Record ID: LEIC-47BF1A
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated? copper alloy casting waste or gaming piece? 13mm in length, 12mm wide, 6mm thick with a weight of 3.42g. The object is D-shaped in section and irregular in shape.
Created on: Tuesday 9th July 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-8CC78D
Object type: MOUNT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Two undated identical copper alloy mounts 1) 54mm long, 23mm wide and 1mm thick 2) 67mm in length, 22mm wide, 1mm thick with a combined weight of 11.32g. The objects are rectangular in form and cross section and consist of plain tapering shafts which have broken off. Each one has a terminal with a central rounded recess, flanked by linear projection in each corner. This turns outwards and back on itself, touching the side of the object and then kicking outwards, with the longer one terminating in spirals. Below this each object is decorated with an incised chevron, whose apex runs …
Created on: Tuesday 18th June 2019
Last updated: Wednesday 19th June 2019
Spatial data recorded.

Record ID: LEIC-F97B32
Object type: FIGURINE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy figure or weight, 42mm in length, 26mm wide, 7mm thick with a weight of 43.69g. The object is sub rectangular in form and cross section and at one end has opposing small sub rectangular projections which may be arms. Its main body has a waisted centre, whose form suggests a tunic drooping over a belt? Below this the object has a slightly flaring sub triangular form which may represent the skirt of a short tunic? The object appears to have at least one projection at this end, which could suggest legs. The opposite end has a central scar showing it is incomplete an…
Created on: Tuesday 11th June 2019
Last updated: Friday 14th June 2019
Spatial data recorded. This findspot is known as 'Peckleton', grid reference and parish protected.

Record ID: LEIC-AC0FE9
Object type: WEIGHT
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Undated lead alloy weight, 25mm in length, 19mm in diameter, with a weight of 37.46g. The object has a bi-conical form and a circular cross section with a central hole, c. 7mm in diameter. The only possible decoration is a raised collar/ridge running across its centre.
Created on: Tuesday 14th May 2019
Last updated: Friday 7th June 2019
Spatial data recorded.

Record ID: LEIC-ABB007
Object type: BEAD
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Undated ceramic or possibly corroded glass? bead, 9mm thick, 15mm diameter, with a weight of 2.92g. The bead is circular in form and sub rectangular in cross section. It has a large central circular hole, 7mm in diameter and no visible decoration.
Created on: Tuesday 14th May 2019
Last updated: Friday 7th June 2019
Spatial data recorded.

Record ID: LEIC-AB4522
Object type: BEAD
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Undated copper alloy bead / shield clip ? 16mm in length, 7mm wide, 8mm thick, with a weight of 1.08g. The object is rectangular in form and circular in cross section. It appears to be formed of a sheet that has been folded into a sub-circular section, but it is damaged at this point so can't be confirmed. Its surface consists of four slightly raised rounded bands, which are separated by a recessed linear narrow ridge. The object is incomplete at each end and where it now joins it is hard to confirm if this was soldered or was designed to have a gap. If the former it may be a sh…
Created on: Tuesday 14th May 2019
Last updated: Friday 7th June 2019
Spatial data recorded.

Record ID: LEIC-A939D7
Object type: RING
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Undated copper alloy ring, 18mm in diameter, 3mm wide and 2.5mm thick, with a weight of 3.33g. I The object is circular in form and sub rectangular in cross section and appears to have ben filed on one surface. Objects such as this are difficult to date, but are known from the Bronze age onwards.
Created on: Tuesday 14th May 2019
Last updated: Wednesday 5th June 2019
Spatial data recorded.

Record ID: LEIC-85C092
Object type: WEIGHT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated lead alloy weight ? 75mm in length, 36mm wide and 11mm thick with a weight of 192.00grams. The object has an ovoid form and a rectangular cross section and is unmarked. This object was found at the same location as other lead objects, LEIC-85A837 and LEIC-859359 suggesting it may have been collected for metal working.
Created on: Tuesday 30th April 2019
Last updated: Friday 17th May 2019
Spatial data recorded.

