Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security):001422EDE4401AC3
    • Sort:institution
    • Broad period:POST MEDIEVAL
    • County:West Sussex
    • Institution:SUSS

  • Thumbnail image of SUSS-A5D4C1

Record ID: SUSS-A5D4C1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval copper alloy token farthing minted for William Smith of Steyning, Sussex in 1667. Williamson Vol 3. p.1182, Sussex No.165. William Smith was a mercer. There is a reference, in Sussex Archaeological Collections 19 p.95, to a William Smith of Steyning who had an estate worth £20 seized by parliment in 1655 because the owner was either a Royalist or a Catholic (the ordnance covered both). This may or may not be the same person as issued the tokens but Williamson suggests it is.
Created on: Thursday 18th December 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-B663A4

Record ID: SUSS-B663A4
Object type: PIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A broken cast copper-alloy pin with spherical filigree head of early post-medieval date (c. 16th century AD). The pin shaft is circular in cross section with a spherical knop at one end which projects just beyond the pin head. The other end is bent through 45 degrees and broken just below the head. The remainer is 22.1mm long by 1.9mm in diameter. The whole piece weighs 1.94 grams. The head is unusual, in that, unlike other similar examples e.g.HAMP-A136D5, it is hollow with no central ball onto which the filigree was applied. The head is 12.1mm in diameter and divided into hemisphere…
Created on: Wednesday 31st December 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-793310

Record ID: SUSS-793310
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver sixpence of Elizabeth I (1558 - 1603), dated 1574 on coin. Initial mark: Eglatine. North 1997.
Created on: Thursday 3rd June 2010
Last updated: Thursday 3rd June 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of SUSS-79D122

Record ID: SUSS-79D122
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval silver threepence of Elizabeth I (1558 - 1603), dated 1575 on coin. Initial mark: Eglatine. North 1998.
Created on: Thursday 3rd June 2010
Last updated: Thursday 3rd June 2010
Spatial data recorded. This findspot is known as 'Patching', grid reference and parish protected.


  • Image not taken

Record ID: SUSS-FA7B55
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post mediveal, copper alloy, farthing of Charles II (1660 - 1685), date is illegible, 1672-1679 AD. Pierced with a square hole just off centre.
Created on: Wednesday 9th June 2010
Last updated: Wednesday 9th June 2010
Spatial data recorded. This findspot is known as 'Chichester Area', grid reference and parish protected.


  • Thumbnail image of SUSS-25F306

Record ID: SUSS-25F306
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast lead-alloy uni-face circular token, 1500-1850 AD. The token has the raised initials TP on one side. The reverse appears to have a raised pellet towards one edge but this could possibly be a casting flaw. The token measures 18.2 mm in diameter, 1.9 mm thick, and weighs 3.84 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date.
Created on: Friday 11th June 2010
Last updated: Saturday 12th June 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of SUSS-1A84C1

Record ID: SUSS-1A84C1
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver groat of Mary I (1553-1554), initial mark pomegranate, 1553-4 AD, North 1960
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-1AB834

Record ID: SUSS-1AB834
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post medieval silver halfgroat of Charles I (1625-1649), Group D, Fourth bust, initial mark tun, 1636-1638 AD, North 2257
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Image not taken

Record ID: SUSS-1B0E41
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy farthing of Charles I (1625-1649), Rose Farthing Type 2, initial mark unclear, 1636-1644 AD, North 2291.
Created on: Monday 5th July 2010
Last updated: Monday 5th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-1B8B22

Record ID: SUSS-1B8B22
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval seventeenth century traders token farthing of unclear trader and town, 1648-1672 AD
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-F469B6

Record ID: SUSS-F469B6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Probably a strap fitting of cast copper alloy, bent over at one end. One end has a rectangular strip, bent over to form a crude hook; it is rectangular in section and appears complete. Below this hook is a raised collar on the front below which the object widens slightly before tapering in gradually and ending in a expanded oval knop at the foot. This lower section, the collar and below, is D shaped in section with a convex front and slightly concave back in the centre. The length is 47.5mm, the width is 8.8mm, and thickness is 3.8mm. The weight is 7.52 grams. It is probably Post m…
Created on: Tuesday 14th September 2010
Last updated: Thursday 23rd June 2011
Spatial data recorded. This findspot is known as 'Chichester district', grid reference and parish protected.


