Record ID: SUSS-693EB3
Object type: COIN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A struck silver Post Medieval escalin of Albert and Elizabeth of Austria, ruling in the Spanish Netherlands. Coin probably minted in Hertogenbosch in 1617. Obverse depicts an eagle with the shield of Austria-Burgundy on breast; legend reads: ALBERTVS [ET ELISABET] [...] [GR]ATIA. The reverse depicts the crowned shield of Albert and Elizabeth on St. Andrew's Cross; legend reads: AR-CHID.AV[S] [...]. Cf. World Coins 1600-1700, ref. KM# 47.3, page 1212. Most of these coins are undated or are later, from Brabant or Antwerp mints. However, it is suggested that coins displaying the date '16…
Created on: Tuesday 24th April 2012
Last updated: Tuesday 24th April 2012
Spatial data recorded. This findspot is known as 'Forest Row', grid reference and parish protected.

Record ID: SUSS-593350
Object type: PIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Published
A complete Post Medieval silver gilt dress pin with hollow-cast spherical head, c. 16th century AD. The pin has been drawn from a thick silver wire 2.40 mm in diameter and the shaft measures approximately 72 mm long (including the section through the head) with a 90-degree bend about one third of the length up from the point. Such bends are a common feature of these pins and it appears to be purposeful, perhaps due to use. The pin tapers gradually to a point at one end and ends flat at the other. The flat end seems to have been pushed through and soldered into a highly-decorative head…
Created on: Tuesday 17th January 2012
Last updated: Monday 20th January 2014
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.

Record ID: SUSS-4A9824
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A corroded Post Medieval copper alloy coin weight of James I (1603-1625 AD) dating from around the second coinage of 1604-19. This weight is for an eighth of a Unite (Halfcrown). The weight has M BRIT IR as a legend to the bust side and a crown with IIS:IX.D below to the reverse.
Created on: Friday 24th June 2011
Last updated: Thursday 27th October 2011
Spatial data recorded.

Record ID: SUSS-48B4B6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval cast copper alloy sword belt fitting. It is roughly foliate in form, with incised decoration forming a leaf pattern. It has a trefoil shaped terminal at one end below which it narrows before widening to rounded shoulders about a third of the way down from which it tapers to the other end where there are two lugs flanking a forward projecting hook. The hook is oval in cross section and the terminal is lost to an old break. There are two circular fixing holes containing iron corrosion, one near the trefoil terminal and one above the hook. It is 52.6mm long, 22.6mm w…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.

Record ID: SUSS-486225
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval - Modern cast lead two disc cloth seal. The disks sit one on top of the other and are joined by a tab. One had a hole in the centre and the other a projecting point which has been pushed through the hole and then stamped flat to fix them together. The tab is mostly missing from old breaks. The stamp has the initials R.W. The discs are bent and at most 27.4mm in diameter, 3.7mm thick and it weighs 14.22 grams. The simplcity of the design of initials rather than a privy mark suggests a later date, 17th-18th century (cf Egan p.84, no.234, 236 and p.86, no.242)
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.

Record ID: SUSS-474556
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post medieval cast copper alloy double loop buckle frame. The frame has two oval loops with slightly widened outer edges. The front and back are bevelled and the front is decorated with a raised rim around the inner side of the loops and raised foliate patterns (the pattern is discribed by Whitehead (see below) as vine scroll). There are traces of a black lacquer around the patten. The strap bar is narrowed and recessed. It is very bent and now 45.9mm long, 31.3mm wide, 2.8mm thick and weighs 6.34 grams. Whitehead (2003) illustrates a similar buckle (page 68, No.423) whi…
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Patching', grid reference and parish protected.

• 

  Image not taken

Record ID: SUSS-9F9103
Object type: BELL
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Three cast copper alloy spherical rumbler bells (crotals) of Post Medieval date (1600-1800 AD). The bells are all similar although one is damaged. They are spherical and compris two hemispherical domes with raised circumferential joins. The upper hemispheres are plain with two circular sound holes and a sub-square suspension loop projecting from the top. The curve of the bell continues under the loop apertures suggesting they were made using a detachable 'sprue-piece', this method was introduced in the 17th century. The lower hemispheres have a long sound slit with circular hol…
Created on: Monday 4th October 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Etchingham', grid reference and parish protected.

Record ID: SUSS-A122D3
Object type: PATTEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Iron ring for attachment to a wooden patten or sole. The ring is oval with raised terminals for attachment to each side. Both terminal have rectangular strips rising at right angles to the ring and then are bent out at right angles where they expand into attachment plates. One plate is D shaped with two iron rivets through it. The other is oval with one rivet through it and a strip extending from the opposite side of the plate to the ring which ends in an irregular end, probably an old break. The ring is rectangular in section, 93mm by 101.1mm, 8.3mm wide by 6.8mm thick; with the term…
Created on: Wednesday 22nd September 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Brightling', grid reference and parish protected.