Record ID: LEIC-85A837
Object type: WEIGHT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy object, possibly a pan weight or small bowl? 48mm in length, 33mm wide and 13mm thick with a weight of 48.81grams. The object is circular in form and trapezoidal in cross section and has been squashed. It consists of a flat base with outwards tapering sides. It may be part of a set of weights or a small bowl/dish for a specific purpose? This object was found at the same location as other lead objects, LEIC-85C092 and LEIC-859359 suggesting it may have been collected for metal working.
Created on: Tuesday 30th April 2019
Last updated: Friday 17th May 2019
Spatial data recorded.

Record ID: LEIC-857BCD
Object type: WEIGHT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy weight, 32mm in length, 31mm wide and 27mm thick with a weight of 117.69g. The object is sub rectangular in form and circular in cross section. It has been mis- cast or perhaps created by rolling? leaving an irregular depression running down one side, but has a central sub-circular hole in its base and its upper sub conical section has a circular suspension hole sitting just below its apex.
Created on: Tuesday 30th April 2019
Last updated: Friday 3rd May 2019
Spatial data recorded.

Record ID: LEIC-CA7256
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy fragments, suggesting casting waste. The objects ar irregular in form and sub rectangular in cross section. the smaller two are very indicative of casting waste and the larger object may be a fragment of an object or another by product of the casting process. They are recorded here as they may indicate a previously unknown industrial site . 1) 43mm in length, 32mm wide and 8mm thick with a weight of 36.29grams 2) 35mm in length, 29mm wide and 5mm thick with a weight of 28.36grams 3) 58mm in length, 41mm wide and 4mm thick with a weight of 71.00grams.
Created on: Tuesday 9th April 2019
Last updated: Friday 12th April 2019
Spatial data recorded.

Record ID: LEIC-C87AA3
Object type: WEIGHT
Broad period: UNKNOWN
County: Northamptonshire
Workflow stage: Awaiting validation
Undated lead alloy object probably a weight, 72mm in length, 42mm wide and 15mm thick with a weight of 217g. The object has an elongated oval form and a semi-circular cross section. It would have been made by creating a simple casting well as is most probably a quickly manufactured weight. It is similar to one found nearby Found clos eto a similar shaped weight LEIC-85C092
Created on: Tuesday 9th April 2019
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-C85908
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Northamptonshire
Workflow stage: Awaiting validation
Undated lead alloy and iron object, 26mm in length, 14mm wide and 6mm thick with a weight of 4.56g. The object has an openwork spherical form consisting of four rope like shafts, two are positioned very close together, which converge at its apex. a short shaft projects into the centre of the sphere and has a collar and pointed terminal. Each shaft is decorated with transverse linear depressions and the whole thing sits on a rounded collar. Below that is a circular cross sectioned iron shaft with a diagonal point. This suggests that the object may have been designed to be pushe…
Created on: Tuesday 9th April 2019
Last updated: Friday 26th April 2019
Spatial data recorded.

Record ID: LEIC-93AA7F
Object type: WEIGHT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy weight 16mm long, 14mm in diameter and weighing 14.08g. The object is sub rectangular in form and circular in cross section with a tapering form and a cemntral hole 8mm diameter.
Created on: Wednesday 13th March 2019
Last updated: Wednesday 13th March 2019
Spatial data recorded. This findspot is known as 'Cadeby', grid reference and parish protected.

Record ID: LEIC-557F25
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Roman to early Medieval? copper alloy object, 18mm in length, 12mm wide and 3mm thick with a weight of 2.01grams. The object has a trapezoidal form and rectangular cross section. It appears to be complete and has slightly tapering long edges, a rounded shorter edge (top as shown) with a slight lip running across it. Below this, centrally placed, is a circular hole c. 3mm in diameter which appears to be filled with iron? At its other short edge it has four short incised lines running to and over the edge. These suggest it is intact and that they have some function? It resembles a…
Created on: Tuesday 26th February 2019
Last updated: Wednesday 6th March 2019
Spatial data recorded.

