Record ID: SOM-EDFA7C
Object type: BEAD
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A translucent yellow glass bead, probably dating to the Post Medieval period. The bead is spherical with a central piercing and a band of opaque white around the cnetre, caused by a change in colour in the glass trail rather than an applied band. It measures 9.30mm in diameter and weighs 1.20g. The glass appears to have been wound in a rail to form the bead. Glass beads are difficult to date with any certainty but the size, shape and colour would suggest that it is probably of Post Medieval date.
Created on: Tuesday 23rd April 2019
Last updated: Tuesday 14th May 2019
Spatial data recorded. This findspot is known as 'Bratton Seymour', grid reference and parish protected.

Record ID: SOM-1DE6A8
Object type: BELL
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete cast copper-alloy spherical animal bell (crotal) of post-medieval date. The bell comprises two hemispherical domes with a raised circumferential join. The upper hemisphere has two sub-circular sound holes with a rectangular loop projecting from the top between them. The loop is formed of an angular U-shaped bar of square cross-section and is 9.8 mm high, 11.3 wiide and 4.2mm thick. The curve of the bell continues under the loop aperture suggesting it was made using a detachable 'sprue-piece'; this method was introduced in the 17th century. The lower hemisphere has a long, w…
Created on: Monday 18th August 2014
Last updated: Thursday 21st August 2014
Spatial data recorded. This findspot is known as 'Mere CP', grid reference and parish protected.

Record ID: SOM-39F451
Object type: BELL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A post-medieval cast copper alloy crotal bell complete with iron suspension ring and hook. The bell is divided into two hemispheres by a prominent ridge which runs around the centre of the bell. The upper hemisphere is undecorated with two large sound holes. A semi-circular loop extends up from the top of the upper hemisphere.The curve of the bell continues under the loop aperture suggesting it was made using a detachable 'sprue-piece', this method was introduced in the 17th century. A rusty iron ring goes through the loop (the ring has abutting ends), an integral hook continues from …
Created on: Monday 13th July 2015
Last updated: Thursday 13th October 2016
Spatial data recorded.

Record ID: SOM-8E14A3
Object type: BELL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Three fragments of a Post Medieval copper alloy cast spherical (crotal) bell dating to c1600 - 1850. The bell would have comprised two hemispherical domes with a raised circumferential join. The upper hemisphere would have had two circular sound holes with a rectangular suspension loop projecting from the top between them. The lower hemisphere would have had a long, wide sound slit with circular sound holes at either end. The two smaller pieces come from the upper hemisphere and the larger piece comprises a small section of the upper hemisphere from the edge of one of the sound hol…
Created on: Thursday 5th December 2019
Last updated: Friday 6th December 2019
Spatial data recorded. This findspot is known as 'Enmore', grid reference and parish protected.

Record ID: SOM-64B141
Object type: BELL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Complete cast copper alloy spherical rumbler bell (crotal) of Post Medieval date. The bell comprises two hemispherical domes with a raised circumferential join. The upper hemisphere has two circular sound holes with a rectangular tab projecting from the top between them. The tab has file marks from tidying and has been drilled with a circular hole to make a suspension loop. The lower hemisphere has a long, wide sound slit with circular holes at the ends. Part of the lower hemisphere, to one side of the slit, is missing to an old break. Both hemispheres are decorated with the typical p…
Created on: Friday 16th November 2012
Last updated: Tuesday 12th January 2016
Spatial data recorded.

Record ID: SOM-A861F6
Object type: BRIDLE BIT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy bridle boss, with a mass of iron corrosion on the back. The fitting is broadly circular in plan with a raised openwork central dome and a flat outer border. The outer edge of the border has seven circular projecting knops evenly spaced around the edge with smaller projecting knop evenly spaced between. The knops are linked with moulded scroll decoration. The central dome is formed of eight regularly spaced rectangular strips radiating from a central raised knop, expanding slightly in width before connecting to the flat outer border. The iron corrosion appear…
Created on: Saturday 21st January 2012
Last updated: Wednesday 5th October 2016
Spatial data recorded. This findspot is known as 'Bishops Hull', grid reference and parish protected.

