Record ID: SUSS-360447
Object type: STRAP END
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Two copper alloy rings, formed of a double loop of square sectioned wire the ends and middle of which are attached to each other and to the top of a knop. The knop has a circular top to which the wire is attached below which is a constriction then a oval terminal. Both the loops and terminal are complete with no breaks suggesting it was suspended from another obect through the loops. It is 20.1mm long, 16.6mm wide and the wire is 1.2mm thick; it weighs 1.06 grams. It is unclear what this is from. The finder has suggested a parallel with a wire looped terminal on a Medieval …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Winchester', grid reference and parish protected.

Record ID: SUR-D13AD4
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A trader's token issued by William Joyce of Salisbury WILLIAM IOYCE/ A camel couchant IN SARVM 1652/ W I
Created on: Wednesday 26th May 2010
Last updated: Wednesday 26th May 2010
Spatial data recorded.

Record ID: SUR-7D20E6
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A halfpenny trader's token issued by William Taylor of Winchester.
Created on: Tuesday 15th December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: SOM-836E32
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A incomplete copper alloy clog or shoe clasp of Late Post-Medieval or Modern date (c. AD 1790 - c. AD 1930). The main part of the clasp, the plate is rectangular in shape. At one end there is an integral "anchor"-shaped hook with a C-shaped hook on a narrow neck projecting from the cnetre of the end of the plate. The front of the plate is inlaid in silver with a floral pattern. There is a flower head in each corner: the two in the upper part are made up of 6 pellets each and the two lower ones with 7 pellets each. The flower heads on each side are linked by a curved 'stem'. In the cen…
Created on: Tuesday 30th October 2018
Last updated: Thursday 1st November 2018
Spatial data recorded. This findspot is known as 'Penton Grafton', grid reference and parish protected.

Record ID: SOM-56EB3D
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A Post-Medieval coin, probably a groat, of Elizabeth I dating from 1558 to 1561. Initial mark unclear. Minted at London. Probably North (1991:133) No. 1986.
Created on: Thursday 15th February 2018
Last updated: Tuesday 13th March 2018
Spatial data recorded. This findspot is known as 'Whitchurch, Hampshire', grid reference and parish protected.

Record ID: PUBLIC-750008
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy mount. It has a central D shaped section with incised radiating lines creating a scallop shell appearance. There are large lobed knops projecting from the opposite ends (one in the centre of the straight edge of the D one in the centre of the curve). The one projecting from the straight edge starts with a narrow projecting bar which expands into a terminal in the form of a square flanked by triangles. The opposite projection has a large oval knop topped by a smaller more pointed oval knop with a horizontal incised line across the middle of it, possibly…
Created on: Saturday 3rd April 2010
Last updated: Monday 7th June 2010
Spatial data recorded.

Record ID: HAMP-AB3643
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete early 16th-century silver post-medieval groat of Henry VII, London mint (1505-1509 AD; North 1747). This coin has been bent and has suffered circumferential cracks and losses.
Created on: Monday 24th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Boldre CP', grid reference and parish protected.

Record ID: HAMP-37EDB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded, plain copper-alloy rivet-like object which might have been used to hold repairs to a vessel in place. It is sub-oval in plan with a possibly break giving a broadly straight edge to one side. On the lower surface there is an integral protruding prong towards this edge whose terminal protrudes to one side and is flattened at the base. Rolled sheet rivets replaced the earlier folded sheet rivets in pot repairs from the late 15th - 16th centuries (Egan 2005, 101) suggesting a possible late medieval to post-medieval date for this piece. It is of a red-brown metal with patches o…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Headbourne Worthy CP', grid reference and parish protected.

Record ID: HAMP-CCA317
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, clipped and bent 16th-century silver post-medieval coin: possibly a halfgroat of Elizabeth I struck at London (c. 1583 - c. 1603 AD; possibly North 2016). This coin has suffered some circumferential losses.
Created on: Monday 6th December 2010
Last updated: Tuesday 7th December 2010
Spatial data recorded.

Record ID: HAMP-2BEC46
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded fragment from a cast copper-alloy hooked mount of post-medieval date. The fragment consists of the lower part of the mount, including the hook and the lower part below a rivet hole. Within this lower rivet hole corroded remains of an iron rivet. The sides of the mount are scalloped with rounded protrusions to the sides. The inward-turning hook has been bent slightly to one side as a result of old damage. The metal has corroded to a red-brown colour with larges areas of light-green and off-white corrosion product.
Created on: Monday 21st February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.

