Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: objectType
    • Broad period: POST MEDIEVAL
    • County: Hampshire
    • Show this many records per page: 40

  • Thumbnail image of HAMP-37EDB8

Record ID: HAMP-37EDB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded, plain copper-alloy rivet-like object which might have been used to hold repairs to a vessel in place. It is sub-oval in plan with a possibly break giving a broadly straight edge to one side. On the lower surface there is an integral protruding prong towards this edge whose terminal protrudes to one side and is flattened at the base. Rolled sheet rivets replaced the earlier folded sheet rivets in pot repairs from the late 15th - 16th centuries (Egan 2005, 101) suggesting a possible late medieval to post-medieval date for this piece. It is of a red-brown metal with patches o…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Headbourne Worthy CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-F2CC91
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast lead pot mend, used to mend a broken vessel in order to lengthen the period of use after damage had occurred. It is sub-circular and slightly curved in profile, with the section above the slot slightly misaligned to that below. The vessel is also curved and c. 3.5mm thick. Its dark orange-brown colour suggests that this is a corroded iron cooking vessel, of early post-medieval date.
Created on: Friday 8th April 2011
Last updated: Tuesday 12th April 2011
Spatial data recorded. This findspot is known as 'Bishops Waltham CP', grid reference and parish protected.


  • Thumbnail image of HAMP-673B93

Record ID: HAMP-673B93
Object type: TOY
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly corroded and bent post-medieval lead-alloy toy watch. The object is circular and bifacially moulded in low relief. Within a wide border is a symmetrical design of four lozenges between stylised flowerheads and ring-and-dot motifs. The sides of the lozenges are concave. The inner part of the border design touches the chapter ring which is marked with the Roman hours I-XII with pellet half-hour marks. The plain dial centre is enclosed within another pellet border. The single hand with counterpoise and arrowhead pointer is at 12 o'clock. The design is repeated on the other sur…
Created on: Monday 12th December 2011
Last updated: Tuesday 13th December 2011
Spatial data recorded. This findspot is known as 'Ringwood CP', grid reference and parish protected.


  • Thumbnail image of HAMP-F51624

Record ID: HAMP-F51624
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly bent and highly corroded copper-alloy post-medieval trader's token farthing, issued by Romsey grocer Isaac Knight in 1664 AD (Williamson 174). This token has suffered a loss to its circumference.
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-7BB753

Record ID: HAMP-7BB753
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn and corroded, slightly bent possible 17th-century copper-alloy post-medieval token farthing of uncertain issuer (c. 1648 - c. 1672 AD)
Created on: Wednesday 25th April 2012
Last updated: Wednesday 25th April 2012
Spatial data recorded.


  • Thumbnail image of SUR-D13AD4

Record ID: SUR-D13AD4
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A trader's token issued by William Joyce of Salisbury WILLIAM IOYCE/ A camel couchant IN SARVM 1652/ W I
Created on: Wednesday 26th May 2010
Last updated: Wednesday 26th May 2010
Spatial data recorded.


  • Thumbnail image of SUR-7D20E6

Record ID: SUR-7D20E6
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A halfpenny trader's token issued by William Taylor of Winchester.
Created on: Tuesday 15th December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-EAB442

Record ID: HAMP-EAB442
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued by the Winchester grocer William Butler in 1657 AD (Williamson 214). Around a quarter of the flan has been lost due to old breaks in different places at the circumference.
Created on: Friday 20th August 2010
Last updated: Wednesday 28th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.


  • Thumbnail image of HAMP-EA5603

Record ID: HAMP-EA5603
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued in Andover for the benefit of the disabled poor in 1666 (Williamson 14)
Created on: Friday 20th August 2010
Last updated: Tuesday 27th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.


  • Thumbnail image of HAMP-6F86D3

Record ID: HAMP-6F86D3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval/post-medieval cast lead token decorated unifacially in relief. It has been bent following old damage. It depicts a voided long cross with central pellet and large voided 'O' set at forty-five degrees in each angle.
Created on: Friday 5th July 2013
Last updated: Friday 12th July 2013
Spatial data recorded. This findspot is known as 'Chilcomb CP', grid reference and parish protected.


  • Thumbnail image of HAMP-2BEC46

Record ID: HAMP-2BEC46
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded fragment from a cast copper-alloy hooked mount of post-medieval date. The fragment consists of the lower part of the mount, including the hook and the lower part below a rivet hole. Within this lower rivet hole corroded remains of an iron rivet. The sides of the mount are scalloped with rounded protrusions to the sides. The inward-turning hook has been bent slightly to one side as a result of old damage. The metal has corroded to a red-brown colour with larges areas of light-green and off-white corrosion product.
Created on: Monday 21st February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.


