars are stepped and taper to a point.
Created on: Thursday 6th May 2010
Last updated: Tuesday 13th February 2018
Spatial data recorded.

Record ID: LEIC-29CF05
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate fragment, 31mm long, 19mm wide and 1mm thick. The object is in fair condition and weighs 2.25grams. The object consists of a rectangular plate which has had its edges roughly snipped. It is decorated on one side with a central incised linear band which has trapezoidal cross-hatched blocks emergingfrom each side.
Created on: Thursday 6th May 2010
Last updated: Tuesday 13th February 2018
Spatial data recorded.

Record ID: LEIC-C685B0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Anglo-Norman copper alloy buckle, 35mm long, 29mmwide and 2mm thick. The buckle is in good condition with a green patina and weighs 6.01 grams. The object consists of a rectangular loop, with a rectangular section, which has a small protruding pin rest in the centre of its long side. Opposite this there is a large circular hole, presumably to hold the pin, this is flanked by two smaller holes. Each of the holes is aligned over an incised line running the buckles width. Running off from these holes are three integral shafts, as with the holes the central one is slightly wider at C.4mm …
Created on: Monday 6th March 2006
Last updated: Tuesday 23rd October 2018
Spatial data recorded. This findspot is known as 'Loughborough area', grid reference and parish protected.

Record ID: LEIC-0FC166
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 39mm long, 16mm wide and 6mm thick. The object is in fair condition and weighs 3.69grams. The object consists of a flat rectangular plate which has two intact copper alloy circular rivets in one end. At the other it has a central rectangular recess to take the pin, which is flanked by the bases of rectangular protrusions, which would have folded over the loop. The surface is decorated with a border made up of a solid raised line flanked by two zig-zag lines, this appears to extend around the whole of the object.
Created on: Wednesday 2nd November 2011
Last updated: Saturday 11th July 2020
Spatial data recorded.

Record ID: LEIC-3D44E7
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Early medieval (Anglo-Scandinavian) or Medieval? copper alloy D shaped buckle, 17mm long, 17mm wide and 4mm thick. The object is in good condition and weighs 3.41grams. The object has a simple chunky D shaped and is sub circular in section. It is decorated with diagonally placed deep incisions suggesting rope work on one face and has a pin which is wrapped around the plain bar, which is narrower than the main body to accomodate it.. The object is similar in form to Scandinavian examples from York but is also possibly Medieval in date.
Created on: Friday 6th May 2011
Last updated: Friday 3rd June 2016
Spatial data recorded. This findspot is known as 'Nr Loughborough', grid reference and parish protected.

Record ID: LEIC-1296D3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle and plate, 52mm long, 25mm wide and 4mm thick. The object is in fair condition and weighs 8.82 grams. The object consists of a complete one piece buckle plate which is folded over the buckle loop and held in place with two copper alloy rivets. This has no signs of decoration. The buckle loop is oval and has a rectangular protruding pin rest c. 15mm wide which is decorated with incised transverse lines. The buckle pin is also present and has a rectangular section and a tapering point.
Created on: Wednesday 2nd November 2011
Last updated: Wednesday 2nd November 2011
Spatial data recorded.

Record ID: LEIC-12CE34
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval or early post Medieval copper alloy and gold hinged mount, 35mm long, 19mm wide and 7mm thick. The object is in fair condition and weighs 3.50 grams. The object consists of a sub triangular plate with a scallop shaped terminal. This is gilded and has three circular copper alloy rivets, two near the straight edge and one in the scallop area. The straight edge has two rectangular shaped protrusions which are curved over to form a hinge fitting. At this point they join together in a rectangular plate. The surface of the object is decorated with at least three incised lines which…
Created on: Wednesday 2nd November 2011
Last updated: Thursday 17th November 2016
Spatial data recorded.

Record ID: LEIC-3F5015
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy and gold buckle plate, 21mm long, 18mm wide and 2mm thick. The object i in fair condition and weighs 2.68grams. It is rectangular in form and has a relief image of three persons one appears to be sitting, flanked by the others. This figure may have a halo? If so it would suggest an image of Christ. The surface is gilded in places and there is s circular hole at one corner.
Created on: Friday 5th November 2010
Last updated: Sunday 20th September 2020
Spatial data recorded.

Record ID: LEIC-37E6B4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle with integral plate, Length: 44 mm, width: 19 mm, thickness: 5 mm, weight: 6.57 grams. The buckle has an oval frame with a semi-circular cross-section, and this is cast in one with a small sub-triangular plate. The plate has a centrally placed circular hole for the pin sitting in the middle of a ridge running across the plate. Behind this, in the centre of the plate, is a circular rivet hole. The plate tapers into a narrow short shaft which terminates in a wider triangular terminal, perhaps in the shape of an arrow or a fleur-de-lis. A single rivet is p…
Created on: Thursday 21st September 2017
Last updated: Tuesday 20th February 2018
Spatial data recorded.

