Record ID: SOM-141A7D
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A cast copper-alloy post-medieval dress fastener with a large circular central plate. This is the eye section of a hook and eye fastener, with a rectangular loop for the eye extended to one side of the plate. The circular plate is slightly convex and moulded in low relief on the front with a central six-petalled flower and a narrow border at the edge. Around the flower are four mouldings in the form of pairs of curled lines that start on the outer border of the circle and curve away form each other as they go towards the centre. There are holes between the pairs, curls and edge and cu…
Created on: Tuesday 24th March 2015
Last updated: Tuesday 11th December 2018
Spatial data recorded. This findspot is known as 'Silverton', grid reference and parish protected.

Record ID: SOM-F86ED2
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
One part of a Post medieval cast copper alloy two-part blunt hook and eye fastener. The fastener has a circular plate, slightly concave on the back and convex on the front. The front is moulded into a design of a man in doublet and collared shirt with a beard and large, slightly wild hair in locks, all within a beaded border. There are three circular attachment loops projecting from the edge at regular intervals, one (at 7 o'clock) is complete, one (at 11 o'clock) broken and one (at 3 o'clock) almost completely missing where about a fifth of the edge of the plate has been lost. The br…
Created on: Wednesday 7th December 2011
Last updated: Wednesday 1st November 2017
Spatial data recorded. This findspot is known as 'Bawdrip', grid reference and parish protected.

Record ID: SOM-A7C805
Object type: CUTLERY
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Incomplete post medieval copper alloy pastry jigger consiting of part of the central shaft and the cross bar forming the head. The shaft is is circular in cross-section at the apex and sub-triangular in cross-section where it joins the head. It swells gradually away from the head, reaching its maximum diameter at a point just below the apex. The head is flat. The upper edge of the head curves upwards, then downwards to either side of the shaft, creating a symmetrical, wavy effect. The extant working end consists of a 'T'-shaped head that would have been used for cutting and impressing…
Created on: Wednesday 12th May 2010
Last updated: Wednesday 7th September 2016
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.

Record ID: LANCUM-D55A16
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
Cast cu-alloy coin weight for an ecu au soleil (French gold denomination). It depicts a radient sun in the centre of the shield on the obverse and was issued between c. AD1475-1654. Withers suggest this form is an English type (1994, 39).
Created on: Thursday 17th February 2011
Last updated: Monday 10th April 2017
Spatial data recorded. This findspot is known as 'Mawdesley', grid reference and parish protected.

Record ID: DENO-30C120
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post Medieval Coin Weight: Complete cast copper alloy coin weight. The weight is a square flat disc decorated on both sides. One side carries the design of a crowned rose with the letters EC to either side. the other side probably shows a scallop shell with the letters GG above. This coin weight was continentally produced for the English market. GG is the mark of Gerrit Greers of Amsterdam. The weight weights1ozt. This coin weight is dated to c.1600-1630.
Created on: Wednesday 30th March 2011
Last updated: Thursday 27th September 2012
Spatial data recorded. This findspot is known as 'Gunthorpe', grid reference and parish protected.

Record ID: SUSS-D20B62
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. On the obverse is a three quarter lengh portrait of James I with the legend: I R BRI all encircled by a pellet border. On the reverse is XIs (for 11 shillings) under a crown within a plain line circular border, over stamped with a crowned I to upper left. This is a British made weight for revalued Double Crown (half unite) of James I, 2nd coinage (Withers and Withers 1995:13). It is 14.52mm square by 3.35mm thick; it weighs 4.5 grams, 70 grains. A full weight double crown of the period 1604-1619 weighed 77.5 grains…
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-AE77C5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. It is very worn but on the obverse appears to be a crown above ER enclosed within a circle. On the reverse side, which is also very worn, is an angel spearing a dragon lying at their feet. This image is enclosed within a pellet circle. This is a British made weight issued early in the reign of James I for an Angel of Elizabeth I (1558-1603). (Withers and Withers 1995: 22-3, 37 ). It is 14.2mm square by 2.9mm thick; it weighs 3.79 grams (58.5 grains). This is lighter than the weight of an Angel coin given in Withers and W…
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.

Record ID: SUSS-4A9824
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A corroded Post Medieval copper alloy coin weight of James I (1603-1625 AD) dating from around the second coinage of 1604-19. This weight is for an eighth of a Unite (Halfcrown). The weight has M BRIT IR as a legend to the bust side and a crown with IIS:IX.D below to the reverse.
Created on: Friday 24th June 2011
Last updated: Thursday 27th October 2011
Spatial data recorded.

