Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: institution
    • Object type: VESSEL

  • Thumbnail image of WILT-B61407

Record ID: WILT-B61407
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy Post-medieval sheet rivet which would have been used to hold repairs to a vessel in place. The artefact is broadly rectangular in form. It have been folded in on themselves from the sides before being folded back, the folds protruding beyond the side.
Created on: Friday 15th June 2012
Last updated: Friday 15th June 2012
Spatial data recorded.


  • Thumbnail image of SUSS-FD12C6

Record ID: SUSS-FD12C6
Object type: VESSEL
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Rim fragment from a copper alloy vessel, probably of a type used for cooking. The fragment is 39.7mm long, 43.7mm wide, 3.6mm thick in the body and weighs 34.3 grams. The rim flares outwards at an angle of 120 degrees to the body and has an uneven edge. The rim is 10.4mm wide at the widest 4.2mm thick. The curve of the rim suggests the original vessel had a diameter of 24cm. There are traces of sooting on the outside, suggesting a cauldron or other cooking vessel.
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-FD4600

Record ID: SUSS-FD4600
Object type: VESSEL
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy pot leg and foot fragment. 45.1mm long, 30.7mm wide, 21.4mm thick and weighs 101 grams. The fragment is heavily worn but appears to be angled at about 60 degrees. The back is plain. The front has two vertical grooves creating a slightly tri-bobed appearence; just below the top is a raised horizontal band with a semi-circular profile. The top is smooth with slight grooves rather than broken and has a central raised, rough section that may have held a rivet. There appears to be traces of sooting on the foot, this, and its size, suggests it may come from a cooking vessel.
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-C241D1

Record ID: SUSS-C241D1
Object type: VESSEL
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Cast lead vessel repair (pot mend). Oval with two irregularly shaped outer sides joined by a smaller central section. In the groove created between the outer sides there are traces of the original pot. The pottery appears to be of sandy dark orange fabric. It is 36.8 mm by 32.6mm, 10.2 mm thick and weighs 48.07 g. Pot mends of this form are found in both Roman and Medieval periods, as a common way to repair broken pottery. The remains of the original pot seem to be Roman in date although it is too fragmentary to be completely certain.
Created on: Thursday 13th May 2010
Last updated: Monday 17th May 2010
Spatial data recorded. This findspot is known as 'Udimore', grid reference and parish protected.


  • Thumbnail image of SUSS-A929B4

Record ID: SUSS-A929B4
Object type: VESSEL
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy vessel repair formed of two broadly rectangular pieces of copper alloy sheet with irregular, broken edges. They are held together by three folded copper alloy sheet rivets, probably of the 'folded lozenge style which was popular in the Medieval period. The fragment measures 59.3mm in length, 18.7mm in width and is 4.9mm at its thickest point. It weighs 12.42 grams.
Created on: Tuesday 17th August 2010
Last updated: Thursday 2nd September 2010
Spatial data recorded. This findspot is known as 'Steyning', grid reference and parish protected.


  • Thumbnail image of SOM-CB4AD2

Record ID: SOM-CB4AD2
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Medieval or Post-Medieval copper alloy vessel rim. The rim is slightly thickened with a slight swelling on the inner side. The outer surface is roughly cast and covered with soot, the inner surface is smooth. The curve of the fragment suggests the vessel was 200-240mm in diameter but from such a small fragment it is hard to be certain. The fragment is 38mm long and 24.3mm wide, and its thickness varies from 1.6 mm to 3.5mm near the rim. It weighs 9.68 grams.
Created on: Wednesday 23rd May 2012
Last updated: Wednesday 23rd May 2012
Spatial data recorded. This findspot is known as 'St Cuthbert Out CP', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B60534
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Twenty sherds of Roman Poole-Wareham Black Burnished ware (BB1), 100-410 AD, sixteen body sherds and four rim sherds. The sherds mostly have dark inner and outer surfaces and a slightly lighter inner core; some have re-oxdised to shades from mid-orange to mid-grey from later burning others appear lighter as the darker surface has been lost. A few, mostly the rims, still have traces of burnishing but most are highly abraded with the original surface worn away. The fabric is fairly coarse, with the distinctive cods-roe fracture. It is tempered with abundant rounded quartz (less than …
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B51811
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Seven cast lead vessel repairs (pot mends). All have the characteristic H-shaped section with two irregularly shaped outer sides, one larger than the other, joined by a smaller central section. None of them retain any of the original pot in the grrove created between the outer sides. Total weight 70.04 grams. Pot mends of this form are found in both Roman and Medieval periods, as a common way to repair broken pottery vessels. The lack of any vessel material left in the groove means they cannot be dated directly but they are likely to be Roman given the other material on the site.
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B57272
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Nine sherds of Roman greyware vessels, eight body sherds and one rim sherd. The fabric is mid to pale grey throughout. It is tempered with varying quantities of poorly sorted rounded quartz (less than 2mm), dark iron ore (less than 1mm), and sparse fine mica (less than 0.5mm), with frequent rounded voids (less than 1.5mm). The rim is everted with a rounded outer edge but too short to accurately estimate the diameter.The breaks are mostly very abraded with some fresher breaks. Total weight 37.67 grams.
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Thumbnail image of SOM-2EFA02

