Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security):001422EDE4401AC3
    • Sort:workflow
    • Broad period:POST MEDIEVAL
    • Page:4
    • Thumbnail:Only records with images please

  • Thumbnail image of SUSS-A122D3

Record ID: SUSS-A122D3
Object type: PATTEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Iron ring for attachment to a wooden patten or sole. The ring is oval with raised terminals for attachment to each side. Both terminal have rectangular strips rising at right angles to the ring and then are bent out at right angles where they expand into attachment plates. One plate is D shaped with two iron rivets through it. The other is oval with one rivet through it and a strip extending from the opposite side of the plate to the ring which ends in an irregular end, probably an old break. The ring is rectangular in section, 93mm by 101.1mm, 8.3mm wide by 6.8mm thick; with the term…
Created on: Wednesday 22nd September 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Brightling', grid reference and parish protected.


  • Thumbnail image of SOM-959A30

Record ID: SOM-959A30
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval silver penny of Elizabeth I (1558-1603), Crescent initial mark, minted at London, AD 1587-1590, North 2017.
Created on: Monday 14th February 2011
Last updated: Friday 1st April 2011
Spatial data recorded. This findspot is known as 'Ditcheat CP', grid reference and parish protected.


  • Thumbnail image of HAMP-EF6265

Record ID: HAMP-EF6265
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged spherical cast copper-alloy post-medieval animal 'crotal' (bell). This complete example has a sub-square suspension loop between two circular sound holes located on the upper hemisphere. The sound holes are recessed on the outer surface and measure c. 5/6mm in diameter. The upper hemisphere is plain. The suspension loop has a angled top and the curve of the bell continues through the opening suggesting it was made using the detachable sprue-piece casting method developed in the 17th century. The loop measures up to 10mm in height by 11.9mm in width by 5.15mm thick. There …
Created on: Friday 8th October 2010
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Thumbnail image of SUSS-474556

Record ID: SUSS-474556
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post medieval cast copper alloy double loop buckle frame. The frame has two oval loops with slightly widened outer edges. The front and back are bevelled and the front is decorated with a raised rim around the inner side of the loops and raised foliate patterns (the pattern is discribed by Whitehead (see below) as vine scroll). There are traces of a black lacquer around the patten. The strap bar is narrowed and recessed. It is very bent and now 45.9mm long, 31.3mm wide, 2.8mm thick and weighs 6.34 grams. Whitehead (2003) illustrates a similar buckle (page 68, No.423) whi…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Patching', grid reference and parish protected.


  • Thumbnail image of SUSS-486225

Record ID: SUSS-486225
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval - Modern cast lead two disc cloth seal. The disks sit one on top of the other and are joined by a tab. One had a hole in the centre and the other a projecting point which has been pushed through the hole and then stamped flat to fix them together. The tab is mostly missing from old breaks. The stamp has the initials R.W. The discs are bent and at most 27.4mm in diameter, 3.7mm thick and it weighs 14.22 grams. The simplcity of the design of initials rather than a privy mark suggests a later date, 17th-18th century (cf Egan p.84, no.234, 236 and p.86, no.242)
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of SUSS-48B4B6

Record ID: SUSS-48B4B6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy sword belt fitting. It is roughly foliate in form, with incised decoration forming a leaf pattern. It has a trefoil shaped terminal at one end below which it narrows before widening to rounded shoulders about a third of the way down from which it tapers to the other end where there are two lugs flanking a forward projecting hook. The hook is oval in cross section and the terminal is lost to an old break. There are two circular fixing holes containing iron corrosion, one near the trefoil terminal and one above the hook. It is 52.6mm long, 22.6mm w…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of DOR-CB9EA6

Record ID: DOR-CB9EA6
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A copper alloy farthing trade token. The token has an off centre circular pierced hole. OBV: IOHN COLE[MAN AT THE EIDER] - A bird REV: OF [BA]SSING STO[KE 1652] - around initials I I [C] Reference: Boyne1858, Hampshire No. 30 Date: Post Medieval - 1652 Diameter: 15.71 mm Weight: 0.91 g
Created on: Wednesday 25th May 2011
Last updated: Monday 18th June 2018
No spatial data available.


  • Thumbnail image of HAMP-CF9E53

Record ID: HAMP-CF9E53
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A worn, clipped and bent 17th-century silver post-medieval penny of Charles I, probably Group D (c. 1634 - c. 1639 AD; probably North 2270)
Created on: Monday 6th June 2011
Last updated: Tuesday 7th June 2011
Spatial data recorded.


  • Thumbnail image of CAM-1E9063

Record ID: CAM-1E9063
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
A lead token of Post-Medieval date. Weight 57.01g (0.1257pounds or 2.0110 ounces), diameter 33.21mm, thickness 7.61mm. The upper surface of the artefact is decorated with a raised symbol, possibly two letters joined together which could be CH or more likely HD. It seems that the symbol was a HD, where the vertical of the 'D' was also the right-hand vertical of the 'H' however it must be noted that the lower part of the letters, if this is what they are, have been worn or scraped away leaving just a faint mark visible today. These tokens were usually locally made with no references a…
Created on: Friday 10th June 2011
Last updated: Wednesday 29th August 2012
Spatial data recorded. This findspot is known as 'Huntingdon District Area', grid reference and parish protected.