Record ID: LEIC-BF3118
Object type: WEIGHT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated lead alloy weight, 29mm in length and 30mm in diameter with a weight of 88.73grams. The object is conical in form and circular in cross section. It has a wide base which tapers sharply, becoming a cylinder half way up its height, with a rounded flat top, 12mm diameter.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-BF186F
Object type: CROSS
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated lead alloy cruciform object, 43mm in length, 15mm wide and 2mm thick with a weight of 4.73grams. The object is crudely made, cruciform in shape and rectangular in cross section. It has a wide rectangular upper section with a partial suspension loop, short rectangular 'arms' and a long shaft below which has a D shaped cross section. Possibly a crudely made cross?
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-BEFD68
Object type: MOUNT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated copper alloy mount. 26mm in length, 20mm wide and 4mm thick with a weight of 9.85grams. The object is sub rectangular in form and rectangular in cross section. It is decorated on one side with a raised 'swirl' with a triangular cross section which fills the rounded edge of the object and sits above a rounded straight edge. Its reverse has a single centrally placed circular sectioned prong.
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-BE88D4
Object type: MOUNT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated copper alloy mount or terminal. 26mm in length and 24mm wide with a weight of 3.52grams. The object is circular in form and rectangular in cross section. It has an upper part formed of two circular plates, the smaller on top of the larger. Below this the object has tapering sides which then merge into three sub triangular shaped, rectangular cross sectioned 'legs' the object is undecorated but is of a good quality copper alloy. It may be a terminal for a hollow handle or similar?
Created on: Tuesday 19th February 2019
Last updated: Wednesday 20th February 2019
Spatial data recorded.

Record ID: LEIC-9A4769
Object type: CASTING WASTE
Broad period: UNKNOWN
Workflow stage: Awaiting validation
Undated copper alloy casting waste? One small casting droplet and a sub rectangular piece of worn metal. Left to right in photo L W T Wgt 17 15 6 2.42 30 28 6 32.43 These were found together and not far away form other signs of metal working recorded as LEIC-99FD63 which suggest signs of metal processing.
Created on: Tuesday 5th February 2019
Last updated: Tuesday 5th February 2019
No spatial data available.

Record ID: LEIC-99FD63
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
A group of undated fragmentary objects/ casting waste? Each object has a greenish/grey patina, with a hint of a shiny surface showing through in patches. The smallest is is in the form of a droplet or small casting sprue clearly diagnostic of metalworking. The next is roughly C shaped with a projecting triangular cross section. The largest has the appearance of being fractured from a large mass? and has one flat surface with diagonal striations running across it. The objects measurements from left to right in the photo are:- L W T wg…
Created on: Tuesday 5th February 2019
Last updated: Tuesday 5th February 2019
Spatial data recorded.

Record ID: LEIC-99D41B
Object type: WEIGHT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy weight, 28mm long, 24mm wide and 17mm thick with a weight of 37.47g. The object is sub circular in form and cross section. It has been crudely cast and has a small circular hole in the centre of its wider flat surface.
Created on: Tuesday 5th February 2019
Last updated: Tuesday 5th February 2019
Spatial data recorded.

Record ID: LEIC-999499
Object type: WEIGHT
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy weight, 20mm in diameter and 17mm thick with a weight of 39.13g. The object is sub circular in form with a semi-circular cross section. It has been crudely cast and has a slight lip with a circular hole in its base, just off centre and a corresponding, slightly smaller one in its upper surface.
Created on: Tuesday 5th February 2019
Last updated: Tuesday 5th February 2019
Spatial data recorded.

Record ID: LEIC-069BAE
Object type: RING
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated copper alloy ring, 4mm wide, 4mm thick and diameter of 27mm with a weight of 5.24g. The object is circular in form and sub rectangular in cross section. It is inconsistent in width and shape and has evidence of filling. These objects date from the Bronze Age onwards, but its rough shape and hand finishing suggest an earlier date.
Created on: Tuesday 29th January 2019
Last updated: Thursday 14th February 2019
Spatial data recorded.

Record ID: LEIC-7517FC
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
2 lead alloy possible pot mends or general waste, both has a sub circular form and rectangular cross section with an apparent depression running around its edge. 1) Weight: 199.00 g 2) weight: 42.79 g Found in association with a collection of lead droplets - LEIC-75095A
Created on: Thursday 10th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.