Record ID: SOM-2EFA02
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Medieval to Post Medieval copper alloy foot from a copper alloy vessel, the leg is now missing. The foot has a trapezoidal base with a ridge down the centre. It measures 71.7mm in length, 41.9mm in width, 19.4mm in thickness and the weight is greater than 110g. Dated broadly to 1250-1600.
Created on: Wednesday 28th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-D66AA0

Record ID: SOM-D66AA0
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a Medieval to Post Medieval vessel. The leg appears trapezoid shaped in cross section with a flat front and rounded back. The leg terminates in an outward facing foot. The front of the leg has a raised central rib running down the lengh. It measures 86.1mm in length, 52.9mm in width and 25.0mm in thickness. Butler, Green and Payne (2009, pg 4) do not record an example identical to this but it is perhaps most similar to their Type 'a' which was widespread in the Medieval period with examples known into the early 17th century.
Created on: Thursday 6th October 2011
Last updated: Friday 14th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Image not taken

Record ID: SOM-CB9B15
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval fragment of a copper alloy cast leg from a cooking vessel. The fragment is 'D'-shaped in section with a notched curved outer edge created by five ribs that run down the front. It measures 57.3mm in length, 46.6mm in width, 23.6mm in thickness and weighs 86.82g. Butler, Green and Booth (2003; 4) suggests that legs such as these were widespread by the 17th century.
Created on: Wednesday 5th October 2011
Last updated: Friday 7th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-910875

Record ID: SOM-910875
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy medieval or post-medieval vessel leg or handle. It has been mis-cast, the front and one side appear complete. The back and one side is missing. The current back surface is flat and there are metal runs, probably signs of mis-casting where the metal does not seem to have completely filled the mould, leaving one side of the leg mis-shapen rather than broken. The leg is trapezoidal in plan, wider at the point where it would have attached to the body of the vessel and tapering to the terminal; a square end with rounded corners, one corner of which is missing to an old …
Created on: Thursday 25th October 2012
Last updated: Thursday 25th October 2012
Spatial data recorded. This findspot is known as 'Bawdrip', grid reference and parish protected.


  • Thumbnail image of SOM-2F90E5

Record ID: SOM-2F90E5
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy late medieval or post medieval fragment of vessel repair or handle attachment. The piece is roughly rectangular in shape, and consists of two metal sheets riveted together. One edge is complete on both sheets, another straight edge remains on one sheet (the inner sheet), meeting the first at a c.80 degree angle. The other edges are irregular and torn with old breaks. The outer sheet has a bent over corner and is covered in extensive remains of black sooting. There is a rolled copper alloy sheet rivet holding the two pieces together. It has been pushed through from the i…
Created on: Friday 14th March 2014
Last updated: Tuesday 18th March 2014
Spatial data recorded. This findspot is known as 'North Curry CP', grid reference and parish protected.


