Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: workflow
    • Broad period: POST MEDIEVAL
    • Direction: desc
    • Page: 9

  • Thumbnail image of BH-A73823

Record ID: BH-A73823
Object type: JETTON
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Nuremberg Rose/Orb jetton of 16th century date. The legends on this piece appear to be nonsensical, suggesting it is an annonymous issue struck between c. 1500 and c. 1550 (see Mitchiner 1988: 377). The obverse has three crowns and three lis arranged alternately around a central rose. The initial mark is a crown and the legend reads: ...]G BLIOA[.... The reverse bears the Reichsapfel within a double tressure of three curves and three angles, each point being flanked by a pair of pellets. The reverse legend reads: ...........]MOA[... The jetton meas…
Created on: Tuesday 17th August 2010
Last updated: Tuesday 17th August 2010
Spatial data recorded. This findspot is known as 'Thriplow', grid reference and parish protected.


  • Thumbnail image of HAMP-EAB442

Record ID: HAMP-EAB442
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued by the Winchester grocer William Butler in 1657 AD (Williamson 214). Around a quarter of the flan has been lost due to old breaks in different places at the circumference.
Created on: Friday 20th August 2010
Last updated: Wednesday 28th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.


  • Thumbnail image of HAMP-25E8B3

Record ID: HAMP-25E8B3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy post-medieval shoe or knee buckle. The buckle is rectangular in plan with rounded corners. It is bevelled externally on the upper surface and rabetted at the outer edge. The bevelling is echoed internally on the lower surface. There is a elongated 'C'-shaped moulding on the upper surface along the longer sides and extending into the internal side of the outer edge, terminating in a curl. Central expansions on the longer sides have been drilled to take the separate pin bar. This latter survives in situ; being made of iron it is highly corroded. There a…
Created on: Monday 23rd August 2010
Last updated: Wednesday 12th January 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.


  • Thumbnail image of HAMP-25F3B2

Record ID: HAMP-25F3B2
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy spherical animal ('crotal') bell of post-medieval date (c. 17th century AD). The sub-rectangular suspension loop at the top is 6.9mm in length. The curve of the bell continues under the loop suggesting it was made using the detachable sprue-piece method developed in the 17th century. The upper and lower hemispheres are divided by a prominent horizontal circumferential rib. At either side of the suspension loop, about halfway down the side of the upper hemisphere, is a circular sound hole. Across the lower hemisphere is a rectangular sound slot opening into a circul…
Created on: Monday 23rd August 2010
Last updated: Wednesday 16th November 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-EA5603

Record ID: HAMP-EA5603
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued in Andover for the benefit of the disabled poor in 1666 (Williamson 14)
Created on: Friday 20th August 2010
Last updated: Tuesday 27th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.


  • Thumbnail image of HAMP-260461

Record ID: HAMP-260461
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy cast spherical bell of post-medieval date (c.1500-1650 AD). The bell is spherical and comprises two hemispherical domes with a raised circumferential join. The top hemisphere has two circular sound holes and a square suspension loop with drilled circular hole projecting from the top. The hole was drilled later into the solid cast loop suggesting it was made before the introduction of the detachable 'sprue-piece' method in the mid-17th century. The lower side of this drilled hole has broken or worn through the top of the bell leaving a slot. The lower hemis…
Created on: Monday 23rd August 2010
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-2900A2
Object type: MUSKET BALL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded cast lead-alloy musket ball of post-medieval date. It is generally spherical with slight casting seam and a projecting circular sectioned sprue on one side. Ball shot generally dates from after 1644, and most are late 17th/18th century in date.
Created on: Monday 23rd August 2010
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-2A7BB3

Record ID: HAMP-2A7BB3
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy button inlaid with enamel of late medieval or early post-medieval date (15th-16th century AD). The button has a square head 17.1mm by 16.7mm and 2.5mm thick; it is flat on the front with a recessed cell within a plain border, in the centre of which is a raised circle containing a second cell. The outer cell contains fragments of very glassy red enamel at the cardinal points, and the central cell contains green enamel. From the centre of the flat back projects a rectangular sectioned lug with semi-circular end and a circular hole drilled through it; the back has tra…
Created on: Monday 23rd August 2010
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Thumbnail image of DENO-4E78D2

Record ID: DENO-4E78D2
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy hooked fitting of probable post Medieval date (c.1600-1700). The fitting has a flat oval body with a tapered hook folded under at one end and a broken attachment loop at the other end. The oval plate has ferrous corrosion in the centre of the upper surface and along the base of the underside which probably is probably the remains of an iron rivet. There is no discernible surface decoration. The hook possibly formed part of a sword belt and rough parallels can be found in 'Hooked Clasps & Eyes' by Brian Read, p.222.
Created on: Monday 6th September 2010
Last updated: Wednesday 22nd September 2010
Spatial data recorded. This findspot is known as 'Towton', grid reference and parish protected.


  • Thumbnail image of SOM-388714

Record ID: SOM-388714
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy thimble formed by soldering copper alloy sheet into a long, slightly tapering cylinder with a separate domed top. The top and a part of the side are missing due to an old, very irregular break and the side has split along the seam, it is squashed inwards slightly at the base. The soldered seam is visible around the top and on the side. The sides are decorated with an irregular hand incised grid of lines leaving a strap work pattern, of two lozenges alternating with two pointed ovals, in reserve. There is a plain ring at the base. It is now 18.8mm by 15.3mm a…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Otterhampton', grid reference and parish protected.


