Record ID: OXON-19ABBC
Object type: STRAP END
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
Medieval (late 13th to 15th centuries) composite strap end: The strap end is a sub-rectangle in plan with one end being rounded and the other having a scalloped edge. The strap end is made up of two copper alloy sheets both of each are decorated with an inscised design. One face has a standing figure, holding a vertical staff or long sword. The figure is wear a short garment. The second plate has an inscription which is difficult to read. The surface has small patches of red copper corrosion, and an incomplete mid grey-green patina. The plates are rivet together by a single copper all…
Created on: Monday 9th August 2021
Last updated: Tuesday 26th October 2021
Spatial data recorded.

Record ID: SWYOR-C0D17C
Object type: COIN
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy artefact, probably a coin of Medieval or Post Medieval date, about AD 1200 - 1500, probably of the Crusader Kingdom of Cyprus, maybe of James II dating from the late 15th century. One face bears a cross potent with a cross in each angle (the Jerusulem cross). The peripheral legend is illegible. The other face is possibly a rampant lion. The legend is again illegible, but may end GRAIA which would fit with a sizin such as that of James II (the Bastard), AD 1463 - 1473. The coin is 18.3mm in diameter and 1.4mm thick. It weighs 1.9g. Compare https://en.numista.com/cat…
Created on: Monday 12th July 2021
Last updated: Monday 13th September 2021
Spatial data recorded.

Record ID: WMID-D20A5A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete copper alloy farthing token of 17th Century dating, issued by John Dickins in Chipping Campden, Gloucestershire in 1657. C.f. Williamson, 1889, p 242, no Gloucestershire 025. Obverse: Possibly the Draper's Arms Obverse inscription: IOHN D[ ]S Reverse: Initials I D Reverse Inscription: [ ]C[ ]EN 1657 Diameter: 16.4 mm Thickness: 0.9 mm Weight: 1.0 g
Created on: Thursday 13th May 2021
Last updated: Monday 22nd November 2021
Spatial data recorded.

Record ID: LVPL-3F1FEA
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Leeds
Workflow stage: Awaiting validation
A post medieval copper alloy trade token penny issued by Edward Massey in Leeds (Williamson Yorkshire 203), dating to 1669. Obverse illegible, inscription: EDWARD . MASSEY Reverse: GROCER . IN . LEEDES // HIS / PENNY / 1669 The token has a bend running diagonally across the obverse. Dimensions: Diameter 23mm; weight 1.95g
Created on: Thursday 6th May 2021
Last updated: Thursday 6th May 2021
Spatial data recorded. This findspot is known as 'Walton', grid reference and parish protected.

Record ID: BERK-EFC7E5
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
17th century traders token from Great Eastcheap. Williamson London 1260. Obverse: [WILLIAM . TEW . AT] . THE . IN = A unicorn. Reverse: [GREA]T . EA[STCHIP . M]EAL[MAN] = T over W . B arranged as a triad
Created on: Tuesday 20th October 2020
Last updated: Wednesday 21st October 2020
Spatial data recorded.

Record ID: SOM-7B7446
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A Medieval cast copper-alloy pedestal type seal matrix dating to the 14th century. The matrix face is sub-circular. The pedestal is faceted with six facets and thins as it rises before it widens slightly to a collar topped by a rounded terminal. Below the collar is an incised transverse groove that emphasises the collar. Above the collar there is a flattened crescent, ends upwards, within which the terminal sits. The rounded terminal is flat with a circular piercing through it. The pedestal has areas of abrasion and a few chips in it but no clear marks which indicate the orientation o…
Created on: Tuesday 10th March 2020
Last updated: Monday 23rd March 2020
Spatial data recorded. This findspot is known as 'Tarrant Keyneston CP', grid reference and parish protected.