  • Thumbnail image of HAMP-DC6101

Record ID: HAMP-DC6101
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval copper-alloy hooked mount. The central portion of the mount is sub-oval in plan and domed, with a hollow underside. It tapers towards the hook and is faceted with a flattened top and bevelled sides.  Extending upwards from the top is rounded lobe which has a central rivet hole (with an iron rivet still in situ), a transverse ridge at its base and a long, rounded projection at the top. At the base of the mount is a transverse groove above a backward-facing hook. There is a further, this time copper-alloy and integral, rivet and a rove just above the groove which would …
Created on: Thursday 8th April 2010
Last updated: Thursday 8th April 2010
Spatial data recorded.


  • Thumbnail image of HAMP-5FC754

Record ID: HAMP-5FC754
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and incomplete cast copper-alloy hooked mount of post-medieval date. The mount is sub-trapezoidal in plan with a cusped upper edge. It tapers towards the hook (now missing), widening slightly just above the hook; the mount has broken as the hook begins. The mount is broadly flat with slight bevelling on its upper surface. It features two iron rivets, one towards the upper edge, the other just below the centre of the plate. Much of the upper rivet survives corroded in place. The copper alloy is covered in an off-white corrosion product over a mid-green metal. Comparable hook…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.


  • Thumbnail image of SUSS-360447

Record ID: SUSS-360447
Object type: STRAP END
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Two copper alloy rings, formed of a double loop of square sectioned wire the ends and middle of which are attached to each other and to the top of a knop. The knop has a circular top to which the wire is attached below which is a constriction then a oval terminal. Both the loops and terminal are complete with no breaks suggesting it was suspended from another obect through the loops. It is 20.1mm long, 16.6mm wide and the wire is 1.2mm thick; it weighs 1.06 grams. It is unclear what this is from. The finder has suggested a parallel with a wire looped terminal on a Medieval …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Winchester', grid reference and parish protected.


  • Thumbnail image of HAMP-87DB01

Record ID: HAMP-87DB01
Object type: SPOON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A damaged and incomplete cast copper-alloy post-medieval spoon consisting of most of the bowl and part of the handle (c. 17th century AD). Little of the handle now survives; the old break reveals a square cross-section. There is a concave depression on the lower surface at the junction of handle and bowl. The bowl was fig shaped but has suffered losses to one side and along the tip. It has a flattened rim all around. It has received numerous strikes that have resulted in the base being pushed upwards near the centre, as well as the losses mentioned and abrasions at the tip. The spoon …
Created on: Tuesday 20th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded.


  • Image not taken

Record ID: HAMP-815D50
Object type: SHOT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded small lead-alloy ball with attached sprue: shot of post-medieval date. The sprue extends for 2.9mm at a diameter of 5.7mm before expanding to 6.6mm at the point of break. The sphere is small enough to be pistol shot.
Created on: Tuesday 1st February 2011
Last updated: Tuesday 1st February 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-2900A2
Object type: MUSKET BALL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded cast lead-alloy musket ball of post-medieval date. It is generally spherical with slight casting seam and a projecting circular sectioned sprue on one side. Ball shot generally dates from after 1644, and most are late 17th/18th century in date.
Created on: Monday 23rd August 2010
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-D002C5

Record ID: HAMP-D002C5
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and incomplete sub-rectangular cast copper-alloy mount of post-medieval date. The object is flat with a main rectangular body which incurves at one end to a width of 4.4mm before an old break; it appears to be truncated at the other end due to old damage. Before the end narrows there is a pair of double transverse grooves on the upper surface between which possible decoration within a rectangular field now obscured by corrosion. The main body beyond has grooves running just inside the long edges. The field within appears plain, again perhaps a product of corrosion, apar…
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Broughton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-6E7D16

Record ID: HAMP-6E7D16
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy sheet binding, sub-circular in plan, of probable post-medieval date. The piece has suffered a longitudinal crack but it has only been slightly distorted in plan. The thin strip is flat at one end and cusped on the other other giving it the superficial appearance of a crown. The cusping is formed of triangles each with small semicircular cusps. An upper zone from just below the cusps is delineated by a double longitudinally incised line; the area below is plain, as is the internal surface. The upper zone is decorated with punched curvilinear decoration. Above the longitu…
Created on: Thursday 13th October 2011
Last updated: Thursday 13th October 2011
Spatial data recorded. This findspot is known as 'Abbotts Ann CP', grid reference and parish protected.


  • Thumbnail image of PUBLIC-750008

Record ID: PUBLIC-750008
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy mount. It has a central D shaped section with incised radiating lines creating a scallop shell appearance. There are large lobed knops projecting from the opposite ends (one in the centre of the straight edge of the D one in the centre of the curve). The one projecting from the straight edge starts with a narrow projecting bar which expands into a terminal in the form of a square flanked by triangles. The opposite projection has a large oval knop topped by a smaller more pointed oval knop with a horizontal incised line across the middle of it, possibly…
Created on: Saturday 3rd April 2010
Last updated: Monday 7th June 2010
Spatial data recorded.