  • Thumbnail image of SOM-2C0625

Record ID: SOM-2C0625
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy double-looped oval buckle with an iron pin and separate strap-plate. The loops form one continuous oval outer frame and the outer sides of the loops are slightly widened. The outer edge is rounded and the inner edge and back flat and plain. The integral strap bar is plain. The iron pin is highly corroded but remains in situ. The strap plate is formed of a thin rectangular strip of copper alloy sheet bent in half around the central bar. It has a rectangular slot at the fold for the pin and both sides are borken with irregular breaks. It is 19mm long, 21.1mm i…
Created on: Monday 7th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Cullompton', grid reference and parish protected.


  • Thumbnail image of SUSS-4A9824

Record ID: SUSS-4A9824
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
A corroded Post Medieval copper alloy coin weight of James I (1603-1625 AD) dating from around the second coinage of 1604-19. This weight is for an eighth of a Unite (Halfcrown). The weight has M BRIT IR as a legend to the bust side and a crown with IIS:IX.D below to the reverse.
Created on: Friday 24th June 2011
Last updated: Thursday 27th October 2011
Spatial data recorded.


  • Thumbnail image of HAMP-8F5DD0

Record ID: HAMP-8F5DD0
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A broken and incomplete, corroded copper-alloy finger-ring, probably of post-medieval date. On one side the hoop has broken just below the shoulders. What remains of the hoop on the other sides has been bent outwards. The bezel is broadly oval in plan with a central rectangular recess. The sides of the bezel are bevelled and faceted with two shield shape moulding at the shoulders and two rectangular mouldings at the sides, all the mouldings shallowly concave. The recess is bevelled on all internal sides down to a central sub-square perforation. The setting has been lost. The sides tap…
Created on: Monday 27th June 2011
Last updated: Tuesday 28th June 2011
Spatial data recorded.


  • Thumbnail image of HAMP-7FBA90

Record ID: HAMP-7FBA90
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn, slightly clipped and bent 16th-century silver early post-medieval halfgroat of Henry VIII, Second issue, York mint under Archbishop Thomas Wolsey (1526-1529 AD; North 1805)
Created on: Tuesday 2nd August 2011
Last updated: Thursday 4th August 2011
Spatial data recorded. This findspot is known as 'Otterbourne CP', grid reference and parish protected.


  • Thumbnail image of IOW-1076B8

Record ID: IOW-1076B8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a post-Medieval skillet handle (1679-1717 AD). The fragment is sub-rectangular in plan, flat on the upper face and convex on the underside ('D'-shaped in cross-section). On the upper face there are incised letters: S E with an incised linear groove above and below the letters. This handle has a dark green patina with patches of corrosion. It has an old break at each end and two old dents on the underside. 30.6 x 24.4 x 9.6mm. Weight: 44.25g. The letters: S E are probably part of the name CLEMENT TOSEAR (I and II) of Salisbury who were bell founders and also sand cas…
Created on: Wednesday 14th September 2011
Last updated: Wednesday 6th March 2013
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of HAMP-87DB01

Record ID: HAMP-87DB01
Object type: SPOON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete cast copper-alloy post-medieval spoon consisting of most of the bowl and part of the handle (c. 17th century AD). Little of the handle now survives; the old break reveals a square cross-section. There is a concave depression on the lower surface at the junction of handle and bowl. The bowl was fig shaped but has suffered losses to one side and along the tip. It has a flattened rim all around. It has received numerous strikes that have resulted in the base being pushed upwards near the centre, as well as the losses mentioned and abrasions at the tip. The spoon …
Created on: Tuesday 20th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded.


  • Thumbnail image of SOM-1E4DA7

Record ID: SOM-1E4DA7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy double looped buckle. The frame is broadly rectangular in plan with the outer edges widening in width to pointed projections, forming triangular ends. The strap bar has a lobed knop at either end. Remains of iron corrosion on the strap suggests the pin, now missing, could have been made of iron. It measures 47.3mm in length, 23.7mm in width, 2.1mm in thickness and weighs 3.7g. Whitehead (2003; 82) illustrates a similar example with a wider frame, no. 512, which is dated 1250-1700 AD.
Created on: Tuesday 27th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-1EFC95

Record ID: SOM-1EFC95
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Silver shilling of Charles I, coronet inital mark, 1635-6 AD. North 2225.
Created on: Tuesday 27th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-2ECB42

Record ID: SOM-2ECB42
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of Elizabeth I, ermine initial mark, 1572 AD.
Created on: Wednesday 28th September 2011
Last updated: Friday 14th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-2F7F71

Record ID: SOM-2F7F71
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Silver sixpence of Elizabeth I (1558-1603), uncertain mint and initial mark, 1574-1578 AD.
Created on: Wednesday 28th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-2BDE13

Record ID: SOM-2BDE13
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy token farthing issued by John Hoopper of Nether Stowey, 1652-1670 AD; Williamson (1891:984), Somerset 197.
Created on: Monday 10th October 2011
Last updated: Tuesday 15th November 2011
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 440
Search server index: valhalla

You are viewing records: 61 - 80.

Search statistics

  • Total quantity: 748
  • Mean quantity: 1.700
  • Maximum: 233

Filter your search

61 - 80 of 440 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.