Record ID: SWYOR-632F74
Object type: PLAQUE
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Published
An enamelled copper alloy disc or plaque, decorated with a picture of a woman's face and a incomplete border of pale blue enamel with the remains of some gilding. It is probably of Medieval date, about AD 1100 - 1300, based on the similarity of style to Limoges and Mosan champlevé enamel work of that period. The human head is forward facing and is enamelled in white with metal defining the eyes and nose. There is blue enamel in the eyes and red for the mouth and ears/earrings, neither of which are bordered by metal. The hair or headdress is shown as a series of five curved lines…
Created on: Monday 9th March 2020
Last updated: Thursday 15th July 2021
Spatial data recorded.

• 

  Image not taken

Record ID: SOM-61DE2D
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy nummus of Theodora dating to AD 337-341 (Reece period 17). PIETAS ROMANA reverse type, depicting Pietas with two infants. Mint of Trier.
Created on: Monday 9th March 2020
Last updated: Monday 9th March 2020
Spatial data recorded. This findspot is known as 'Ashcott', grid reference and parish protected.

Record ID: SOM-381B46
Object type: FIGURINE
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy figurine depicting the god Mars. The figurine shows a standing male with an helmet and short tunic. He has got a crest projecting out of the helmet c.1.4 mm in high and c.2.68mm in width. The crest runs along the centre across the top from his forehead and down the back of the helmet ending just before the neck, the crest is very worn and originally more prominent. The whole head measures 19.33 mm in length. Its face has got two indented circular eyes which may have held enamel or glass beads. The lower jaw and mouth area project slightly forward. Wear in this area …
Created on: Saturday 7th March 2020
Last updated: Saturday 7th March 2020
Spatial data recorded. This findspot is known as 'Chard', grid reference and parish protected.

Record ID: SOM-E41828
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Part of a Post Medieval copper alloy double loop oval buckle dating from c AD1500-1650. One loop is missing at an old, worn break. The central strap bar is narrowed with a small moulded knop at either end. The pin is missing. The front of the frame has bevelled edges and the back is flat and undecorated. The piece has a brown patina. It measures 25.9mm in length,1 9.3mm in width, 2.5mm in thickness and weighs 2.94g. Whitehead (2003:52) states that this type of double loop buckle is extremely common and has been found in dated contexts from the mid 14th to the late 17th century. H…
Created on: Tuesday 3rd March 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-53AE77
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A small, complete Medieval to Post Medieval copper alloy double loop oval buckle dating to c. 1350 to 1650. The loops are oval with slightly expanded outer edges. The frame is D-shaped in cross section. The frame has bevelled inside and outside edges and there is a pin rest at each side of the frame. The pin bar is narrowed from the frame and recessed and the pin is hooked around it. The in is oval in cross section and tapers to a point. The piece has a green patina. It measures 18.40mm in length, 13.97mm in width, 1.97mm in thickness and weighs 1.29g. This style of buckle is qui…
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-516CA0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval copper alloy single loop buckle dating to c. 1250-1500. The frame is D-shaped with a narrowed but not offset strap bar. The pin is missing. The piece is corroded and the back has a rough finish. The buckle has a brown patina. It measures 21.24mm in length, 32.16mm in width, 3.10mm in thickness and weighs 5.34g. Egan (2007, 86) categorises this form as Type 1 and suggests they are focussed in the 13th to 14th century although may start earlier..
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-506118
Object type: BROOCH
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval octagonal copper alloy annular brooch with central oval aperture and eight straight outer sides dating to the period c. 1200 - 1400. The frame is flat with a pin constriction at the centre of one of the sides There is small notch in the outer edge of the frame on either side of the pin bar. An oval cross sectioned copper alloy pin survives in situ looped over the constriction at one and and terminating in a rounded point at the other. The pin is even in width throughout its length. The front of the brooch is decorated around the entire circumference with a recessed cent…
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-A865D2
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy barbarous radiate copying a coin of Postumus, Victorinus or Tetricus I, dating to AD 275-285 (Reece period 14). Possibly VIRTVS AVG reverse type depicting a soldier right with spear and shield. Mint unclear. The coin is chipped around the edges.
Created on: Monday 17th February 2020
Last updated: Monday 2nd March 2020
Spatial data recorded. This findspot is known as 'Othery', grid reference and parish protected.