  • Thumbnail image of HAMP-4E0C41

Record ID: HAMP-4E0C41
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy mount in the form of a Tudor rose of post-medieval date (16/17th century AD). This small mount is essentially flat and in the form of a double five-petalled rose with small pointed lobes in the cusps. The centre of the upper surface is moulded in low relief with five arms emerging from a central point to join the side of the internal rose. Between each arm a small spur springs from the side of the internal rose; thus five heart shaped cells are created. In one of these white enamel survives in place. In an adjacent cell formed between the roses is red enamel, and w…
Created on: Sunday 8th December 2013
Last updated: Monday 9th December 2013
Spatial data recorded.


  • Thumbnail image of HAMP-83BBB0

Record ID: HAMP-83BBB0
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A small copper-alloy post-medieval mount in the form of a fleur-de-lis. The central fleur is pointed, while the lateral ones are lobes set at right angles to it. They are delineated by V-shaped grooves between them on the upper surface. A large expanding lobe emerges from the base of the lis and is rounded at its end. The sides of the mount are bevelled subtly on the upper surface; the lower surface is flat. Emerging from the reverse of the central fleur is a truncated integral prong of rectangular cross-section, now vestigial. This is the only obvious means of attachment. Post…
Created on: Wednesday 11th December 2013
Last updated: Wednesday 11th December 2013
Spatial data recorded.


  • Image not taken

Record ID: HAMP-850B60
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy mount of post-medieval date (c.AD 1600-1750), plausibly a harness fitting. The mount has a heart-shaped plate that is very shallowly convex at the front and concave at the rear. At the narrow end there is an integral fleur-de-lis-shaped protrusion, bent down slightly at the tip. The central element of this feature is pointed and the two side fleurs are small and rounded, set at right angles to it. There is a V-shaped groove on the upper surface of the mount about halfway along which gives more definition to the heart shape. Below this, and above the lis terminal, …
Created on: Wednesday 11th December 2013
Last updated: Wednesday 11th December 2013
Spatial data recorded.


  • Thumbnail image of HAMP-0CFD22

Record ID: HAMP-0CFD22
Object type: JETTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A worn and corroded 16th-century copper-alloy post-medieval anonymous Nuremberg jetton of the 'Rose / orb' type with fictitious legend. About 10% of the circumference has been cut straight and there is a small crack to one side of the cut. Similar examples with a wide range of fictitious legends can be found illustrated in Mitchiner (1988, 382-383) where they are dated to the first half of the 16th century.
Created on: Tuesday 22nd December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-96BEA2

Record ID: HAMP-96BEA2
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A post-medieval/modern gunflint from a flintlock musket. The flint is broadly rectangular in plan. The ventral surface is smooth and relatively flat; the strikes come in at an angle; the bulb of percussion is absent. The dorsal face is bevelled on all sides, more shallowly towards the distal end where the bevelled area widens, and very haphazardly at the proximal end due to frost fracturing. There is some retouching to the distal end. The flint is a mid- to light-grey/brown colour. The relative crudeness of this gunflint suggests that it may have been a replacement generated in the field.
Created on: Tuesday 8th November 2011
Last updated: Wednesday 9th November 2011
Spatial data recorded.


  • Thumbnail image of HAMP-8F5DD0

Record ID: HAMP-8F5DD0
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A broken and incomplete, corroded copper-alloy finger-ring, probably of post-medieval date. On one side the hoop has broken just below the shoulders. What remains of the hoop on the other sides has been bent outwards. The bezel is broadly oval in plan with a central rectangular recess. The sides of the bezel are bevelled and faceted with two shield shape moulding at the shoulders and two rectangular mouldings at the sides, all the mouldings shallowly concave. The recess is bevelled on all internal sides down to a central sub-square perforation. The setting has been lost. The sides tap…
Created on: Monday 27th June 2011
Last updated: Tuesday 28th June 2011
Spatial data recorded.


  • Thumbnail image of HAMP-3A0480

Record ID: HAMP-3A0480
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn and corroded possible copper-alloy coin weight of medieval or post-medieval date. It is circular and seemingly decorated unifacially, although both surfaces are highly corroded. The upper face appears to depicts a ship. It has a rounded circumference. The design and size of this coin weight are consistent with it relating to a noble, if anything. Withers & Withers (1995, 18-19) illustrate these 15th- and 16th-century coin weights.
Created on: Tuesday 21st February 2012
Last updated: Tuesday 21st February 2012
Spatial data recorded.