Record ID: HAMP-CE5F95
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete cast lead cloth (alnage) seal of post-medieval date. Only one of the possible pair (or more) of discs survives. In low relief it is inscribed with the following lettering: '4 (inverted)? II//I M'. The other surface is plain. The angular sides of the seal suggest that it may have been cut deliberately.
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Overton CP', grid reference and parish protected.

Record ID: HAMP-D002C5
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete sub-rectangular cast copper-alloy mount of post-medieval date. The object is flat with a main rectangular body which incurves at one end to a width of 4.4mm before an old break; it appears to be truncated at the other end due to old damage. Before the end narrows there is a pair of double transverse grooves on the upper surface between which possible decoration within a rectangular field now obscured by corrosion. The main body beyond has grooves running just inside the long edges. The field within appears plain, again perhaps a product of corrosion, apar…
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Broughton CP', grid reference and parish protected.

Record ID: HAMP-5EB3E0
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy post-medieval plain double-looped buckle frame. The frame is missing one of its loops after an old break at the pin bar. The surviving loop is trapezoidal, with a flat lower surface and an upper surface which is bevelled externally. This gives the frame a triangular cross-section, while the pin bar is semi-circular in section. There is a knopped protrusion at each end of the pin bar. Traces of orange corrosion product at one end of the pin bar suggest that the pin may have been made of iron. The frame has a dark-grey surface where it survive…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5EF961
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy double-looped buckle frame of medieval to early post-medieval date. The frame was formed of two conjoined ovals such that the sides incurve. The frame is bevelled both internally and externally on the upper surface, the latter more shallowly; the lower surface is flat. The pin bar thus has a trapezoidal cross-section. The pin is now largely missing, apart from the orange/brown corroded mass, the remnant of the iron pin. The buckle frame has a variable mid-green colour but is mostly covered in off-white corrosion product. Buckles of this size…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5FC754
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy hooked mount of post-medieval date. The mount is sub-trapezoidal in plan with a cusped upper edge. It tapers towards the hook (now missing), widening slightly just above the hook; the mount has broken as the hook begins. The mount is broadly flat with slight bevelling on its upper surface. It features two iron rivets, one towards the upper edge, the other just below the centre of the plate. Much of the upper rivet survives corroded in place. The copper alloy is covered in an off-white corrosion product over a mid-green metal. Comparable hook…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-4BBF70
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and clipped early 17th-century base silver post-medieval Irish sixpence of Elizabeth I, 3rd (base) coinage (1601-1602 AD; Spink 6508). This coin has been pierced through the reverse, probably for re-use as a jewellery item; the piercing is just within the inner circle. It is at around 3 o'clock on the obverse and around 9 o'clock on the reverse.
Created on: Friday 25th June 2010
Last updated: Monday 12th July 2010
Spatial data recorded.

Record ID: HAMP-EA5603
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued in Andover for the benefit of the disabled poor in 1666 (Williamson 14)
Created on: Friday 20th August 2010
Last updated: Tuesday 27th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.

Record ID: HAMP-EAB442
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued by the Winchester grocer William Butler in 1657 AD (Williamson 214). Around a quarter of the flan has been lost due to old breaks in different places at the circumference.
Created on: Friday 20th August 2010
Last updated: Wednesday 28th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.

Record ID: HAMP-25E8B3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy post-medieval shoe or knee buckle. The buckle is rectangular in plan with rounded corners. It is bevelled externally on the upper surface and rabetted at the outer edge. The bevelling is echoed internally on the lower surface. There is a elongated 'C'-shaped moulding on the upper surface along the longer sides and extending into the internal side of the outer edge, terminating in a curl. Central expansions on the longer sides have been drilled to take the separate pin bar. This latter survives in situ; being made of iron it is highly corroded. There a…
Created on: Monday 23rd August 2010
Last updated: Wednesday 12th January 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.