• 

  Image not taken

Record ID: SOM-A6C61D
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy nummus of House of Valentinian dating to AD 364-378 (Reece period 19). GLORIA ROMANORVM reverse type depicting the Emperor standing with a standard, going right and dragging a captive. Mint of Lyons. The coin is missing c.20% to broken edges.
Created on: Monday 17th February 2020
Last updated: Monday 2nd March 2020
Spatial data recorded. This findspot is known as 'Othery', grid reference and parish protected.

Record ID: SOM-2A0B19
Object type: BRACELET
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Roman copper alloy bracelet dating to cAD 300 to 400. The bracelet is formed of a strip of copper alloy which has been bent into an irregular U-shape. One end is complete and narrows to catch and the other finishes in a straight, patinated break. The catch is formed of a hook; the hook is narrower than the main bracelet with a thin initial section then a thickened terminal which is round in plan and triangular in profile with the upper edge of the triangle slightly hooked over. The front of the bracelet is decorated with an incised line borders running parallel to both …
Created on: Tuesday 11th February 2020
Last updated: Thursday 26th March 2020
Spatial data recorded. This findspot is known as 'Box', grid reference and parish protected.

Record ID: SOM-28C2D7
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
A fragment of a Roman copper alloy brooch. Only the foot and catchplate remain. The bow thins and narrows evenly to the pointed foot. Close to the break in the bow is a small circular indentation and the foot is slightly thickened although vary narrow, with two transverse notches. The catchplate is complete with a circular hole drilled through the centre. The piece measures 29.0mm, 5.75mm in width, 3.95mm in thickness and weighs 3.63g. Without the head of the bow, the piece is difficult to assign to any one style. However the plain foot suggests it is probably from a T-shaped br…
Created on: Tuesday 11th February 2020
Last updated: Thursday 28th May 2020
Spatial data recorded. This findspot is known as 'Box', grid reference and parish protected.

Record ID: SOM-284F61
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Published
An incomplete Roman copper alloy initial T-shaped brooch probably dating to cAD 50-150. Only the lower part of the bow and catchplate remain. The top section of the remaining bow has a pattern of four evenly spaced converging incised lines which run down the bow to the start of the foot where there end in a double transverse incised line. The bow tapers further to four incised transverse lines just above the raised knop at the foot. The foot is circular in profile (seen from the base) and the upper edge is decorated with regularly spaced transverse notches. The solid catchplate is tr…
Created on: Tuesday 11th February 2020
Last updated: Sunday 26th July 2020
Spatial data recorded. This findspot is known as 'Box', grid reference and parish protected.

Record ID: LANCUM-3348AC
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
Post Medieval copper alloy token issued by a Huntingdonshire trader, John Bradly of Offord Cluny (Williamson, p337, Huntingdonshire 23). The obverse has a circumferal inscription with a now illegible St George and the Dragon in the centre. The reverse has a circumferal inscription and in the centre inside the inner border, the letter B over initials I.K arranged as a triad. Dates to c1660 AD. Obverse inscription (initial mullet) IOHN[.BRADL]Y.OF Reverse edge inscription OF[FORD.C]LV[NY.1660] Diameter 15mm and weight 0.78g.
Created on: Thursday 30th January 2020
Last updated: Wednesday 9th December 2020
Spatial data recorded. This findspot is known as 'near Cambridge', grid reference and parish protected.

Record ID: SOM-305768
Object type: BUCKLE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A copper-alloy Medieval single-looped oval frame dating to c. AD 1250-1400. The outer edge is widened into a bar with slightly rounded ends. There are narrow raised collars between the knops and the centre. The sides are convex. The inner bar is narrowed, recessed and offset with slight knops at each end. The pin is in situ and appears complete; it extends 13.5 from the bar and can rest on the wider bar. There are markings on the outer bar that may indicate a position for a pin rest (though these are not central, there is no indentation and the feature may just be due to wear). T…
Created on: Thursday 30th January 2020
Last updated: Tuesday 25th February 2020
Spatial data recorded. This findspot is known as 'Misterton CP', grid reference and parish protected.