Record ID: BH-28FBD5
Object type: COIN
Broad period: IRON AGE
County: Cambridgeshire
Workflow stage: Awaiting validation
An Iron Age gold quarter stater. Eastern (Catuvellauni) type, struck c. 50 - c. 20 BC. Refs: ABC no. 2469, 'Rose Wings' type (Rudd et al. 2010) = Van Arsdell no. 244. Diameter: 12.1mm; thickness: 1.6mm. Weight: 1.23g.
Created on: Tuesday 1st July 2014
Last updated: Wednesday 9th July 2014
Spatial data recorded. This findspot is known as 'Great and Little Chishill', grid reference and parish protected.

Record ID: BH-785FF3
Object type: COIN
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A Late Iron Age gold stater: Belgae, 'Ladder mane' type, struck c. 50 BC -c. 20 BC. Ref: Cottam et al 2010: 58, no. 764. Dimensions: 17.5mm diameter, 3mm thick. Weight: 5.35g.
Created on: Thursday 29th November 2012
Last updated: Friday 7th December 2012
Spatial data recorded. This findspot is known as 'St. Mary Bourne', grid reference and parish protected.

Record ID: DEV-EFF1B7
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Devon
Workflow stage: Awaiting validation
An incomplete copper alloy Late Iron Age or Early Roman terret, probably dating to c. 200 BC - AD 75. Probably a Simple D-shaped terret; the surviving portion comprises of approximiately 33% of the original frame. The terret frame is sub-circular in cross section, 10.4mm by 9.7mm, tapering into a worn and patinated break. At the opposite end of the fragment, the frame expands into a plain, moulded collar, 12.5mm by 11.5mm, and from which projects a sub-rectangular sectioned bar, 8.9mm by 4.3mm. Dimensions: length 47.3mm; width 12.5mm; thickness 11.5mm; weight 16.81g. The fo…
Created on: Sunday 7th August 2011
Last updated: Thursday 14th June 2018
Spatial data recorded.

Record ID: DEV-011E4D
Object type: SWORD
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A copper alloy pommel from a sword or dagger in the shape of a human bust dating to the later Iron Age (150-50 BC). The bust is moulded in three dimensions, beginning just below the shoulder line, with the point where the thick neck and shoulders meet emphasised with a cast thick line, possibly intended to represent the neckline of a garment. The neck tapers slightly but remains thick at the point where it meets the head. The chin is broad and bearded, with the point of the beard emphasised, giving the chin a somewhat bulbous appearance. The beard continues up to the ears on either…
Created on: Sunday 23rd December 2018
Last updated: Wednesday 15th May 2019
Spatial data recorded. This findspot is known as 'Micheldever', grid reference and parish protected.

Record ID: DEV-5965A6
Object type: SWORD
Broad period: IRON AGE
County: Somerset
Workflow stage: Awaiting validation
A copper alloy pommel from a sword or dagger in the shape of a human bust dating to the later Iron Age (150-1 BC). The bust is moulded in three dimensions, with the lower edge of the shoulder line demarcated by an incised groove which runs around both sides of the object. The bust ends here, at approximately the point of the clavicle. Iron staining on the sides of the shoulder appear to be from the end of the sword rather than expansions at the sides. Directly below this is a sub-rectangular attachment, much marked by iron decay, where the pommel would once have attached to the sw…
Created on: Saturday 2nd February 2019
Last updated: Thursday 7th February 2019
Spatial data recorded. This findspot is known as 'Fitzhead', grid reference and parish protected.

Record ID: ESS-EFBE46
Object type: COIN
Broad period: IRON AGE
County: Essex
Workflow stage: Awaiting validation
British Iron Age gold quarter stater, uninscribed Eastern series (attributed to Trinovantes). 'British G' type, ABC (Cottam et al 2010) 2350 = BMC (Hobbs 1996) 192. Note: Hobbs incorrectly identified this type as the quarter stater linked to the North Eastern gold stater 'British H', rather than the Eastern quarter 'British G' (or 'Clacton' type).
Created on: Monday 17th December 2012
Last updated: Monday 17th December 2012
Spatial data recorded. This findspot is known as 'GREAT TEY', grid reference and parish protected.

