Record ID: LEIC-48AE96
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy harness pendant, 65mm long and 33mm wide. The object consists of two articulated parts, the first is made up of a circle with a plain central raised boss. this is decorated with an incised circle along the edge of the boss, which has incised triangles protruding to the edges, which resemble a star. the gaps in between this are decorated with punched circles. It has a rivet hole top and bottom, the bottom rivet is intact, and at its base there is a folded hinge, 12mm in length, holding a pin in place. A larger circle is attached to this pin with a suspension loop.…
Created on: Monday 8th December 2003
Last updated: Tuesday 1st December 2020
No spatial data available.

Record ID: LEIC-DE1C13
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Published
Medieval Copper alloy shield shaped pendant, 43mm long and 24mm wide. The pendant is diamond shaped and has an integral upper loop rotated 90o. The surface is decorated with a chequeroard pattern, of 8mm squares, with each alternate square being slightly recessed. There is a very slight trace of gilt on the surface.
Created on: Tuesday 9th March 2004
Last updated: Monday 21st March 2011
Spatial data recorded.

Record ID: LEIC-FA6C71
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval Copper alloy Horse harness pendant, 47mm high and 39mm wide. The harness consists of an upper loop, 12mm high, which emerges from the body of the mount as a flat sheet but then quickly becomes circular in section. The mount is rectangular and has a raised border 4mm wide. Inside this border is an embossed depiction of a griffin. It faces left and has one front paw raised. It has thin wings and a curvy tail with a pointed end. Its head is small with long ears protruding from the back. The work is very cartoon like with little detail. There is a single fixing hole centred along …
Created on: Friday 16th April 2004
Last updated: Monday 21st March 2011
No spatial data available.

Record ID: LEIC-CEC157
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant, 50mm long and 34mm wide. The object represents the outer frame of a suspended horse pendant. It is roughly circular in form and semicircular in section. It is made up of five curves which are seperated by a raised band cutting across the object. This frame is bevelled on its inner surface and it has a suspension fitting which is oblong in form and square in section. This has a small hole in each side near the top, which would have held a rivet that suspended the inner pendant. The object has a small circular suspension loop.
Created on: Monday 26th April 2004
Last updated: Tuesday 27th September 2016
No spatial data available.

Record ID: LEIC-25DB23
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper-alloy shield-shaped pendant mount, 20mm long and 17mm wide. The mount is very worn and corroded and is missing some edges. It shows the three lions of England, one above the other with each decreasing in size towards the base. The lowest lion still has traces of its original surface and shows areas of gilding and red enamel inlay. The lions of England were the royal arms until 1340, when they were quartered with the arms of France. The three lions design may have continued despite this change. The mount probably dates to the 13th or 14th century.
Created on: Wednesday 12th May 2004
Last updated: Tuesday 13th April 2021
Spatial data recorded.

Record ID: LEIC-022AC2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy shield shaped harness pendant, 40mm long, 25mm wide and 2mm thick. The object is inlaid with blue enamel which forms the outline of a lion rampant. The enamel may have been red originally, if so this may be the heraldic emblem of Simon De MontFort. The object is in good condition with the intergral loop still attached to its upper surface.
Created on: Wednesday 16th June 2004
Last updated: Tuesday 3rd October 2017
No spatial data available.

Record ID: LEIC-0B2493
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy shield shaped harness pendant, 44mm long and 27mm wide. The pendant is decoarted with three plantagonet lions surrounded with red enamel. the pendant has a central oval suspension loop which has broken.
Created on: Tuesday 9th November 2004
Last updated: Monday 23rd November 2020
No spatial data available.

Record ID: LEIC-8D0187
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant (probably), 3mm thick and 17mm in diameter. The mount consist of a central circle which is decorated with enamel. It has a central cross motif surrounded by red enamel and enclosed in a circular border. In between this and the edge is a field of blue enamel with 8 small raised dots which are attached to the inner border by a short raised line. The object is bordered by 6 (originally 8) rounded protrusions which have leaf decoration within them. One of these has an intact rivet through its centre. The back is plain and has traces of gilding.
Created on: Monday 15th November 2004
Last updated: Wednesday 4th October 2017
Spatial data recorded.

Record ID: LEIC-9E5650
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant, 33mm long, 21mm wide with a weight of 4.71 grams. The pendant is in fair condition, having a corroded surface but still showing its design. The pendant is shield shaped and has an integral loop which is 6mm wide. The decoration shows three parallel lines running from top left to bottom right. Below this are three probable lions rampant in a row. The upper corner has similar motifs which may be lione and are arranged in a triangle. None of the enamel is present.
Created on: Tuesday 16th November 2004
Last updated: Wednesday 4th October 2017
No spatial data available.

Record ID: LEIC-B44B34
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant, 33mm long, 30mm wide with a weight of 9.34grams. The mount is in good conditon with a brown patina and traces of gilding all over the surface. The object is rectangular and has a domed rivet through its centre which also makes up the centrepiece of the decoration. It has a suspension loop in the centre of its upper surface and the upper corners have been clipped off. The decoration consists of a six petalled incised flower with the domed rivet at its centre. outside the flower the object is covered with stamped circular motifs contained in an inc…
Created on: Monday 29th November 2004
Last updated: Wednesday 26th July 2017
Spatial data recorded.