  • Thumbnail image of SUSS-F746B4

Record ID: SUSS-F746B4
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy hooked clasp with openwork design. This is the hooked section of a two part clasp. The main plate is heart shaped with a trefoil opening in the centre. At the top projects a rounded knop containing the residue of an iron rivet in the centre. The lower point of the heart extends downwards and continues into a forward facing blunt hook. The top of the hook is flanked by projecting rounded knops with the residue of a second iron rivet between them. There is evidence of white metal coating, probably tinning. Length 55.3mm, width 21.7mm. Weight 8.49 grams. It is ide…
Created on: Tuesday 14th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of SUSS-3630E5

Record ID: SUSS-3630E5
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A hook piece from a copper alloy Post Medieval (c.1550-1750) book clasp. It is a sub-rectangular piece of copper alloy sheet, with a slightly flared attachment end. At the opposite end is a curved hook (3.6mm wide) the end of which is missing. Below this the main body of the clasp is 9.0mm in width, 9.1mm at the attachment end. At the centre of the attachment end is a perforation through the upper surface for a rivet, now missing. Towards the hook end there is stamped decoration within two fields delineated by transverse zigzag lines. Each field is filled with an 'eye' shaped object: …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of SUSS-474556

Record ID: SUSS-474556
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post medieval cast copper alloy double loop buckle frame. The frame has two oval loops with slightly widened outer edges. The front and back are bevelled and the front is decorated with a raised rim around the inner side of the loops and raised foliate patterns (the pattern is discribed by Whitehead (see below) as vine scroll). There are traces of a black lacquer around the patten. The strap bar is narrowed and recessed. It is very bent and now 45.9mm long, 31.3mm wide, 2.8mm thick and weighs 6.34 grams. Whitehead (2003) illustrates a similar buckle (page 68, No.423) whi…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Patching', grid reference and parish protected.


  • Thumbnail image of SUSS-486225

Record ID: SUSS-486225
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval - Modern cast lead two disc cloth seal. The disks sit one on top of the other and are joined by a tab. One had a hole in the centre and the other a projecting point which has been pushed through the hole and then stamped flat to fix them together. The tab is mostly missing from old breaks. The stamp has the initials R.W. The discs are bent and at most 27.4mm in diameter, 3.7mm thick and it weighs 14.22 grams. The simplcity of the design of initials rather than a privy mark suggests a later date, 17th-18th century (cf Egan p.84, no.234, 236 and p.86, no.242)
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of SUSS-48B4B6

Record ID: SUSS-48B4B6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy sword belt fitting. It is roughly foliate in form, with incised decoration forming a leaf pattern. It has a trefoil shaped terminal at one end below which it narrows before widening to rounded shoulders about a third of the way down from which it tapers to the other end where there are two lugs flanking a forward projecting hook. The hook is oval in cross section and the terminal is lost to an old break. There are two circular fixing holes containing iron corrosion, one near the trefoil terminal and one above the hook. It is 52.6mm long, 22.6mm w…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of SUSS-9100F6

Record ID: SUSS-9100F6
Object type: FURNITURE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Four fragments of wood shaped into objects. The objects are not clear but they are possibly part of furniture rather than tools. They are likely to be Post Medieval in date in line with other material found nearby. No weights area given as this depends on how dry they are. Piece 1: Snapped in two (all the wood is waterlogged and very delicate). Slightly curved (possibly bent once waterlogged) strip of wood with straight, parallel sides, a squared off end and an irregular break at the other end. One side is slightly thicker than the other but this could be from differential …
Created on: Friday 4th June 2010
Last updated: Thursday 12th August 2010
Spatial data recorded.


  • Thumbnail image of SUSS-1AA852

Record ID: SUSS-1AA852
Object type: SCABBARD
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy scabbard chape with angled sides, slightly domed front and hollow back. The lower part of the chape has an oval outline with incised radiating lines on the front creating a scallop shell appearence and a rounded knop projecting down at the centre of the lower edge; the upper part is trapizoid, stepping in at the top of the scallop before widening slightly to the top. The top edge is castellated with two incided horizontal lines below. There is a central quatrefoil shaped apeture. The separately soldered back plate is missing. The chape measures 39.8mm long by 29.7m…
Created on: Friday 23rd April 2010
Last updated: Monday 26th April 2010
Spatial data recorded. This findspot is known as 'Near Arundel', grid reference and parish protected.


  • Thumbnail image of SUSS-735DB2

Record ID: SUSS-735DB2
Object type: HOOKED TAG
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy hooked tag. The tag is flat backed and has a moulded front. The central plate is oval extending into a point at one side with a raised line border containing raised floral/foliate decoration. The oval attachement loop is attached opposite the pointed side and is brocken and bent at one side from an old break. On the opposite side the plate extends out into a point ending in a trefoil terminal. The hook extends from the central leaf of the trefoil. The hook is bent backwards but end in an old break at the start of the bend; it is D shaped in section wi…
Created on: Friday 8th January 2010
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SUSS-7D6712

Record ID: SUSS-7D6712
Object type: MOUNT
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy lozenge shaped mount. The mount is flat on the surface with bevelled edges. On the reverse there are two integral rivets. One of them has broken and is now 3.6 mm long, the other is bent over at 90 degrees and approximately 11.6 mm long at is full length. A piece of dried leather is still fastened on the underside of the mount. The metal surface of the object is a red copper colour with a bright green patina in places. The mount is 32.5 mm, 25.6 mm at its widest point, and wieghs 6.82 grams. It probably dates to 1500 - 1700 AD.
Created on: Thursday 3rd June 2010
Last updated: Friday 4th June 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


1 - 20 of 30 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.