Record ID: HAMP-3A7C91
Object type: TOGGLE
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy artefact: possibly a toggle of Late Iron Age/early Romano-British date. The piece is of simple construction - it takes the form of a dumbbell with a central waist (5.8mm). The body to each side is faceted with the shape of a square with rounded corners for its cross-section. It is seemingly complete, with flat terminals and no evidence of breaks. The object is very slightly curved in profile. It has a mid-green smooth patina with small patches of lighter corrosion product.
Created on: Tuesday 22nd February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.

Record ID: HAMP-537873
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A damaged and incomplete Late Iron Age/Early Roman cast copper-alloy brooch, probably best classified as being of the strip bow type. The brooch has a rectangular bow (W.: 11.0mm). The head is the widest point (11.9mm) and features a central removal (pin slot) and a cylinder formed by rolling the head forward on itself, as is the case for this type. Retained within the slot, looped around the axis bar, is the head of the pin, the rest of which is otherwise missing. The flat bow is decorated with low transverse ridges. Some of these rows are decorated with circular punches. Below the b…
Created on: Wednesday 23rd February 2011
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Twyford CP', grid reference and parish protected.

Record ID: HAMP-264052
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy Colchester one-piece brooch dating to the late Iron Age to early Roman period (c. 25 - c. 60 AD), with half of the spring and pin missing. It retains its rearward facing hook at the top of the head. The tapering hook holds the external chord of the spring. On the side from which the spring emerges there are four coils, this side is complete, although the first coil is cracked by the head. The other side and the attached pin is entirely lost to old breaks. The wings are sub-rectangular and just cover the spring coil; they are 22.8mm wide in t…
Created on: Monday 23rd August 2010
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-279935
Object type: COIN
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A slightly worn 1st-century BC gold Iron Age quarter stater of the Early Uninscribed 'O' - 'Geometric' type (c. 80-60 BC; Hobbs 414ff.; VA 1225). This is a common variant of the standard O type: see, for example HAMP-D07677, CCI-96155, CCI-941047, CCI-930961, CCI-930502 on this database. The pale colour of the metal suggests this may be a contemporary copy in a silver-gold mix.
Created on: Monday 23rd August 2010
Last updated: Thursday 7th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-2AAE03
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy Colchester one-piece brooch dating to the late Iron Age to early Roman period (c. 25 - c. 60 AD). It retains its rearward facing hook at the top of the head, it is bent back on itself to meet the front of the bow and would have held the external chord. The stub of the integral spring and pin survives at the back of the head, below the hook. The wings are minimal, sub-rectangular and flat; 11.0mm wide, one appears incomplete and the other has a bent tip, curled under. The bow bends at 90 degrees just above the head, beyond this it curves back…
Created on: Monday 23rd August 2010
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-78A1A6
Object type: COIN
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A fragmentary mid/later 1st-century BC silver Iron Age unit of the Southern (Atrebatic) 'lyre' type (c. 50-20 BC; cf. CCI-91048, CCI-00445 etc.; cf. Bean type QsT1-6). The flan is slightly dished and just over half of the original coin has been lost following two main breaks.
Created on: Wednesday 8th September 2010
Last updated: Thursday 7th October 2010
Spatial data recorded.

Record ID: HAMP-F35F71
Object type: VESSEL
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A rim sherd from a later Iron Age coarseware jar dating from approximately 300 BC - AD 100. The jar has a slightly outward turned rim with a flat top and rounded outer edge. Below the short rim the body curved outwards at c.45 degrees. Not enough of the rim remains to estimate the diameter as it is slightly irregular but it indicates a large vessel. The relatively hard fired fabric is only slightly scratched by a finger nail and has a mid-brown core and a dark-brown to black surface with burnishing on the outer side and rim. The fabric has abundant (c.25%) angular flint temper of c. 2…
Created on: Friday 8th October 2010
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-962B77
Object type: COIN
Broad period: IRON AGE
County: Bedford
Workflow stage: Awaiting validation
A 1st-century BC gold Iron Age 'X box' quarter stater of Addedomaros of the Catuvellauni/Trinovantes (c. 45 - c. 25 BC; Van Arsdell 1638; Hobbs 2422-2423)
Created on: Saturday 4th June 2011
Last updated: Tuesday 7th June 2011
Spatial data recorded.

