Record ID: LEIC-D600B5
Object type: BROOCH
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Two Late Medieval copper alloy annular brooches. The frames have a circular section with a circular sectioned pin which is attached by a loop formed of its end. The first is 42mm in diameter with a narrower width at 4mm and weighs 11.31 grams. This example has a pronounced rectangular section at the neck of the pin. The second (lower photo) is 48mm in diameter, 5mm wide and weighs 33.5 grams. It has no decoration.
Created on: Tuesday 19th April 2011
Last updated: Monday 27th July 2020
Spatial data recorded.

Record ID: LEIC-A27227
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy sestertius of Antoninus Pius, (posthumus issue) 162, Rome.
Created on: Wednesday 22nd September 2010
Last updated: Thursday 30th August 2012
Spatial data recorded.

Record ID: LEIC-5E9C18
Object type: BROOCH
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy brooch fragment, 23mm long, 15mm wide and 3mm thick. The object is in fair condition and weighs 2.25grams. It consists of one half of an annular brooch which has a semi-circular section with circular depressions (three present) in its upper surface. It is similar in form to eg.1317 in Egan and Pritchard, 'Dress Accessories'.
Created on: Friday 1st October 2010
Last updated: Friday 15th May 2020
Spatial data recorded.

Record ID: LEIC-77D6E6
Object type: AWL
Broad period: BRONZE AGE
County: Warwickshire
Workflow stage: Awaiting validation
Bronze age/Iron age? copper alloy awl? 55mm long, 10 mm in diameter and weighing 13.02grams. The object is in fair condition with a lot of its surface mssing. It is circular in section, with one half being wider than the other. each half tapers to a sharp point.
Created on: Friday 26th August 2011
Last updated: Friday 26th August 2011
Spatial data recorded.

Record ID: LEIC-CC59A3
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy seal matrix, 28mm long, 17mm wide and 3mm thick. The object is in poor condition and weighs 5.57grams. It is 'lentoid' in form (oval with pointed ends). The inscription and the central design are illegible. Its reverse has a long tapering ridge with an integral suspension loop.
Created on: Tuesday 30th August 2011
Last updated: Friday 17th July 2020
Spatial data recorded.

Record ID: LEIC-71E2B1
Object type: MOUNT
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
Iron age copper alloy vessel handle fragment, 27mm long and 14mm and 4mm thick. The object is in fair condition and weighs 4.57grams. The object is sub rectangular in form and section and consists of two semi-circular sectioned arms which merge together and then begin to seperate again. At this point the object has a solid 'plate' between the two arms and it turns C. 45 degrees. It has a semi-circular edge which contains a circular fixing hole. It is vaguely similar to WMID-189215 and SF-2374. The object is probably a type described as 'Mirror types' by Corcorhan as they resemble …
Created on: Monday 19th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded.

Record ID: LEIC-725487
Object type: PESTLE
Broad period: IRON AGE
County: Warwickshire
Workflow stage: Awaiting validation
Iron age pestle fragment?, 31mm long and 6mm and 5mm thick. The object is in fair condition and weighs 3.04grams. The object is sub circular in section and linear in form. It is slightly curved and at one end widens out before tapering to a point. The object is probably a very corroded Pestle from a cosmetic set, its form is very similar to one of the cover of Jackson, R. 'Cosmetic sets of late Iron age and Roman Britain' type 286b?
Created on: Monday 19th September 2011
Last updated: Monday 29th April 2013
Spatial data recorded.

Record ID: LEIC-EE1341
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early Medieval copper alloy strap end, 35mm long, 13mm wide and 1mm thick. The object is in faor condition and weighs 2.36grams. The object is rectangular in section and form with slightly bowed sides. It is decorated with a rectangular panel containing incised triangles and lines forming a geometric 'interlace'. Below this is an animal head with rounded ears. The object matches Thomas class A2.
Created on: Friday 7th October 2011
Last updated: Wednesday 5th August 2015
Spatial data recorded.

Record ID: LEIC-EE5643
Object type: STRAP END
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval copper alloy strap end, 46mm long, 15mm wide and 1mm thick. The object is in fair condition and weighs 2.65grams. The object consists of one plate from a two piece strap end and is rectangular in form with a rounded lower edge and rectangular in cross section. It has two circular holes, one in each corner, close to its short straight edge, one has an intact rivet in place. It is decorated with an incised border containing an incised pattern consisting of wavy lines which appear to represent a writhing beast, possibly a Wyvern? There is a possible curved neck, rounded back wit…
Created on: Friday 7th October 2011
Last updated: Monday 19th November 2018
Spatial data recorded.