  • Thumbnail image of HAMP-8024D7

Record ID: HAMP-8024D7
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, bent early 17th-century silver post-medieval halfgroat of James I, second issue, London mint (c. 1605 - c. 1606 AD; North 2104)
Created on: Tuesday 2nd August 2011
Last updated: Thursday 4th August 2011
Spatial data recorded. This findspot is known as 'Otterbourne CP', grid reference and parish protected.


  • Thumbnail image of HAMP-F63887

Record ID: HAMP-F63887
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A highly worn and bent later 16th-century silver post-medieval halfgroat of Elizabeth I struck at London (c. 1595 - c. 1598 AD; North 2016)
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: HAMP-81F423
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn and corroded 17th-century copper-alloy post-medieval rose farthing of Charles I (1625-1649 AD)
Created on: Wednesday 27th October 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded.


  • Thumbnail image of HAMP-AB3643

Record ID: HAMP-AB3643
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A worn and incomplete early 16th-century silver post-medieval groat of Henry VII, London mint (1505-1509 AD; North 1747). This coin has been bent and has suffered circumferential cracks and losses.
Created on: Monday 24th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Boldre CP', grid reference and parish protected.


  • Thumbnail image of HAMP-8703F4

Record ID: HAMP-8703F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn, clipped and incomplete 17th-century silver post-medieval halfgroat of Charles I, Group D, minted in London (1643-1645 AD; North 2258). This coin has been doublestruck on the obverse.
Created on: Friday 14th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded.


  • Thumbnail image of HAMP-EEB4C6

Record ID: HAMP-EEB4C6
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn and clipped late 16th-century Spanish silver 2 reales 'cob' piece probably of Philip II (1556-1598), Seville mint (probabaly struck c. 1592 - c. 1598 AD)
Created on: Thursday 15th July 2010
Last updated: Wednesday 4th August 2010
Spatial data recorded. This findspot is known as 'Abbotts Ann CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-DBD621
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn and corroded post-medieval copper farthing of Charles II (1672-1679 AD; Spink 3394)
Created on: Thursday 8th April 2010
Last updated: Thursday 8th April 2010
Spatial data recorded.


  • Thumbnail image of HAMP-E80B75

Record ID: HAMP-E80B75
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn, bent and cracked 16th-century silver post-medieval groat of Henry VIII, Third issue, Southwark mint (1544-1547 AD; North 1845). The coin has suffered considerable circumferential losses.
Created on: Monday 14th September 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Buriton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-1E9916

Record ID: HAMP-1E9916
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly worn, clipped and bent 17th-century silver post-medieval penny of Charles I, probably Group D, London mint (c. 1634 - c. 1643 AD; probably North 2270)
Created on: Tuesday 29th September 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Andover CP', grid reference and parish protected.


  • Thumbnail image of HAMP-70EF84

Record ID: HAMP-70EF84
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn post-medieval silver 16th-century halfgroat of Edward VI minted in the Tower mint (London) and dating to between 1547 and 1551 AD (North 1877). It was struck in the name of his father, Henry VIII and bears a Henrician bust and legend. The circumference has been abraded and has suffered some losses.
Created on: Monday 1st February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-CCA317

Record ID: HAMP-CCA317
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, clipped and bent 16th-century silver post-medieval coin: possibly a halfgroat of Elizabeth I struck at London (c. 1583 - c. 1603 AD; possibly North 2016). This coin has suffered some circumferential losses.
Created on: Monday 6th December 2010
Last updated: Tuesday 7th December 2010
Spatial data recorded.


  • Thumbnail image of HAMP-4BBF70

Record ID: HAMP-4BBF70
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A worn and clipped early 17th-century base silver post-medieval Irish sixpence of Elizabeth I, 3rd (base) coinage (1601-1602 AD; Spink 6508). This coin has been pierced through the reverse, probably for re-use as a jewellery item; the piercing is just within the inner circle. It is at around 3 o'clock on the obverse and around 9 o'clock on the reverse.
Created on: Friday 25th June 2010
Last updated: Monday 12th July 2010
Spatial data recorded.


  • Thumbnail image of HAMP-4C2B87

Record ID: HAMP-4C2B87
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A very worn, corroded, slightly clipped and bent copper-alloy coin: probably a douzain of Henry IV of France, uncertain mint (c. 1589 - c. 1610 AD). This coin has received a counterstamp, just off centre on the reverse. Such a countermark of a fleur de lis in oval of pellets revalued the coin at 15 deniers under Louis XIII during the ordinance of June 1640. The strength of the stamp may account for much of the bending to the flan.
Created on: Friday 25th June 2010
Last updated: Thursday 15th July 2010
Spatial data recorded.


1 - 40 of 62 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.