Record ID: HAMP-3A0480
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn and corroded possible copper-alloy coin weight of medieval or post-medieval date. It is circular and seemingly decorated unifacially, although both surfaces are highly corroded. The upper face appears to depicts a ship. It has a rounded circumference. The design and size of this coin weight are consistent with it relating to a noble, if anything. Withers & Withers (1995, 18-19) illustrate these 15th- and 16th-century coin weights.
Created on: Tuesday 21st February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded.

Record ID: SOM-CFF786
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A Post Medieval copper alloy coin weight of James I (AD1603-1625). The weight is flat and square in shape. The obverse has a bust facing right with the letters I R to left, inscription to right ilegible, all within a circle of pellets. The reverse shows a crown above the numerals XI for 11 shillings. The weight measures 14.98mm x 14.72mm is 3.17mm in thickness and weighs 4.34g, 66.8grains. Withers (2011:26) catalogues this type and suggests they are mainly British, he suggests (p.68-9) 11s would be for an Angel (71 grains in 1604-1619) or double crown (70.25grains in 1619 to 1657).…
Created on: Tuesday 26th November 2019
Last updated: Thursday 5th December 2019
Spatial data recorded. This findspot is known as 'Spaxton CP', grid reference and parish protected.

Record ID: SOM-6F4604
Object type: COIN HOARD
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A coin hoard of four copper alloy cartwheel pennies of George III, Birmingham mint second issue, dated 1797 (Spink p.417 no.3777). Probably a chance purse loss. One penny has been deliberately bent in two places and drilled through. As this modified coin was found in a group with other pennies, suggested to be a purse loss, it can be inferred that, despite the modification, the coin would still have been an accepted item of tender. All Diameter 35.5mm; die axis 6; total weight 99g. 1. Cartwheel penny Obverse: Bust. Inscription: GEORGIUS III D G REX Reverse: Britannia se…
Created on: Monday 30th April 2018
Last updated: Thursday 3rd May 2018
Spatial data recorded.

• 

  Image not taken

Record ID: SUSS-FA7B55
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post mediveal, copper alloy, farthing of Charles II (1660 - 1685), date is illegible, 1672-1679 AD. Pierced with a square hole just off centre.
Created on: Wednesday 9th June 2010
Last updated: Wednesday 9th June 2010
Spatial data recorded. This findspot is known as 'Chichester Area', grid reference and parish protected.

• 

  Image not taken

Record ID: SUSS-1B0E41
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post medieval copper alloy farthing of Charles I (1625-1649), Rose Farthing Type 2, initial mark unclear, 1636-1644 AD, North 2291.
Created on: Monday 5th July 2010
Last updated: Monday 5th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

Record ID: SOM-3029D3
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy farthing of Charles I (1625-1649). Richmond round type 1, illegible initial mark, 1625-1634. North 2277.
Created on: Monday 10th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.

Record ID: IOW-7CEE30
Object type: COIN
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A fragment of a copper-alloy coin, probable a Spanish re-validated maravedis. Often called "cob" coins, these were crudely made in Spain initially, and later in the Americas for use in the Spanish colonies. The coinage was re-valued and consequently these are often countermarked.
Created on: Monday 10th May 2010
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

• 

  Image not taken

Record ID: HAMP-81F423
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn and corroded 17th-century copper-alloy post-medieval rose farthing of Charles I (1625-1649 AD)
Created on: Wednesday 27th October 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded.

Record ID: LVPL-E25108
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy dinero of the Principality of Cataluna, of mid-C17th date. Obverse: V[ILL]A : 16[42]; head right. Reverse: [...]NA; long cross dividing legend, three pellets in two quarters, large annulet in two quarters. Possible mint of Oliana. cf. Calico et al. 1982, 174; Type 77/Number 153.
Created on: Tuesday 22nd July 2014
Last updated: Tuesday 22nd July 2014
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.

Record ID: SUSS-E22D75
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Copper alloy farthing of James I, Type 3d (Lennox round), initial mark possibly a tun, 1614-1625 AD, North 2136. Reverse struck off centre.
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SUSS-E2BF63
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Copper alloy farthing of Charles II, 1672 AD
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SUSS-0D7B32
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Copper alloy farthing of William III (1694-1702), 1696 issue.
Created on: Friday 18th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.