Record ID: HAMP-25F3B2
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy spherical animal ('crotal') bell of post-medieval date (c. 17th century AD). The sub-rectangular suspension loop at the top is 6.9mm in length. The curve of the bell continues under the loop suggesting it was made using the detachable sprue-piece method developed in the 17th century. The upper and lower hemispheres are divided by a prominent horizontal circumferential rib. At either side of the suspension loop, about halfway down the side of the upper hemisphere, is a circular sound hole. Across the lower hemisphere is a rectangular sound slot opening into a circul…
Created on: Monday 23rd August 2010
Last updated: Wednesday 16th November 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-260461
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete cast copper-alloy cast spherical bell of post-medieval date (c.1500-1650 AD). The bell is spherical and comprises two hemispherical domes with a raised circumferential join. The top hemisphere has two circular sound holes and a square suspension loop with drilled circular hole projecting from the top. The hole was drilled later into the solid cast loop suggesting it was made before the introduction of the detachable 'sprue-piece' method in the mid-17th century. The lower side of this drilled hole has broken or worn through the top of the bell leaving a slot. The lower hemis…
Created on: Monday 23rd August 2010
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-2A7BB3
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy button inlaid with enamel of late medieval or early post-medieval date (15th-16th century AD). The button has a square head 17.1mm by 16.7mm and 2.5mm thick; it is flat on the front with a recessed cell within a plain border, in the centre of which is a raised circle containing a second cell. The outer cell contains fragments of very glassy red enamel at the cardinal points, and the central cell contains green enamel. From the centre of the flat back projects a rectangular sectioned lug with semi-circular end and a circular hole drilled through it; the back has tra…
Created on: Monday 23rd August 2010
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-EF6265
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A damaged spherical cast copper-alloy post-medieval animal 'crotal' (bell). This complete example has a sub-square suspension loop between two circular sound holes located on the upper hemisphere. The sound holes are recessed on the outer surface and measure c. 5/6mm in diameter. The upper hemisphere is plain. The suspension loop has a angled top and the curve of the bell continues through the opening suggesting it was made using the detachable sprue-piece casting method developed in the 17th century. The loop measures up to 10mm in height by 11.9mm in width by 5.15mm thick. There …
Created on: Friday 8th October 2010
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-8F5DD0
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A broken and incomplete, corroded copper-alloy finger-ring, probably of post-medieval date. On one side the hoop has broken just below the shoulders. What remains of the hoop on the other sides has been bent outwards. The bezel is broadly oval in plan with a central rectangular recess. The sides of the bezel are bevelled and faceted with two shield shape moulding at the shoulders and two rectangular mouldings at the sides, all the mouldings shallowly concave. The recess is bevelled on all internal sides down to a central sub-square perforation. The setting has been lost. The sides tap…
Created on: Monday 27th June 2011
Last updated: Tuesday 28th June 2011
Spatial data recorded.

Record ID: HAMP-7FBA90
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn, slightly clipped and bent 16th-century silver early post-medieval halfgroat of Henry VIII, Second issue, York mint under Archbishop Thomas Wolsey (1526-1529 AD; North 1805)
Created on: Tuesday 2nd August 2011
Last updated: Thursday 4th August 2011
Spatial data recorded. This findspot is known as 'Otterbourne CP', grid reference and parish protected.

Record ID: HAMP-87DB01
Object type: SPOON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A damaged and incomplete cast copper-alloy post-medieval spoon consisting of most of the bowl and part of the handle (c. 17th century AD). Little of the handle now survives; the old break reveals a square cross-section. There is a concave depression on the lower surface at the junction of handle and bowl. The bowl was fig shaped but has suffered losses to one side and along the tip. It has a flattened rim all around. It has received numerous strikes that have resulted in the base being pushed upwards near the centre, as well as the losses mentioned and abrasions at the tip. The spoon …
Created on: Tuesday 20th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded.

Record ID: HAMP-6E7D16
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy sheet binding, sub-circular in plan, of probable post-medieval date. The piece has suffered a longitudinal crack but it has only been slightly distorted in plan. The thin strip is flat at one end and cusped on the other other giving it the superficial appearance of a crown. The cusping is formed of triangles each with small semicircular cusps. An upper zone from just below the cusps is delineated by a double longitudinally incised line; the area below is plain, as is the internal surface. The upper zone is decorated with punched curvilinear decoration. Above the longitu…
Created on: Thursday 13th October 2011
Last updated: Thursday 13th October 2011
Spatial data recorded. This findspot is known as 'Abbotts Ann CP', grid reference and parish protected.

Record ID: HAMP-8703F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn, clipped and incomplete 17th-century silver post-medieval halfgroat of Charles I, Group D, minted in London (1643-1645 AD; North 2258). This coin has been doublestruck on the obverse.
Created on: Friday 14th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded.