Record ID: SOM-400FE3
Object type: BRIDLE FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval, 17th century, cast copper-alloy circular bridle boss. The boss is a hollow hemisphere, with an openwork design and a flat border around the edge. A break to one side has removed part of the border and one of the pair of rivet holes. The boss has a raised central knop, around which is the openwork main body, consisting of slim curving arms. The less worn arms are decorated with a scale like patten of raised semi-circles running down each arm and incised lines down their inner sides which continue at the base to meet the base of the next arm. Around this is a narrow rop…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.

Record ID: SOM-2C0625
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
Post Medieval copper alloy double-looped oval buckle with an iron pin and separate strap-plate. The loops form one continuous oval outer frame and the outer sides of the loops are slightly widened. The outer edge is rounded and the inner edge and back flat and plain. The integral strap bar is plain. The iron pin is highly corroded but remains in situ. The strap plate is formed of a thin rectangular strip of copper alloy sheet bent in half around the central bar. It has a rectangular slot at the fold for the pin and both sides are borken with irregular breaks. It is 19mm long, 21.1mm i…
Created on: Monday 7th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Cullompton', grid reference and parish protected.

Record ID: SOM-1E4DA7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy double looped buckle. The frame is broadly rectangular in plan with the outer edges widening in width to pointed projections, forming triangular ends. The strap bar has a lobed knop at either end. Remains of iron corrosion on the strap suggests the pin, now missing, could have been made of iron. It measures 47.3mm in length, 23.7mm in width, 2.1mm in thickness and weighs 3.7g. Whitehead (2003; 82) illustrates a similar example with a wider frame, no. 512, which is dated 1250-1700 AD.
Created on: Tuesday 27th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-CAA8E2
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval cast, copper alloy double-looped buckle. The pin survives in part and is a copper alloy strip bent around the strap bar, broken towards the tip which is now lost. The loops of the frame are sub oval and the strap bar is recessed. It measures 35.8mm in length, 25.9mm in width and 3.4mm in thickness. It weighs 6.7g. Whitehead (2003; 305), number 305, is a similar example, dated 1500-1650 AD.
Created on: Wednesday 5th October 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-CAD002
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Incomplete Post Medieval cast, copper alloy trapezoidal buckle. The frame widens from the strap bar forming a trapezoidal shape. There are rounded knops on the corners and the middle of the outer edge widens into a The buckle is broken to one side of the strap bar so that only one of the original two loops survives. The outer edge has rounded knops with a rounded triangular projection between. The strap bar has a lobed knop at either end. It measures 24.4mm in length, 21.1mm in width and 2.1mm in thickness. Whitehead (2003; 84), number 523, is a similar, more complete example, dat…
Created on: Wednesday 5th October 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-CB5157
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval cast, copper alloy oval buckle with surviving chape and pin. The frame is drilled and the strap bar is separate, although survives in situ on this example. The buckle frame has moulded decoration; raised vertical lines crossed with diagonal lines either end of the strap bar with scroll work to the sides. The chape is 'D-shaped' with the centre of the curve projecting into an elongated knop which has a raised stud at the end. It is a Whitehead (2003; 96) type I. The reverse of the chape has 'IOHN BRADNOCK' stamped. The pin is triangular in shape. The buckle measures 47.7m…
Created on: Wednesday 5th October 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-CBD762
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval cast, copper ally double-looped buckle. The frame is a pointed oval in plan with open work detail. The frame widens on the outer edge to form the pointed oval. Within the centre of the widest point of the frame is an openwork lozenge. The strap bar is recessed and there is a probable openwork drop shape at either end although it is difficult to tell due to the amount of dirt remaining on this example. The frame is indented to either side of the strap bar at both the top and bottom. The pin is missing. It measures 42.7mm in length, 25.7mm in width, 2.3mm in thickness and …
Created on: Wednesday 5th October 2011
Last updated: Friday 7th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-320408
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval or post-medieval cast copper-alloy double-loop buckle frame. The frame has two oval loops which are D-shaped in section with flat backs and slightly widened outer edges. The strap bar is narrowed. The pin is missing but there are traces of iron corrosion on the strap bar and one loop. The frame is 23.0mm long, 18.8mm wide and 2.5mm thick, it weighs 1.74 grams. A similar example is illustrated in Margeson (1993:30, no.164) from a 17th century context , although with an incised line for a pin rest in the centre of each loop, it is likely similar simple forms were in use …
Created on: Wednesday 13th May 2015
Last updated: Thursday 28th May 2015
Spatial data recorded. This findspot is known as 'Carhampton', grid reference and parish protected.

