Record ID: DOR-ECCC96
Object type: CANDLE HOLDER
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A copper alloy probable candle holder. The object is in the form of a stylised cockerel with an integral conical socket, The bird has a long neck with a small, beaked head with stylised comb and wattle. There are moulded crescentic ridges on the sides of the body to indicate wings. The body extends downwards into a pair of legs, each with an angled joint and one complete with an expanded crescent shaped foot. It also extends back into a curved, spilt tail, with hooked ends. The socket flares outwards from the back and is broken and split at one sie adjacent to the neck. …
Created on: Thursday 4th April 2024
Last updated: Friday 5th April 2024
Spatial data recorded.

Record ID: DOR-E033B8
Object type: AXEHEAD
Broad period: NEOLITHIC
County: Dorset
Workflow stage: Awaiting validation
A flint axehead. A flaked axehead. Made on a nodule of pale grey-brown flint, now patinated to matt off-white and with iron staining along the flake ridges. Flaked on both faces from the edges, butt and cutting edge. All the cortex has been removed. The side edges are largely straight. It has a wide, slightly convex, cutting edge formed by flake removals from the edge into the body of the axehead. The axe tapers to the butt and has a lentoid cross section. There is some slight damage to the butt. Date: Neolithic - c. 4000 to 2350 BC Dimensions: 118 mm x 60 mm x 27&n…
Created on: Tuesday 27th February 2024
Last updated: Wednesday 28th February 2024
Spatial data recorded.

Record ID: DOR-E3B29B
Object type: PIPE TAMPER
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A complete copper alloy pipe tamper in the form of an upright hand grasping a cylindrical object with flared end (probably a scroll) The hand has long moulded fingers wrapped around the bar and a thumb and hollowed palm below. The bar flares to each end, terminanting in a flat, circular face. The ends of the bar are decorated, one end with a single circumferetnial groove, theopposite ned with two. The wrist of the hand tapers to a collar approximately halfway down the shaft, perhaps representing a cuff. The collar is decorated with a curcumferential ridge top and bottom…
Created on: Thursday 15th February 2024
Last updated: Monday 19th February 2024
No spatial data available.

Record ID: DOR-E3536E
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation
A copper alloy sestertius of Severus Alexander dating to AD 222 - 235 (Reece period 11).  Standing figure on reverse. Very little detail survivng. Date: Roman Diameter: Weight: Die axis: 12
Created on: Thursday 15th February 2024
Last updated: Monday 19th February 2024
No spatial data available.

Record ID: DOR-E14169
Object type: COIN
Broad period: IRON AGE
County: Dorset
Workflow stage: Awaiting validation
A silver stater of the British Iron Age. South Western uninscribed (Durotrigian) type. Reference: ABC 2163 Date: Late Iron Age - c. 60 BC - AD 10 Diameter: 19.12 mm Weight: 4.62 g
Created on: Thursday 15th February 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.

Record ID: DOR-E117FE
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver sceat dating to 600 - 750. Aethiliraed type 105. Runic inscription on the obverse. Quilled crescent on the reverse. Date: Early-Medieval - c. 675 - 750 Diameter:11.56 mm Weight: 0.78 g This coin has also been recorded in the Corpus of Early Medieval Coin Finds (EMC) reference number 2023.0302
Created on: Thursday 15th February 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.

Record ID: DOR-E0B059
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation
An incomplete copper alloy bow brooch.  A knee brooch. The pin shaft is missing. At the head is a open-backed box housing the iron axis bar and spring for the missing pin. The copper alloy spring is present and has three coils either side of the stub of the pin shaft. The end caps of this spring housing box are pierced to accommodate the ends of the axis bar. The wings are short. The head projects horizontally from the centre of the wings (the front of the spring housing). The bow then curves outward an down on a P-shaped profile extending into a short, straight leg. At …
Created on: Thursday 15th February 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.

Record ID: DOR-DED49E
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver sixpence of Philip of Spain and Mary Tudor (1554 - 1558)  dating to 1555 - 1557. Tower mint, London. Lis initial mark. Oval shield on reverse with mark of valu VI above. No date. Reference: North Volume 2, number 1971 Date: Post Medieval Diameter: 27.07 mm Weight: 2.71 g Die axis: 10  
Created on: Thursday 15th February 2024
Last updated: Thursday 15th February 2024
Spatial data recorded.