Record ID: HAMP-0CFD22
Object type: JETTON
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and corroded 16th-century copper-alloy post-medieval anonymous Nuremberg jetton of the 'Rose / orb' type with fictitious legend. About 10% of the circumference has been cut straight and there is a small crack to one side of the cut. Similar examples with a wide range of fictitious legends can be found illustrated in Mitchiner (1988, 382-383) where they are dated to the first half of the 16th century.
Created on: Tuesday 22nd December 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-70EF84
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn post-medieval silver 16th-century halfgroat of Edward VI minted in the Tower mint (London) and dating to between 1547 and 1551 AD (North 1877). It was struck in the name of his father, Henry VIII and bears a Henrician bust and legend. The circumference has been abraded and has suffered some losses.
Created on: Monday 1st February 2010
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-F51624
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A slightly bent and highly corroded copper-alloy post-medieval trader's token farthing, issued by Romsey grocer Isaac Knight in 1664 AD (Williamson 174). This token has suffered a loss to its circumference.
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-F63887
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A highly worn and bent later 16th-century silver post-medieval halfgroat of Elizabeth I struck at London (c. 1595 - c. 1598 AD; North 2016)
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-4989D3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A fragment from a cast copper-alloy post-medieval buckle, probably a shoe buckle: it bowes. The frame would have been rectangular with rounded corners; less than half of the buckle remains. The pin, now missing, would have been joined to the frame at two centrally drilled holes along its width; half of one of the holes is present on the fragment. The frame is raised around the spindle hole. The buckle is moulded on its upper surface, with a slightly rebated border. In each internal corner is an arc that terminates in a circle within which a punched ring-and-dot motif. The circles prot…
Created on: Monday 20th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-E80B75
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A very worn, bent and cracked 16th-century silver post-medieval groat of Henry VIII, Third issue, Southwark mint (1544-1547 AD; North 1845). The coin has suffered considerable circumferential losses.
Created on: Monday 14th September 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Buriton CP', grid reference and parish protected.

Record ID: HAMP-1E9916
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A slightly worn, clipped and bent 17th-century silver post-medieval penny of Charles I, probably Group D, London mint (c. 1634 - c. 1643 AD; probably North 2270)
Created on: Tuesday 29th September 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Andover CP', grid reference and parish protected.

Record ID: HAMP-EA7EF7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy asymmetrical double-looped buckle frame of post-medieval date. One loop of the buckle is rounded, with two projecting lobed knops, top and bottom, and the other half is rectangular, with five equally-spaced transverse notches on the outer edge which form six lobed knops. At each end of the pin bar there is a further lobed knop. The pin is now missing; iron staining around the pin bar and outer edge reveals the pin's composition. The buckle has a flat reverse, while the upper face is bevelled both internally and externally to the loops. The tinning on the buckle ha…
Created on: Wednesday 19th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded. This findspot is known as 'Ringwood CP', grid reference and parish protected.

Record ID: HAMP-EABA46
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy double-looped buckle frame of medieval to early post-medieval date. The frame is formed of two conjoined ovals such that the sides incurve. The frame is bevelled both internally and externally on the upper surface, the latter more shallowly; the lower surface is flat. The pin bar thus has a trapezoidal cross-section. The pin is now missing. The buckle frame has corroded to a variable mid/dark-green colour. Buckles of this size with double oval frames have been found in late medieval contexts (cf. Egan and Pritchard 1991, 82-83; refs. 332-333), but as the form persi…
Created on: Wednesday 19th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded. This findspot is known as 'Ringwood CP', grid reference and parish protected.

Record ID: HAMP-EAD863
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy double-looped buckle of post-medieval date, complete with pin. The loops are oval and are bevelled both externally and internally on the upper surface; the former is far shallower. The lower surface is flat giving the frame a sub-triangular cross-section. At both ends of the pin bar is a pointed knopped protrusion. Loosely looped at the centre of the bar is a copper-alloy cast pin of semicircular cross-section. In profile one of the loops has been bent upwards on one side at an angle of c. 10 degrees. The buckle has a shiny, dark-green patina where it survives ove…
Created on: Wednesday 19th October 2011
Last updated: Wednesday 19th October 2011
Spatial data recorded. This findspot is known as 'Ringwood CP', grid reference and parish protected.

Record ID: HAMP-96BEA2
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A post-medieval/modern gunflint from a flintlock musket. The flint is broadly rectangular in plan. The ventral surface is smooth and relatively flat; the strikes come in at an angle; the bulb of percussion is absent. The dorsal face is bevelled on all sides, more shallowly towards the distal end where the bevelled area widens, and very haphazardly at the proximal end due to frost fracturing. There is some retouching to the distal end. The flint is a mid- to light-grey/brown colour. The relative crudeness of this gunflint suggests that it may have been a replacement generated in the field.
Created on: Tuesday 8th November 2011
Last updated: Wednesday 9th November 2011
Spatial data recorded.

Record ID: HAMP-4E0C41
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A copper-alloy mount in the form of a Tudor rose of post-medieval date (16/17th century AD). This small mount is essentially flat and in the form of a double five-petalled rose with small pointed lobes in the cusps. The centre of the upper surface is moulded in low relief with five arms emerging from a central point to join the side of the internal rose. Between each arm a small spur springs from the side of the internal rose; thus five heart shaped cells are created. In one of these white enamel survives in place. In an adjacent cell formed between the roses is red enamel, and w…
Created on: Sunday 8th December 2013
Last updated: Monday 9th December 2013
Spatial data recorded.