Record ID: HAMP-4207E2
Object type: BROOCH
Broad period: IRON AGE
County: Hampshire
Workflow stage: Published
A corroded and incomplete cast copper-alloy Colchester one-piece brooch of Late Iron Age or early Roman date (1st century AD). At the head, the wings are plain flat rectangular pieces with rounded outer ends (18.0mm in total width). From the centre of the underside of the head projects an upper bar which is bent round on itself to meet the front of the bow creating a loop to hold the external chord; this is flat to the bow beyond the chord. Below the bar starts the integral spring. The spring has four coils on the left side (head uppermost), the end one of which continues into the ext…
Created on: Monday 18th July 2011
Last updated: Monday 18th July 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-9A8A71
Object type: HARNESS FITTING
Broad period: IRON AGE
County: Hampshire
Workflow stage: Awaiting validation
A fragment of a corroded, cast copper-alloy terret (rein guide) dating from the late Iron Age or early Roman periods. This comprises around half of the hoop, and has been broken at the junction of hoop and bar, and the middle of the central pair of back-to-back sub-hemispherical lipped protrusions, respectively. The collar at the junction of hoop and bar is broadly sub-oval: 11.9 by 10.8mm. Vestiges of the bar suggest that it was rectangular in cross-section with rounded corners. The oval loop is circular in cross-section. It would have featured three pairs of lipped protrusions by co…
Created on: Wednesday 3rd August 2011
Last updated: Thursday 4th August 2011
Spatial data recorded. This findspot is known as 'Fair Oak and Horton Heath CP', grid reference and parish protected.

Record ID: HAMP-D02087
Object type: COIN
Broad period: IRON AGE
County: West Sussex
Workflow stage: Awaiting validation
A mid/later 1st-century BC silver Iron Age uninscribed unit, stylistically southern, but without direct parallel (cf. BM 630; cf. ABC 863, 671; CCI 10.2878). The flan is slightly dished.
Created on: Friday 13th May 2011
Last updated: Tuesday 23rd August 2011
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.

Record ID: NARC-65BFC4
Object type: RING
Broad period: IRON AGE
Workflow stage: Awaiting validation
Copper alloy ring. The ring is circular in section. Two transverse grooves are just visible aournd the outside. It has an outer diameter of 17mm and an inner diameter of 11mm. The thickness of the ring ranges from 4mm at its thickest, to 3mm at its thinnest. Although cast copper alloy beads with similar transverse grooves are known from the Bronze Age to Roman periods, the distinct and apparently deliberate difference between the two sides may suggest this is a suspension or harness loop which has been worn through use, rather than an Iron Age bead.
Created on: Tuesday 7th September 2010
Last updated: Wednesday 8th September 2010
No spatial data available.

Record ID: NARC-ED1038
Object type: COIN
Broad period: IRON AGE
County: Northamptonshire
Workflow stage: Awaiting validation
Silver Iron Age unit. Very worn. Probably Tinnocommios. Obv: Head facing right. TINCO Rev: Eagle with wings spread standing on snake. Tincommios was joint ruler of the Atrebates kingdom, firstly with his father, Commios the Younger, and later with his younger brother, Eppilus. Tincommios chose to rule the southern sections of the kingdom, which proved to be a mistake as the town of Calleva (Silchester) under his brothers rule became recognised by the Romans as the main centre of Artebatum power. Eppilus overthrew his brother from power in BC 7, and Tincommios fled to Rome to p…
Created on: Thursday 26th November 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: PAS-4745B6
Object type: BROOCH
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Awaiting validation
A Late Iron Age/early Roman (AD20-80) copper-alloy Colchester two-piece brooch, incompletein so far as it is missing the elements of its catch-plate, and much of its pin. The wings are short, flat and rectangular. Behind the wings is a hook that curves upwards to retain the axis bar, and, above this, an integral hook curved back on itself to retain the chord. The spring mechanism survives intact, around its axis bar, the chord retained within the rearward hook. There are two coils to each side; on one side the innermost coil develops into the pin which has been truncated after only c.…
Created on: Wednesday 18th February 2015
Last updated: Thursday 19th February 2015
Spatial data recorded.