Record ID: BUC-E91DE3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
A 17th-century copper-alloy trade token farthing issued by grocer William Warre of Baldock, Hertfordshire, AD 1648-1672 (Williamson (Hertfordshire) 16)
Created on: Friday 5th October 2012
Last updated: Tuesday 5th November 2013
Spatial data recorded. This findspot is known as 'Letchworth Garden City', grid reference and parish protected.

Record ID: SOM-AF45E4
Object type: JETTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy jetton issued by Cornelius Lauffer (master 1656-1711), English style Charles I type, minted at Nuremberg, AD 1660-1685, Mitchiner (1988:501) no.1781. The jetton is slightly bent and has been pierced near the edge with a circular hole punched through from the obverse side at around 3 o'clock on the obverse and reverse.
Created on: Tuesday 2nd October 2012
Last updated: Tuesday 2nd October 2012
Spatial data recorded.

Record ID: HESH-B31D41
Object type: COIN
Broad period: POST MEDIEVAL
County: Telford and Wrekin
Workflow stage: Awaiting validation
Shilling of Charles I ' Declaration Type' struck 1642 at the mint in Oxford. Several edges of the coin have been clipped and there are a number of scratches from abrasion in the soil and worn patches from use. References North: 2439 Seaby 2971
Created on: Thursday 20th September 2012
Last updated: Monday 20th May 2013
Spatial data recorded. This findspot is known as 'Newport', grid reference and parish protected.

Record ID: CORN-4A7DC7
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Cast copper alloy finger ring with the hoop in the form of a belt strap and buckle. The miniature belt buckle is at one end of the hoop, and the belt strap runs through the buckle with two circular knops, one representing the pin, and a transverse ridge, like a miniature belt stud, on this end of the strap. This end of the strap then sits proud of the rest of the hoop, about 2 mm above it; the bare end of the strap then overlaps the round at a slight angle. The buckle is a single loop with a recessed outer edge. The strap itself has a relief inscription in roman lettering: MATER+DEI+M…
Created on: Monday 3rd September 2012
Last updated: Friday 14th September 2012
Spatial data recorded.

Record ID: HAMP-48E7D2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete cast lead-alloy token of post-medieval date, probably unifacial with a quatrefoil (Powell type 1) clear on one side. This token appears to have been deliberately cut.
Created on: Monday 3rd September 2012
Last updated: Wednesday 5th September 2012
Spatial data recorded.

Record ID: HAMP-48D1C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A broken and incomplete cast lead-alloy token of post-medieval date with a initial 'A' (Powell type 2) on one side, and initials ?'I' on the other (Powell type 2)
Created on: Monday 3rd September 2012
Last updated: Thursday 2nd January 2014
Spatial data recorded.

Record ID: HAMP-5344F5
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, slightly bent 17th-century copper-alloy post-medieval Scottish twopence (Turner) of Charles I, Earl of Stirling coinage, uncertain mint (AD 1632-1639; Spink 5599)
Created on: Friday 10th August 2012
Last updated: Wednesday 22nd August 2012
Spatial data recorded.

Record ID: WILT-1CA621
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete early Post-medieval copper-alloy eye section from a toggle clasp. The section is comprised of a circular 'eye' containing an irregular, but roughly cross shaped aperture. A circular loop and an incomplete plate extends from one side of the eye. The artefact has been bent.
Created on: Wednesday 20th June 2012
Last updated: Monday 5th March 2018
Spatial data recorded.

Record ID: WILT-0814B7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A cast copper-alloy double-looped buckle frame of medieval to early post-medieval date. The frame is formed of two conjoined ovals such that the sides incurve. The frame is bevelled both internally and externally on the upper surface, the latter more shallowly; the lower surface is flat. The pin bar thus has a trapezoidal cross-section, it is bent upwards slightly. The pin is missing.
Created on: Tuesday 19th June 2012
Last updated: Tuesday 19th June 2012
Spatial data recorded.

