Back to simple search | Back to advanced search

    You searched for:

    • IdentifierID: 0013F2A2CDF01065
    • Primary material: Copper alloy
    • Object type: BUCKLE

  • Thumbnail image of LEIC-92303D

Record ID: LEIC-92303D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy possible buckle plate? 28mm long, 24mm wide and 2mm thick with a weight of 6.42g. The object consists of a rectangular plate with a rectangular cross section. It has a circular hole in each corner (one incomplete) and a slightly larger one, positioned just off centre. The object could be part of a buckle plate or other belt fitting and is probably Medieval in date.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Cadeby', grid reference and parish protected.


  • Thumbnail image of LEIC-921617

Record ID: LEIC-921617
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle plate, 37mm long, 23mm wide and 2mm thick with a weight of 3.46g. The object consists of a rectangular plate with two small incomplete rounded rectangles, which would have formed frame loops, projecting from one short edge. The object is incomplete but has a raised edge containing a stylised w beast, probably a winged griffin. It has a small circular hole in its complete corner opposite its fixing loops and this has traces of gilding around it. The decoration is probably a devolved version of YORYM-066D9E which is dated to 1200-1300AD.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Knapwell', grid reference and parish protected.


  • Thumbnail image of LEIC-91B980

Record ID: LEIC-91B980
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy spur buckle, 32mm long, 18mm wide and 6mm thick with a weight of 5.09g. The object consists of an incomplete rectangular loop with an attached rectangular frame joined with a recessed collar, all with a rectangular cross section. The loop has part of a pin fitted through a circular hole just beyond the loop. The buckle is very similar to NMS-28D1ED.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.


  • Thumbnail image of LEIC-917DEC

Record ID: LEIC-917DEC
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval copper alloy Borre style buckle, 30mm long, 23mm wide and 4mm thick with a weight of 3.35g. The object consists of an oval loop with a circular cross section. This has an elongated triangular pin rest in the form of an animal head. This has a pointed snout, rounded head with rounded upwards pointing ears which merge into the buckle loop and flank a triangular recess designed to house the pin, now missing. At the opposite side there are two short sub rectangular cross sectioned shafts, c. 6mm apart which project outwards c 5mm. These have now incomplete looped termin…
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.


  • Thumbnail image of LEIC-3E7E75

Record ID: LEIC-3E7E75
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, 32 mm long, 22 mm wide and 3 mm thick with a weight of 2.88g. The object is sub rectangular in form with a rounded D shaped loop with D shaped cross section. It has a recessed pin bar with a slight notch to hold the pin in the outside centre. The pin rest is slightly projected with a triangular apex, which lines up with a linear depression for the pin. It has a double collar at each end where it merges into the main frame.
Created on: Monday 25th February 2019
Last updated: Monday 25th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-BD5B6A

Record ID: LEIC-BD5B6A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, 18mm in length, 19mm wide and 3mm thick with a weight of 1.85grams. The object is rectangular in form and cross section, with slightly bowed sides which widen out towards the wide outer end which contains a central pin rest.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-BD49AD

Record ID: LEIC-BD49AD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle, 24mm in length, 16mm wide and 5mm thick with a weight of 2.66grams. The object is rectangular in form and cross section, with slightly bowed sides and a recessed strap bar. The opposite edge has a slightly rounded outer edge accommodating a wide pin rest which terminates with slight knops and has a slight rounded central projection underneath the pin rest.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-9878F3

Record ID: LEIC-9878F3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval or post Medieval copper alloy buckle, 40mm in length, 37mm wide and 3mm thick with a weight of 8.26g. The buckle is a double loop type and is formed of two joining oval loops with no embellishments and has a sub rectangular cross section. These types date to 1350-1650. This eg. matches no.295, p.53 in Whitehead, R. 1996. 'Buckles 1250-1800'.
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-96CAF4

Record ID: LEIC-96CAF4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy disc on pin buckle pin, 27mm in length, 17mm wide and 4mm thick with a weight of 3.45grams. The buckle pin is circular in form and rectangular in cross section. It consists of a pin with a circular plate in its centre and this has four sub-spherical projections riveted onto it. At opposing ends are two projections. One forms a partial loop to attach to the buckle loop and the other the tapering pin. Redmayne type A4.
Created on: Tuesday 5th February 2019
Last updated: Monday 18th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-96856E

Record ID: LEIC-96856E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle ? 32mm in length, 23mm wide and 4mm thick with a weight of 5.61g. The object is sub circular in form and sub rectangular in cross section. It appears to be ely D shaped with a wider curved side and now broken, thinner straight edge which suggests a pin bar.
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-9663A2

Record ID: LEIC-9663A2
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy zoomorphic buckle. 30mm in length, 23mm wide and 11mm thick with a weight of 14.27g. The object is sub rectangular in form and cross section and takes the form of a backwards facing dog or lion. It has a thin body with pronounced shoulders and thighs. It has very worn decoration around its neck, suggesting a mane. Its legs are joined in pairs with the feet only de-marked by a linear depression on the base. The two pairs of legs are joined by a flat bar across the base. This holds a very corroded iron pin which runs up to the animals shoulder. Good examples of s…
Created on: Tuesday 5th February 2019
Last updated: Friday 15th February 2019
Spatial data recorded.


  • Thumbnail image of LEIC-7465E3

Record ID: LEIC-7465E3
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval / Medieval copper alloy buckle, Length: 28 mm, width: 25 mm, thickness: 2 mm, weight: 3.13 g. The buckle is sub rectangular in form and rectangular in cross section. It is five sided externally and has a D shaped internal void. It has a narrow offset pin bar and its sides have angled projections with slightly rounded knops. It has a central projecting tri-lobed pin rest which has incised depressions divided each lobe. Its frame has very worn traces of a dot in ring motif. The buckles decoration is devolved 'Ringerike' and based on examples such as GLO-20D4FE Two very si…
Created on: Thursday 10th January 2019
Last updated: Thursday 24th January 2019
Spatial data recorded. This findspot is known as 'Peckleton', grid reference and parish protected.