Record ID: SUSS-3630E5
Object type: BOOK FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A hook piece from a copper alloy Post Medieval (c.1550-1750) book clasp. It is a sub-rectangular piece of copper alloy sheet, with a slightly flared attachment end. At the opposite end is a curved hook (3.6mm wide) the end of which is missing. Below this the main body of the clasp is 9.0mm in width, 9.1mm at the attachment end. At the centre of the attachment end is a perforation through the upper surface for a rivet, now missing. Towards the hook end there is stamped decoration within two fields delineated by transverse zigzag lines. Each field is filled with an 'eye' shaped object: …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.

Record ID: SUSS-360447
Object type: STRAP END
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Two copper alloy rings, formed of a double loop of square sectioned wire the ends and middle of which are attached to each other and to the top of a knop. The knop has a circular top to which the wire is attached below which is a constriction then a oval terminal. Both the loops and terminal are complete with no breaks suggesting it was suspended from another obect through the loops. It is 20.1mm long, 16.6mm wide and the wire is 1.2mm thick; it weighs 1.06 grams. It is unclear what this is from. The finder has suggested a parallel with a wire looped terminal on a Medieval …
Created on: Friday 17th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Winchester', grid reference and parish protected.

Record ID: SUSS-F746B4
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Cast copper alloy hooked clasp with openwork design. This is the hooked section of a two part clasp. The main plate is heart shaped with a trefoil opening in the centre. At the top projects a rounded knop containing the residue of an iron rivet in the centre. The lower point of the heart extends downwards and continues into a forward facing blunt hook. The top of the hook is flanked by projecting rounded knops with the residue of a second iron rivet between them. There is evidence of white metal coating, probably tinning. Length 55.3mm, width 21.7mm. Weight 8.49 grams. It is ide…
Created on: Tuesday 14th September 2010
Last updated: Friday 17th September 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.

Record ID: SUSS-F469B6
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Probably a strap fitting of cast copper alloy, bent over at one end. One end has a rectangular strip, bent over to form a crude hook; it is rectangular in section and appears complete. Below this hook is a raised collar on the front below which the object widens slightly before tapering in gradually and ending in a expanded oval knop at the foot. This lower section, the collar and below, is D shaped in section with a convex front and slightly concave back in the centre. The length is 47.5mm, the width is 8.8mm, and thickness is 3.8mm. The weight is 7.52 grams. It is probably Post m…
Created on: Tuesday 14th September 2010
Last updated: Thursday 23rd June 2011
Spatial data recorded. This findspot is known as 'Chichester district', grid reference and parish protected.

Record ID: SUSS-AFB261
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast lead circular unifaced token. The obverse of the token is decorated with the raised initials G over GF or GE. The reverse is blank. The token is 24.8mm in diameter, 2.33mm thick and weighs 6.84 grams. Tokens with simple designs were very easy to make, had a range of uses and continued in use for a long period. The arrangement of initials in this format was common in 17th century for married couples, the upper initial indicated the surname and the lower initials the husband and wives first names, suggesting this token dates to that time.
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Dallington', grid reference and parish protected.

Record ID: SUSS-AE77C5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. It is very worn but on the obverse appears to be a crown above ER enclosed within a circle. On the reverse side, which is also very worn, is an angel spearing a dragon lying at their feet. This image is enclosed within a pellet circle. This is a British made weight issued early in the reign of James I for an Angel of Elizabeth I (1558-1603). (Withers and Withers 1995: 22-3, 37 ). It is 14.2mm square by 2.9mm thick; it weighs 3.79 grams (58.5 grains). This is lighter than the weight of an Angel coin given in Withers and W…
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.

Record ID: SUSS-1B8B22
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval seventeenth century traders token farthing of unclear trader and town, 1648-1672 AD
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

• 

  Image not taken

Record ID: SUSS-1B0E41
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post medieval copper alloy farthing of Charles I (1625-1649), Rose Farthing Type 2, initial mark unclear, 1636-1644 AD, North 2291.
Created on: Monday 5th July 2010
Last updated: Monday 5th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

Record ID: SUSS-1AB834
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post medieval silver halfgroat of Charles I (1625-1649), Group D, Fourth bust, initial mark tun, 1636-1638 AD, North 2257
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

Record ID: SUSS-1A84C1
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post medieval silver groat of Mary I (1553-1554), initial mark pomegranate, 1553-4 AD, North 1960
Created on: Monday 5th July 2010
Last updated: Monday 12th July 2010
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

Record ID: SUSS-865322
Object type: BUTTON
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast copper-alloy front of a composite hollow button. The front is hemispherical with a central pellet at the top surrounded by an incised design of a star or sun with a cenral circle with eight rays or points projecting from it and multiple parallel lines of hatching between each ray. It is 13.7mm in diameter; 6.1mm tall and weighs 2.17 grams. An identical example is illustrated in Read (2005:73, no.294) from south Somerset which he dates to the 17th to 18th century AD.
Created on: Monday 28th June 2010
Last updated: Tuesday 6th July 2010
Spatial data recorded.

Record ID: SUSS-25F306
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval cast lead-alloy uni-face circular token, 1500-1850 AD. The token has the raised initials TP on one side. The reverse appears to have a raised pellet towards one edge but this could possibly be a casting flaw. The token measures 18.2 mm in diameter, 1.9 mm thick, and weighs 3.84 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date.
Created on: Friday 11th June 2010
Last updated: Saturday 12th June 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.