Record ID: LEIC-75095A
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated collection of lead droplets suggesting casting activity. weight: 67.2 g
Created on: Thursday 10th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Earl Shilton', grid reference and parish protected.

Record ID: LEIC-74EBD1
Object type: STRAP FITTING
Broad period: UNKNOWN
County: Cambridgeshire
Workflow stage: Awaiting validation
Undated copper alloy strap fitting, Length: 55 mm, width: 15 mm, thickness: 11 mm, weight: 40.61g. The object is incomplete and is sub rectangular in form and cross section. It consists of a upper bar with an undulating upper surface which curves round at one end then is broken, suggesting an oval shape when intact. The upper surface has a triangular projection at one end then a slight depression followed by a sub rectangular projection with transverse incised lines at each edge. The object appears to be some sort of slide or harness fitting .
Created on: Thursday 10th January 2019
Last updated: Thursday 17th January 2019
Spatial data recorded. This findspot is known as 'Knapwell', grid reference and parish protected.

Record ID: LEIC-9086F4
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
Undated lead object 40mm long, 35mm wide and 8mm thick with a weight of 25.80g. The object is sub circular in form and rectangular in cross section with a hollow underside. Its surface is decorated with an oval shaped raised line with a worn design inside. Outside long elongated triangles project with short raised lines interspersed, giving a sun-like effect. The object is squashed and its sides are damaged and incomplete, but its overall form suggest a cap or lid ?
Created on: Tuesday 18th December 2018
Last updated: Friday 11th January 2019
Spatial data recorded.

Record ID: LEIC-FD0095
Object type: CAP
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated lead alloy object, 24mm in diameter, 6mm deep and weighing 7.97grams. The object is circular in form and rectangular in cross section. It has is hollow and its inside surface is decorated with eight radiating ridges.
Created on: Tuesday 11th December 2018
Last updated: Thursday 20th December 2018
Spatial data recorded.

Record ID: LEIC-FC32A9
Object type: COLLAR
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated silver band. 36mm in length, 7mm wide and 1mm thick with a weight of 1.62grams. The object is a linear band with an incised border close to the edge on one side, and possible transverse lines in the outer border?
Created on: Tuesday 11th December 2018
Last updated: Tuesday 23rd July 2019
Spatial data recorded.

Record ID: LEIC-ABB990
Object type: MOUNT
Broad period: UNKNOWN
County: Staffordshire
Workflow stage: Awaiting validation
undated gold sheet, 15mm, long, 10mm wide and 0.25mm thick with a weight of 1.78g. The sheet is oval in form with a rectangular cross section. It is plain and appears to have been deliberately folded in half and then one edge has been folded over into the inside of the first fold. The objects full flattened length is c.28mm this and its form make it very similar to early Bronze age 'hair or basket ornaments' such as BERK-F548E6 and IOW-62FFD2, although this example has no decoration or the diagnostic rectangular projection usually found on these. It does have damage to one edge …
Created on: Tuesday 13th November 2018
Last updated: Wednesday 10th July 2019
No spatial data available.

Record ID: LEIC-36D5BD
Object type: STUD
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation
Undated copper alloy stud. 12mm thick and 20mm in diameter with a weight of 8.97grams. The stud is circular in form and semi-circular in cross section, with a projecting shaft. Its upper surface has a flat border 6mm wide, decorated with a slight step c. 1mm in. Inside this is a solid domed centre 6mm high. The underside of this section is flat and houses a circular cross sectioned shaft, 4mm in diameter and 3mm long, which terminates in a wide flat collar.
Created on: Tuesday 2nd October 2018
Last updated: Friday 19th October 2018
Spatial data recorded.

Record ID: LEIC-B73045
Object type: WEIGHT
Broad period: UNKNOWN
County: Hertfordshire
Workflow stage: Awaiting validation
Undated lead weight, Length: 17 mm, width: 15 mm, thickness: 14 mm, weight: 20 g. The weight is formed of a rectangular sheet which has been folded up into a roll, possible a net weight? See YORYM-E10746.
Created on: Wednesday 26th September 2018
Last updated: Wednesday 24th October 2018
Spatial data recorded.