Record ID: LEIC-F17E44
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy dolphin variant brooch, 34mm long, 17mm wide and 12mm thick. The object is in fair condition with a green patina and weighs 6.63grams. The brooch has short semi-circular wings which contain a spring of seven coils. The bow is rectangular in section and tapers to a point. It is decorated with a semi-circular sectioned ridge which runs its length. The bow forms a catchplate as it narrows this is present, but not complete.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F18881
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early post medieval gilded copper alloy buckle, 41mm long, 21mm wide and 3mm thick. The object is in fair condition with a brown patina and weighs 4.98grams. The buckle is double looped with a sub rectangular section. It hassub circular protrusions at each end and its surface is decorated with punched circles. The whole of the upper surface has patches of gilding present. The pin is missing.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F194D6
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Medieval? copper alloy suspension mount, 24mm long, 24mm wide and 7mm thick. The object is in fair condition with a dark brown patina and weighs 17.51grams. The objectis semi-circular in form and rectangular in section. It has a circular hole and shows traces of attachment on its flat underside. It may be a handle fitting from a cauldron or other copper alloy vessel.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F1B724
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy brooch fragment, 17mm long, 14mm wide and 6mm thick. The object is in fair condition with a green patina and weighs 3.83grams. The object consists of the upper part of a bow brooch with short semi-circular wings containing a spring of seven coils.
Created on: Thursday 17th July 2008
Last updated: Wednesday 6th February 2013
No spatial data available.

Record ID: LEIC-F1C265
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy Poldeh hill brooch, 22mm long, 16mm wide and 8mm thick. The object is in fair condition with a brown patina and weighs 4.29grams. The brooch has short semi-circular wings which are worn and have no spring prsent. The bow is semi-circular in section and tapers to a point, there is no sign of a catchplate.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F1DBD5
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus, possibly of Constans? dating to the period AD 330 to 350 (Reece Period 18). FEL TEMP REPARATIO reverse type depicting Emperor standing over captive with standard in left hand.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F1E592
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus, possibly of Constans? dating to the period AD 335 to 341 (Reece Period 17). GLORIA EXERCITVS reverse type depicting two soldiers with one standard.
Created on: Thursday 17th July 2008
Last updated: Monday 24th January 2022
No spatial data available.

Record ID: LEIC-F1EC33
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus of Constans dating to the period AD 343 to 348 (Reece Period 17). VICTORIA AVG VSTORVM reverse type depicting victory on prow?
Created on: Thursday 17th July 2008
Last updated: Monday 10th January 2022
No spatial data available.

Record ID: LEIC-919818
Object type: COIN
Broad period: ROMAN
County: Warwickshire
Workflow stage: Awaiting validation
Roman copper alloy nummus, probably of Constantius II. Reece PEriod 17
Created on: Tuesday 26th September 2006
Last updated: Thursday 30th April 2020
Spatial data recorded.

Record ID: LEIC-6C7D97
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Early Medieval copper alloy brooch fragment, 27mm long, 12mm wide and 4mm thick. The object is in poor condition, being very worn, with a green patina and weighs 3.69 grams. The fragment is sub rectangular in form and has a semi-circular section. It consists of part of the bow of a brooch and has the remains of a catchplate running down the centre of its reverse. The front has two distinct areas of decoration, the lower part is made up of five horizontal raised ridges and its upper part has a chamferred surface. It matches very closely with the corresponding part of brooch 1300 in Hat…
Created on: Friday 24th November 2006
Last updated: Thursday 30th April 2020
Spatial data recorded.

Record ID: LEIC-6C8AF4
Object type: MOUNT
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
Late Medieval or post medieval copper alloy mount, 21mm long, 21mm wide and 1mm thick. The object is in fair condition with a green patina and weighs 1.01 grams. The object is rectangular in form and consists of a bird portrait within a raised frame. The frame is plain and has overlapping edges which form two sub circular protrusions at each corner. Within each corner is a stylised four petalled flower motif. The portrait consists of a bird standing on the ground with its wings outstretched behind it, facing what appears to be an upright twig or plant stem. The reverse of the object ha…
Created on: Friday 24th November 2006
Last updated: Thursday 24th February 2011
Spatial data recorded.