Record ID: LEIC-A32E56
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy horse harness pendant, 27mm long, 23mm wide, 3mm thick, with a weight of 8.65grams. The pendant is shield shaped and has an integral suspension loop in the centre of its upper edge. It is decorated with three chevrons of Red enamel set into the surface.
Created on: Wednesday 9th February 2005
Last updated: Wednesday 4th October 2017
No spatial data available.

Record ID: LEIC-8D8B91
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy heraldic harness pendant, 39mm long and 29mm wide. The pendant is lozenge shaped and is missing most of its suspension loop. It has a greenish patina and has all its enamel intact. The heraldic device is made up of a central plain chevron surrounded by enamel. The upper part is decorated with 5? ornate crosses, laid out as another chevron, which show as voids in the enamel. The lower part is formed of a lozenge shaped area of enamel which contains four more outlines of the same crosses. The finder has tracked this device down to a possible Roger De Berkely from G…
Created on: Wednesday 4th May 2005
Last updated: Monday 25th September 2017
Spatial data recorded. This findspot is known as 'sapcote', grid reference and parish protected.

Record ID: LEIC-7043D4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy, gilt and enamel heraldic pendant, 26mm long and 14mm wide. The object is in a fair condition with a green patina. The object has a suspension loop 8mm long and 4mm thick with a small hole. The suspension loop merges into a ridge which runs down the centre of the reverse. The pendant is shield shaped and has patches of red enamel on its surface. The pattern has been obscured but may represent the plantagenet lions. It has a large patch of gilding at the junction of the shield and loop.
Created on: Wednesday 8th June 2005
Last updated: Friday 6th October 2017
Spatial data recorded.

Record ID: LEIC-8301B4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant, 33mm long and 18mm wide. The object is in fair condition with a brown surface and patches of green corrosion. The pendant is scutiform and is decorated with a device consisting of three crescent moons on their sides with a flower motif above. The loop is 8mm long and is slightly bent. The reverse is plain.
Created on: Thursday 9th June 2005
Last updated: Sunday 12th March 2017
Spatial data recorded.

Record ID: LEIC-8834C3
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Published
Medieval copper alloy harness pendant, 20mm long and 19mm wide. The object is in a fair condition with a pale brown patina. The object is rectangular with an elongated suspension loop, 13mm long and 6mm wide, which is centrally placed on the upper surface. The object has a raised border which is given a pie crust appearance by the prescence of lentoid shaped cut outs along its edge. The central area is decorated with a central raised circle, 4mm in diameter, which is surrounded by a rectangular area of what appears to be sheet metal. It has a grey/purple patina and is extremely thin. …
Created on: Tuesday 9th August 2005
Last updated: Monday 18th September 2017
Spatial data recorded.

Record ID: LEIC-6499C2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy and enamel horse harness pendant, 45mm long and 27mm wide. The object is in a fair condition and weighs 8.09grams. It is shield shaped and has a suspension loop centrally placed on its upper edge. It is decorated with five left facing 'rook like' birds which are surrounded by red enamel. The birds are divided into two rows, three at the top and two at the bottom, by a broad raised horizontal band.
Created on: Wednesday 19th October 2005
Last updated: Thursday 28th September 2017
Spatial data recorded.

Record ID: LEIC-00ADA2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy and enamel horse harness pendant, 31mm long, 22mm wide and 2mm thick. The object is in poor condition, missing its edges and some surface, it has a brown patina and weighs 4.92 grams. The object is now sub triangular in form and has the remains of a suspension loop in its upper surface. Its surface is largely covered in blue enamel which has recesses where other material has been. The pattern appears to be a series of diagonal lines separating animal motifs, possibly lions, the Bohun arms.
Created on: Wednesday 14th December 2005
Last updated: Friday 18th September 2020
Spatial data recorded.

Record ID: LEIC-F2F0C6
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy harness pendant, 42mm long and 30mm wide. The object is in fair condition with a reddish green patina and weighs 4.62 grams. The object consists of a thin, 0.5mm, undecorated rectangular plate with rounded corners. It has an integral almond shaped suspension loop, 12mm long and 7mm wide, which has a circular hole, 2mm in diameter.
Created on: Tuesday 31st January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-72C2A5
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval copper alloy and enamel harness pendant, 33mm long, 27mm wide and 3mm thick. The object represents the central part of a two piece hinged pendant and is in a fair condition with a brown patina and a weight of 5.85grams. The object is sub circular with six protruding points which have trefoil terminals (the upper one contains a suspension loop, now worn). The centre is decorated with an area of red enamel which echoes the form of the object. It has six points, joined by concave archs and in its centre it is missing an area of enamel in the shape of a greek cross.
Created on: Monday 6th February 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LEIC-335DC4
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A medieval gilt copper-alloy harness pendant fragment, 26mm long, 21mm wide and 3.1mm thick. The object is in a poor condition with a green patina and a weight of 3.47 grams. The object is made of very degraded copper alloy and all of one surface is thickly gilded. The object is incomplete and is flat. It has a lower curved edge which is decorated with an incised border of squares. above this is a cut out triangular area surronded by what appears to be a pointed arch, which is decorated with two incised lines. On either side of this are small protrusions which may be the remains of fu…
Created on: Wednesday 15th February 2006
Last updated: Thursday 15th October 2015
Spatial data recorded.