  • Thumbnail image of LEIC-FCD784

Record ID: LEIC-FCD784
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy single looped buckle, 19mm in length, 17mm wide and 3mm thick with a weight of 2.03grams. The buckle is sub circular in form and rectangular in cross section. The frame has rounded sides with a narrow offset strap bar at one end and a wider rectangular pin rest at the other. This is is recessed to house a copper alloy sheet roller, now missing. cf. Egan and Pritchard 1991, 76.
Created on: Tuesday 11th December 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.


  • Thumbnail image of LEIC-FCB946

Record ID: LEIC-FCB946
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle. 32mm in length, 27mm wide and 5mm thick with a weight of 5.48grams. The frame is sub rectangular in form and cross section. It comprises a larger plain oval shaped loop with a joining smaller rectangular loop to house a strap. In between the two is a central bar which has a central recessed area hold the pin, which is still partially wrapped around it. A similar example is illustrated by Egan & Pritchard (2002: 103, no. 472) from a phase dated by ceramics to c. 1400-1450. cf. similar examples on this database: PUBLIC-4B301F, PUBLIC-5125E3, NLM-7C38…
Created on: Tuesday 11th December 2018
Last updated: Wednesday 20th March 2019
Spatial data recorded.


  • Thumbnail image of LEIC-FC93DD

Record ID: LEIC-FC93DD
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle. 35mm in length, 14mm wide and 4mm thick with a weight of 4.43grams. The object is trapezoidal in form with a rectangular cross section. It consists of a semi -circular short shaft which is plain and incomplete. This runs into a trapezoidal 'loop' starting with a raised collar butting up to a plain rectangular plate. This has a small central hole just beyond the collar and a larger one at the far end which houses a tapering folded pin. At the far end of the 'loop' is a further flat plate which has a slight raised collar next to the loop and then a row of …
Created on: Tuesday 11th December 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.


  • Thumbnail image of LEIC-D5153A

Record ID: LEIC-D5153A
Object type: BUCKLE
Broad period: MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle plate, 32mm in length, 19mm wide and 1mm thick with a weight of 7.84grams. The plate is rectangular in form and cross section. It is formed of a folded sheet with part of the buckle frame still inside the fold. The buckle pin emerges from sub rectangular hole in the centre of the folded edge. The far edge has two circular holes in each corner which still house the rivets on one plate. One face has an inscribed abstract design, consisting of several wavy lines in an incised rectangular border.
Created on: Tuesday 27th November 2018
Last updated: Monday 3rd December 2018
Spatial data recorded. This findspot is known as 'Huntingdonshire', grid reference and parish protected.


  • Thumbnail image of LEIC-97A7B4

Record ID: LEIC-97A7B4
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy integral buckle plate and frame, 29mm long, 20mm wide and 5mm thick with a weight of 10.29g. The plate is of two part construction and is incomplete. It has rectangular form and cross section, having an upper plate with integral narrow sides. Its has a recessed border across the edge which adjoins the frame. The two components are joined by a recessed collar which joins it to its oval frame, now incomplete. The frames base has a raised sub-rectangular bar, which houses a circular hole, centrally placed, for the intact pin. The upper plate has a solid raised borde…
Created on: Monday 12th November 2018
Last updated: Monday 12th November 2018
Spatial data recorded.


  • Thumbnail image of LEIC-45954C

Record ID: LEIC-45954C
Object type: BUCKLE
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle and intergal plate, c. 35mm long and 12mm wide, with a weight of 3.3g. The object is sub rectangular in form and rectangular in cross section. It consists of a rectangular shaped single loop buckle frame, with a slightly off set short end, which is attached to a probably semi-circular cross sectioned shaft with worn edges suggesting it is incomplete. Where the two join there is a swelling to accomodate a circular hole which would have held the pin and below this (as shown) is a hole which is filled with a circular cross sectioned rivet. These are often re…
Created on: Thursday 8th November 2018
Last updated: Thursday 8th November 2018
Spatial data recorded.


  • Thumbnail image of LEIC-709A5D

Record ID: LEIC-709A5D
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Medieval copper alloy buckle fragment, 23mm long, 15mm wide and 5mm thick with a weight of 3.10g. The buckle is triangular in form and rectangular in cross section. It forms just over half a buckle and has a D shpaed loop which extends slightly past the central pin bar. The loop terminates in a triangular shaped projection, which may represents a worn animal head? The buckle is curved in profile, proibably to accomodate a strap.
Created on: Monday 29th October 2018
Last updated: Monday 29th October 2018
Spatial data recorded.


  • Thumbnail image of LEIC-708408

Record ID: LEIC-708408
Object type: BUCKLE
Broad period: MEDIEVAL
County: Rutland
Workflow stage: Awaiting validation Find awaiting validation
Medieval/Post Medieval copper alloy double looped buckle, 32mm long, 28mm wide and 3mm thick with a weight of 5.30g. The buckle is oval in form and rectangular in cross section. It is formed of a double loop with a central pin bar. Each outer edge is decorated with three incised transverse lines. The object is similar to no 289 p.53 in Whiteheads Buckles, which he has dated to 1350-1650
Created on: Monday 29th October 2018
Last updated: Monday 29th October 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 342
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 344
  • Mean quantity: 1.006
  • Maximum: 3

Filter your search

Denomination

1 - 20 of 342 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.