  • Thumbnail image of SOM-409A17

Record ID: SOM-409A17
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy pot foot and part of the leg. The leg is D shaped in section with a flat back; it is broken off just above a transverse collar with an old break. The prominent collar is rounded in section. The foot is also D shaped in section with five very worn moulded ribs running down the front and a flat back. The base of the foot is rounded. It is 37.9mm long, 23.5mm wide and 14.1mm thick; it weighs 44.75 grams. Crudely made cast copper alloy vessels were widely used from c.1100-1800 for serving and cooking. Butler et al (2009, 4) suggest there were four main t…
Created on: Thursday 27th March 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Willand CP', grid reference and parish protected.


  • Thumbnail image of SOM-E48573

Record ID: SOM-E48573
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy late medieval or post medieval fragment of vessel repair or handle attachment. The piece is roughly rectangular in shape, though with one edge expanding in a curve, and consists of two metal sheets riveted together. Both sheets have been cut to the same shape. though one has lost about a third compared to the other. The sheets are connected by two rolled copper-alloy sheet rivets; this would have been three when the borken sheet was complete. The rivets have been pushed through from one side and is flattened and smoothed on the other, flush with the sheet. They were pro…
Created on: Wednesday 16th April 2014
Last updated: Monday 2nd June 2014
Spatial data recorded. This findspot is known as 'Cullompton CP', grid reference and parish protected.


  • Thumbnail image of SOM-9894C7

Record ID: SOM-9894C7
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy foot fragment from a cooking vessel, dating from the Medieval to Post Medieval periods. The fragment has a triangular cross section, expanding in width towards the foot. There are round protrusions at the end of the two sides of the foot. It measures 30.3mm in height, 47.5mm in width and 32.9mm in thickness. It weighs 99.57g.
Created on: Sunday 8th January 2012
Last updated: Thursday 2nd February 2012
Spatial data recorded. This findspot is known as 'Lydford On Fosse', grid reference and parish protected.


  • Thumbnail image of SOM-D5C280

Record ID: SOM-D5C280
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy leg from a Medieval to Post Medieval vessel. The leg is broadly trapezoid in cross section with a central rib running down the length of the wider flat front. The rib has a rounded front. There is an old break at the top. The leg is rectangular but is worn around the lower edge with one corner broken. It measures 48.8mm in length, 41.2mm in width by 17.5mm in thickness including the rib, 13.0 excluding; it weighs 115g. There are extensive traces of black sooting on both sides. Butler, Green and Payne (2009, pg 4) suggest that this form (type a) was widespread in …
Created on: Wednesday 11th January 2012
Last updated: Wednesday 11th January 2012
Spatial data recorded. This findspot is known as 'Martock', grid reference and parish protected.


  • Thumbnail image of SOM-642B42

Record ID: SOM-642B42
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A Medieval to post-Medieval leg/foot from a cast copper-alloy cooking vessel (c. 1250-c. 1650 AD). The object is trapezoidal in cross-section throughout its length, wider at the front than the back. On the front there is a central vertical rib. The base is flat and the top ends in an old abraded break. It is 36.3mm long,27.8mm wide, 29.2mm thick and weighs 79.69 grams. Cast cooking vessels seem to have come into use in the second half of the 13th century and to have continued at least until c. 1650 (Geake 2001, 52).Butler, Green and Payne (2009, pg 4) suggest that this form (th…
Created on: Friday 16th November 2012
Last updated: Friday 18th January 2013
Spatial data recorded.


  • Thumbnail image of SOM-38EEED

Record ID: SOM-38EEED
Object type: VESSEL
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Rim fragment from a late Medieval or Post Medieval cast copper- alloy vessel. The fragment is triangular in shape. It is 25.0mm along the curved top, one side is 26.3mm long, the other is 19.6mm long. The rim is plain, thinning on the innerside to a sharp edge then quickly thickening to 3.0mm thick down the length. It originally angled straight out at c.45 degrees and is not dished. The internal surface is smoother than the outer. On the outer face 9.0mm below the rim is a pair of ridges running around the circumference of the vessel, each emphasised by indented lines of var…
Created on: Monday 13th July 2015
Last updated: Monday 20th July 2015
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 34
Search server index: valhalla

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 72
  • Mean quantity: 2.118
  • Maximum: 20

Filter your search

1 - 20 of 34 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.