Record ID: LEIC-8C1A05
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post Medieval copper alloy buckle, 32mm long, 22mm wide and weighing 4.63g. The buckle is sub-rectangular in form and D shaped in cross section and is double looped. It has a central pin bar separating two sub circular loops. The buckle has small rounded projections at each end of the pin bar and two on each loop, at the outer 'corners' . The buckle is of a type dated to 1550-1650 in Whitehead, R. Buckles 1250-1800 p.63
Created on: Tuesday 18th June 2019
Last updated: Tuesday 18th June 2019
Spatial data recorded.

Record ID: LEIC-96C067
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle plate, 28mm long, 19mm wide and 4mm thick. The object is in fair condition and weighs 4.13grams. It consists of a rectangular plate which has a copper alloy rivet in each corner. Its upper surface is decorated with an incised rectangle which encloses the rivets. It has a central incised X whose arms terminate at the rivets. On one end it has a U shaped plate which is folded over to form two suspension loops. This is held in place by two of the rivets. The object is missing some of its edges and has patches of reddish corrosion.
Created on: Monday 2nd April 2012
Last updated: Monday 2nd April 2012
Spatial data recorded.

Record ID: LEIC-9BA913
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 20mm long, 17mm wide and 6mm thick. It consists of a D shaped plate which widens towards the centre and is set at an angle. It has a narrow circular sectioned bar which has two sub-spherical knops where it joins the curved plate. The plate is decorated with three (one now missing) rivet like cylindrical protrusions. In form it is similar to 14th century buckles, but none have the rivet like attachments. (see page 20, figs 66-8, in Whitehead, R. Buckles 1250-1800).
Created on: Monday 2nd April 2012
Last updated: Monday 2nd April 2012
Spatial data recorded.

Record ID: LEIC-9BD0F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle (clasp fastener), 35mm long, 9mm wide and 3mm thick. It consists of a rectangular plate formed of a single sheet folded over and held by a single rivet. This is folded around a 'loop' which has a rectangular form and section and has two slightly bowed sides. On the outer edge of this is a further short plate which is folded around the 'loop' and terminates with a rectangular protrusion which has a rounded rectangular plate attached to its outer surface. The object matches clasp fasteners illustrated in Whitehead, R. Buckles 1250-1800, page 40-1.
Created on: Monday 2nd April 2012
Last updated: Monday 2nd April 2012
Spatial data recorded.

Record ID: LEIC-8BE932
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Published
Early medieval copper alloy buckle, 42mm long, 24mm wide and 12mm thick witha weight of 22.78g. The buckle consists of a D shaped circular cross sectioned, plain loop which swells in its centre. The loop narrows to a recessed circular section bar onto which is attached a folded plate. The plate has a thick circular shaped upper surface with a thinner, rectangular lower surface and these are rivetted together through the centre of the circular portion. A rectangular slit in this allows the fixing of a large buckle tongue. This has a rectangular cross sectioend, circular loop fixing it …
Created on: Thursday 20th October 2016
Last updated: Friday 3rd August 2018
Spatial data recorded. This findspot is known as 'Elton', grid reference and parish protected.

Record ID: LEIC-82C7D2
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Early Medieval copper alloy buckle fragment, 23mm long, 14mm wide and 4mm thick with a weight of 2.91grams. The object consists of a semi-circular cross sectioned shaft, forming a tongue, with a downwards curving, tapering end. This sits below a raised rectangular frame with rounded upper edge and tapering sides, known as a 'violin ' shaped setting. This would have contained a stone or glass inlay which is now missing. This is surrounded by a flat plate the same shape which is c. 3mm wide and is gilded on most of its surface, as is the outer edge of the frame. The reverse of this has …
Created on: Wednesday 7th December 2016
Last updated: Friday 6th January 2017
Spatial data recorded.

Record ID: LEIC-83B99C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post medieval copper alloy buckle, 24mm long, 24mm wide and 3mm thick with a weight of 4.42grams. The frame is rectangular in form and cross section. It has a wider end with rounded corners forming the pin rest, which is marked by two diagonal notches in the centre of that side . It has a semi-circualr cross section tapering pin, wrapped around the frame.
Created on: Wednesday 7th December 2016
Last updated: Monday 20th February 2017
Spatial data recorded.

Record ID: LEIC-A02D73
Object type: BUCKLE
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval copper alloy buckle, 27mm in length, 17mm wide and 4mm thick with a weight of 2.68grams. The object is in fair condition and complete except for it spin. It has a sub-rectangular form and rectangular cross section. It has an offset pin bar and two rounded narrow edges which hold a four lobed expanded pin rest.
Created on: Thursday 28th July 2016
Last updated: Thursday 4th August 2016
Spatial data recorded. This findspot is known as 'Nottinghamshire', grid reference and parish protected.