Record ID: LEIC-B72256
Object type: WEIGHT
Broad period: UNKNOWN
County: Hertfordshire
Workflow stage: Awaiting validation
Three undated lead alloy weights. The weights are formed of a rectangular strip of lead which has been folded up into a roll, possibly a net weight? (1) Length: 22 mm, width: 17 mm, thickness: 12 mm, weight: 20.67 g (2) Length: 18 mm, width: 15 mm, thickness: 13 mm, weight: 23.17 g (3) Length: 24 mm, width: 13 mm, thickness: 15 mm, weight: 36.97 g See YORYM-E10746.
Created on: Wednesday 26th September 2018
Last updated: Wednesday 24th October 2018
Spatial data recorded.

Record ID: LEIC-B99C42
Object type: VESSEL
Broad period: UNKNOWN
County: Hertfordshire
Workflow stage: Awaiting validation
Undated silver fragment, possibly from a vessel or mount? 25mm long, 20mm wide and 4mm thick with a weight of 10.96g. The object is sub rectangular in form and rectangular in cross section. It has one straight edge with a rounded profile, the others being curved but irregular. On one surface, just below and running parallel to the straight edge, is an inlay of a copper coloured material which runs its length. The object appears to have been broken or cut from a larger object.
Created on: Friday 14th September 2018
Last updated: Wednesday 10th July 2019
Spatial data recorded.

Record ID: LEIC-7D41FE
Object type: MOUNT
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
Undated lead alloy mount (or possibly a pendant?), 23mm in length, 12mm wide and 5mm thick with a weight of 7.49grams. The object is sub rectangular in form and cross section with a rounded upper edge (as shown) and a straight lower edge. The upper surface is slightly rounded and has a small spherical projection, c.4mm in diameter, centrally placed below its edge and projecting forwards. below this is a reilef figure consisting of a circular head above a rectangular body and arms which appears to be worn? as at the point the figure disappears the object turns sharply downwards, pos…
Created on: Tuesday 11th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.

Record ID: LEIC-7CAF45
Object type: FIGURINE
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
An undated lead alloy figurine, 92mm in length, 34mm wide and 16mm thick with a weight of 168.00grams. The figure is crudely cast and has few datable features. It consists of a human body, probably naked and with no detail added. It has arms which are bent at the elbow, but the lower parts are now missing. Its feet are very large and are aligned to stand on a curved surface?
Created on: Tuesday 11th September 2018
Last updated: Wednesday 12th September 2018
Spatial data recorded.

Record ID: LEIC-2EB01A
Object type: MOUNT
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Undated lead alloy mount, 36mm in length, 11mm wide and 6mm thick with a weight 2.39g. The object is sub rectangular in form and cross section and appears to be hollow. It has a flat underside and a rounded upper side which rises to a slight ridge. Along its slightly tapering sides it has several shallow linear recesses which run from the flat base to the ridge. It terminates in a slightly recessed tri-lobed projection which is slightly bent. Its open end appears to be damaged and is irregular. The function of this object is unknown and it may be part of a much larger object. Its form…
Created on: Tuesday 14th August 2018
Last updated: Tuesday 2nd July 2019
Spatial data recorded.

Record ID: LEIC-2E71BC
Object type: METAL WORKING DEBRIS
Broad period: UNKNOWN
County: Rutland
Workflow stage: Awaiting validation
Two undated silver globules, metal working debris. 1) 29mm in length, 8mm wide and 7mm thick with a weight of 12.17grams. 2) 10mm in length, 10mm wide and 3mm thick with a weight of 1.91grams.
Created on: Tuesday 14th August 2018
Last updated: Thursday 23rd August 2018
Spatial data recorded.

Record ID: LEIC-2DBAA9
Object type: BEAD
Broad period: UNKNOWN
County: Leicestershire
Workflow stage: Awaiting validation
Undated glass bead, 6mm in length and 7mm in diameter. The bead has a spherical form and cross section with a small circular hole, 2.5mm in diameter, through its centre. The object has a bright blue opaque colour and is slightly damaged around the edges of the central hole.
Created on: Tuesday 14th August 2018
Last updated: Monday 20th August 2018
Spatial data recorded.