Record ID: SOM-8F6E99
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete copper-alloy post-medieval double-looped buckle frame, missing most of one of its loops as well as its pin. The strao bar extends beyond the meeting point of the loops ending in rounded lobes. The reverse surface ia flat, and the upper surface is convex. At the centre of the remaining loop is a lobes expansion with the front moulded into crude flower. The broken off loop is a short stub along one edge (6mm), and broken at the moulding along the other. The breaks are old and the frame is bent slightly. The remaining section is 28.4mm long, 28.9mm wide and 2.7mm thick…
Created on: Thursday 23rd April 2015
Last updated: Thursday 30th April 2015
Spatial data recorded. This findspot is known as 'Stawell', grid reference and parish protected.

Record ID: SOM-AA45B0
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
An incomplete post-medieval cast copper-alloy double-looped buckle frame. Around a half of one of the buckle's loops has been broken away following old damage, with the outer edge gone completely and the sides surviving to differing extents above and below. The pin is also missing. The remaining oval loop is curved in cross-section due to a central recess between the sides of the buckle on the back. This is presumably a result of casting in an open, one-piece mould, whereby the metal has cooled and contracted. At the centre of the outer edge of the complete loop is an angled lobed kn…
Created on: Wednesday 25th June 2014
Last updated: Monday 30th June 2014
Spatial data recorded. This findspot is known as 'Halberton CP', grid reference and parish protected.

Record ID: SOM-023C97
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval cast copper-alloy double-loop buckle frame with rectangular loops. The loops are rectangular in cross section. It has flat, trefoil projections at the corners and bilobed knops in the centre of the outer edges of the loops and at the ends of the strap bars. The knops in the cnetre of the loops have an incised transverse line across the front to act as a pin rest. One corner is now bent up 45 degrees in profile. The pin is missing. It is 34.8mm long, 30.0mm wide and 1.9mm thick; it weighs 4.89 grams. Whitehead (2003: 79) illustrates a very similar frame, no.488, which …
Created on: Wednesday 25th January 2012
Last updated: Wednesday 25th January 2012
Spatial data recorded. This findspot is known as 'near Wells', grid reference and parish protected.

Record ID: SOM-53AE77
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A small, complete Medieval to Post Medieval copper alloy double loop oval buckle dating to c. 1350 to 1650. The loops are oval with slightly expanded outer edges. The frame is D-shaped in cross section. The frame has bevelled inside and outside edges and there is a pin rest at each side of the frame. The pin bar is narrowed from the frame and recessed and the pin is hooked around it. The in is oval in cross section and tapers to a point. The piece has a green patina. It measures 18.40mm in length, 13.97mm in width, 1.97mm in thickness and weighs 1.29g. This style of buckle is qui…
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-E41828
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Part of a Post Medieval copper alloy double loop oval buckle dating from c AD1500-1650. One loop is missing at an old, worn break. The central strap bar is narrowed with a small moulded knop at either end. The pin is missing. The front of the frame has bevelled edges and the back is flat and undecorated. The piece has a brown patina. It measures 25.9mm in length,1 9.3mm in width, 2.5mm in thickness and weighs 2.94g. Whitehead (2003:52) states that this type of double loop buckle is extremely common and has been found in dated contexts from the mid 14th to the late 17th century. H…
Created on: Tuesday 3rd March 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-F7336C
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A Medieval to Post Medieval copper alloy double loop oval buckle dating to the period c AD1350 - 1700. The frame has a bevelled inside edge and three transverse engraved lines on each loop. The pin is missing. The central bar is narrowed and has a break towards one end. There is a small knop at either end of the bar. There are traces of black lacquer on both surfaces. The buckle measures 37.40mm in length, 33.17mm in width, 3.48mm in thickness and weighs 8.83g. A similar example is illustrated in Margeson (1993:30, no.171) from a 17th century context , although with only one incise…
Created on: Tuesday 11th June 2019
Last updated: Thursday 27th June 2019
Spatial data recorded. This findspot is known as 'Piddletrenthide CP', grid reference and parish protected.