Record ID: DOR-DE2F34
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. The leg  has an irregular trilobed cross-section. The front a central rounded, longitudinal rib. It has old irregular breaks at both ends.   Date: Medieval to Post Medieval - c.1200-1700 AD. Dimensions: 58.58 mm x 43.73 mm x 11.05 mm Weight: 154 g Crudely made cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking. Butler et al. (2009:4) suggest there were four main types of leg used. This is an example of type A which …
Created on: Thursday 15th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: DOR-DE22A6
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete cast copper-alloy pot leg from a cooking vessel. The leg  has an irregular trilobed cross-section. The front has three rounded, longitudinal ribs which form a three lobed flared foot at the base. It has old irregular breaks at both ends.   Date: Medieval to Post Medieval - c.1200-1700 AD. Dimensions: 66.02 mm x 47.85 mm x 25.26 mm Weight: 246 g Crudely made cast copper-alloy vessels such as cauldrons and skillets were widely used from c.1200-1700 for serving and cooking. Butler et al. (2009:4) suggest there were four…
Created on: Thursday 15th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: DOR-DDF2DE
Object type: SPUR
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A fragment of copper alloy spur. Part of one arm only remains. The arm is D-shaped in cross section and tapers from the break to a broken figure of eight terminal. the terminal projects downwards from the end of the arm and the loper loop id broken. The remaining aperture in the upper loop is circular. Date: Post Medieval - c. 1600 - 1800 Dimensions:  88.06 mm x 13.66 mm x 5.55 mm  Weight: 11.38 g
Created on: Thursday 15th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: DOR-DDDD98
Object type: PIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A fragment of copper alloy probable dress pin. The head only. The head is oval with four vertical spiral grooves. at the top is a small pointed knop. At the base is a collar above the narrowed stub of the pinshaft. Date: Post Medieval - c. 1500 - 1700 Dimensions: 19.62 mm x 8.67 mm Weight: 4.47 g
Created on: Thursday 15th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: DOR-DDA59B
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver penny of Richard II (1377 - 1399),dating to 1377-early 1390s. Type 1 Bent and worn. Mint of York Date: Medieval Diameter. 17.01 mm Weight: 0.86 g  Die axis: 6
Created on: Thursday 15th February 2024
Last updated: Monday 4th March 2024
Spatial data recorded.

Record ID: DOR-DD8EF2
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation
An incomplete probable Roman coin. The reverse has no detail and is scratched. The obverse has a head facing right. Date: Roman Diameter. 27.03 mm Thickness: 2.48 mm Weight: 4.80 g 
Created on: Thursday 15th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.

Record ID: DOR-DCE2D2
Object type: VESSEL
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A sherd of externally glazed earthernware pottery. The fabric is reduced pale grey at the core with orange-red oxidised margins. It is tempered with abundant fine sand and sparse grog. The sherd is quite abraded The sherd has an external cordon and flanking groove around the girth. There is an internal shoulder, probably a lid seat. The exterior is decorated with vertical bands of trailed off-white slip with traces of green glaze over. Probably a sherd from a jug.  Date: Late Medieval - c.1400 - 1500 Weight: 19 g
Created on: Thursday 15th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.

Record ID: DOR-DCDFA7
Object type: MOUNT
Broad period: UNKNOWN
County: Dorset
Workflow stage: Awaiting validation
An incomplete copper alloy hooked fitting. Possibly a dress fastener or a buckle pin. A thick bar of copper alloy with a D-shaped cross-section for much of its length, thinning into a rectangular cross section towards the hooked end. Th hooked end is tapered and bent at a right angle before curling back on itself. At the other end is also tapered and ends in a break. On one face of the bar in the centre are traces of stamped decoration of an annulet with four annulets set around it forming a rectangle. Date:  Dimensions: 54.95 mm x 6.85 mm x 3.62 mm Weight: 7.68 g
Created on: Thursday 15th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.

Record ID: DOR-DCB41B
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A copper alloy sheet metal book clasp of Howsam type A.6.2. A catchplate originally paired with a hooked plate. A flared plate with a scalloped edge along the wider, distal end. At the attachment end are the two hooked arms, one on either side, which housed a bar for the attachment of the missing hook piece. The front of the plate is decorated at the hinged end with a series of incised lines of varying lengths extending longitudinally.. There are two attachment holes set longitudinally along the mid-line which retain separate circular cross-sectioned rivets which ha…
Created on: Thursday 15th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.

Record ID: DOR-DC4829
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A  copper-alloy single looped rectangular buckle frame. The frame only remains, the pin is missing. The buckle frame is rectangular with three, flat, broad sides and the fourth largely taken up with a constriction for the attachment of the missing pin. The frame is flat and rectangular in cross section. The constriction is circular in cross section. The aperture in the centre of the frame is rectangular with rounded ends and a slight expansion to the frame constriction. The front of the frame is decorated along each of the short sides with two grooves flanking a knurled ridge…
Created on: Thursday 15th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.

Record ID: DOR-D22F62
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A  copper-alloy double looped annular buckle frame. The frame only remains, the pin is missing. The buckle frame is asymmetrical, with one D-shaped loop and the other a slightly elongated, less rounded D-shape with two shallow recesses in the outer circumference, giving the outer edge a flared appearance. The bar is central and trapezoidal in cross-section with traces of iron corrosion. Both outer edges are expanded and decorated with transverse grooves. The frame is D-shaped in cross section.  Date: Late Medieval - c.1400 - 1500 Dimensions: 31.75 mm x 28.51 mm x 2.…
Created on: Wednesday 14th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.

Record ID: DOR-D20EF6
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A silver penny of Edward I (1272-1307). Class 9b1. Mint of Bristol. Reference: North Vol 2, No. 1037/1 Date: Medieval Diameter: 18.66 mm Weight: 1.37 g Die axis:  9
Created on: Wednesday 14th February 2024
Last updated: Saturday 6th April 2024
Spatial data recorded.