  • Thumbnail image of HAMP-37EDB8

Record ID: HAMP-37EDB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded, plain copper-alloy rivet-like object which might have been used to hold repairs to a vessel in place. It is sub-oval in plan with a possibly break giving a broadly straight edge to one side. On the lower surface there is an integral protruding prong towards this edge whose terminal protrudes to one side and is flattened at the base. Rolled sheet rivets replaced the earlier folded sheet rivets in pot repairs from the late 15th - 16th centuries (Egan 2005, 101) suggesting a possible late medieval to post-medieval date for this piece. It is of a red-brown metal with patches o…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Headbourne Worthy CP', grid reference and parish protected.


  • Thumbnail image of BERK-621BE7

Record ID: BERK-621BE7
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp that retains an iron rivet, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.


  • Thumbnail image of BERK-624D97

Record ID: BERK-624D97
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment in the centre of t…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.


  • Thumbnail image of HAMP-CCA317

Record ID: HAMP-CCA317
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, clipped and bent 16th-century silver post-medieval coin: possibly a halfgroat of Elizabeth I struck at London (c. 1583 - c. 1603 AD; possibly North 2016). This coin has suffered some circumferential losses.
Created on: Monday 6th December 2010
Last updated: Tuesday 7th December 2010
Spatial data recorded.


  • Thumbnail image of SUSS-360447

Record ID: SUSS-360447
Object type: STRAP END
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Two copper alloy rings, formed of a double loop of square sectioned wire the ends and middle of which are attached to each other and to the top of a knop. The knop has a circular top to which the wire is attached below which is a constriction then a oval terminal. Both the loops and terminal are complete with no breaks suggesting it was suspended from another obect through the loops. It is 20.1mm long, 16.6mm wide and the wire is 1.2mm thick; it weighs 1.06 grams. It is unclear what this is from. The finder has suggested a parallel with a wire looped terminal on a Medieval …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Winchester', grid reference and parish protected.


  • Thumbnail image of SUSS-3630E5

Record ID: SUSS-3630E5
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A hook piece from a copper alloy Post Medieval (c.1550-1750) book clasp. It is a sub-rectangular piece of copper alloy sheet, with a slightly flared attachment end. At the opposite end is a curved hook (3.6mm wide) the end of which is missing. Below this the main body of the clasp is 9.0mm in width, 9.1mm at the attachment end. At the centre of the attachment end is a perforation through the upper surface for a rivet, now missing. Towards the hook end there is stamped decoration within two fields delineated by transverse zigzag lines. Each field is filled with an 'eye' shaped object: …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of SUSS-A122D3

Record ID: SUSS-A122D3
Object type: PATTEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Iron ring for attachment to a wooden patten or sole. The ring is oval with raised terminals for attachment to each side. Both terminal have rectangular strips rising at right angles to the ring and then are bent out at right angles where they expand into attachment plates. One plate is D shaped with two iron rivets through it. The other is oval with one rivet through it and a strip extending from the opposite side of the plate to the ring which ends in an irregular end, probably an old break. The ring is rectangular in section, 93mm by 101.1mm, 8.3mm wide by 6.8mm thick; with the term…
Created on: Wednesday 22nd September 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Brightling', grid reference and parish protected.


  • Image not taken

Record ID: SUSS-9F9103
Object type: BELL
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Three cast copper alloy spherical rumbler bells (crotals) of Post Medieval date (1600-1800 AD). The bells are all similar although one is damaged. They are spherical and compris two hemispherical domes with raised circumferential joins. The upper hemispheres are plain with two circular sound holes and a sub-square suspension loop projecting from the top. The curve of the bell continues under the loop apertures suggesting they were made using a detachable 'sprue-piece', this method was introduced in the 17th century. The lower hemispheres have a long sound slit with circular hol…
Created on: Monday 4th October 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Etchingham', grid reference and parish protected.


  • Image not taken

Record ID: SUSS-FA7B55
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post mediveal, copper alloy, farthing of Charles II (1660 - 1685), date is illegible, 1672-1679 AD. Pierced with a square hole just off centre.
Created on: Wednesday 9th June 2010
Last updated: Wednesday 9th June 2010
Spatial data recorded. This findspot is known as 'Chichester Area', grid reference and parish protected.


  • Thumbnail image of SUSS-25F306

Record ID: SUSS-25F306
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast lead-alloy uni-face circular token, 1500-1850 AD. The token has the raised initials TP on one side. The reverse appears to have a raised pellet towards one edge but this could possibly be a casting flaw. The token measures 18.2 mm in diameter, 1.9 mm thick, and weighs 3.84 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date.
Created on: Friday 11th June 2010
Last updated: Saturday 12th June 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 346
Search server index: asgard

You are viewing records: 161 - 180.

Search statistics

  • Total quantity: 647
  • Mean quantity: 1.870
  • Maximum: 233

Filter your search

161 - 180 of 346 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.