Record ID: WILT-0765B2
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete copper-alloy Post-medieval button. The button is hollow, undecorated. It is circular in plan and D shape in cross section. The reverse is flat. A complete looped shank is attached on the flat reverse.
Created on: Tuesday 19th June 2012
Last updated: Tuesday 19th June 2012
Spatial data recorded.

Record ID: WILT-0736E4
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A post-medieval/modern gunflint from a flintlock musket. The flint is broadly rectangular in plan. The ventral surface is smooth and relatively flat; the strikes come in at an angle; the bulb of percussion is absent. The dorsal face is bevelled on all sides. The flint has a white patina. The flintlock was introduced in the middle of the 16th century but it was not until the reign of William III that the flintlock became the main regulation firearm for the British Army. The knapped flint was used within the musket mechanism to produce a spark and would last between 20-25 shots bef…
Created on: Tuesday 19th June 2012
Last updated: Tuesday 19th June 2012
Spatial data recorded.

Record ID: WILT-0496D1
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Post-medieval double loop buckle. The buckle has small projecting lobes at either end of the strap bar. There are slight nitches at either end of the D shaped loops to act as a pin rest, the pin is missing.
Created on: Tuesday 19th June 2012
Last updated: Tuesday 19th June 2012
Spatial data recorded.

Record ID: WILT-043C22
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Post-medieval hooked sword belt fitting dating to the 16th - 17th centuries. The hook is missing due to old breaks, there are two iron rivets which are located on the main body of the fitting.
Created on: Tuesday 19th June 2012
Last updated: Tuesday 19th June 2012
Spatial data recorded.

Record ID: WILT-B61407
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper-alloy Post-medieval sheet rivet which would have been used to hold repairs to a vessel in place. The artefact is broadly rectangular in form. It have been folded in on themselves from the sides before being folded back, the folds protruding beyond the side.
Created on: Friday 15th June 2012
Last updated: Friday 15th June 2012
Spatial data recorded.

Record ID: WILT-B583C2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A copper-alloy sexfoil mount of Post-medieval date with two spikes on the reverse.
Created on: Friday 15th June 2012
Last updated: Wednesday 20th June 2012
Spatial data recorded.

Record ID: WILT-608CE5
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete probably Post-Medieval (1500-1700) openwork probable strap distributor with domed centre boss. It is missing just less than half. Measures 29.28x29.04x8.13mm and weighs 6.7g. The plate around the centre boss (c.12mm diameter) is more or less circular in shape with an oval perforation in each quarter (although only two of these remain intact). Between each quarter protrudes a semi-circular lug (again, only two survive) with a rivet hole c.3mm in diameter just below (three rivet holes survive). The plate is flat (2.68mm thick) though hollowed to the reverse behind the ce…
Created on: Wednesday 30th May 2012
Last updated: Thursday 16th August 2012
Spatial data recorded. This findspot is known as 'Warminster', grid reference and parish protected.

Record ID: WILT-E26F35
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval farthing trade token possibly of Richard Wootten. It measures 15.3mm in diameter, is 1.0mm thick and weighs 0.85 grams Obverse: (mullet) R . W (mullet) RICHARD WOOTTEN? Reverse: IIndiscernible IN [...] 1666 [...]
Created on: Thursday 24th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-E1E1D0
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval farthing trade token of Jeremiah Sloper, Marlbrough. It measures 15.2mm in diameter, is 0.5mm thick and weighs 0.58 grams Obverse: A sugar loaf [IEREMI]AH . SLOPER Reverse: I . E . S IN MALBROVGH Reference: Williamson, Wiltshire p. 1241 no 145
Created on: Thursday 24th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: SOM-CB6026
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post medieval cast copper alloy toy cannon. The muzzle (open end) of the cannon is missing to an old break. It is cast in one piece with a pronounced base ring and a plain tapering breech. The cascabel is also missing to an old break. The small vent hole, blocked with mud, is half way between the base ring and first reinforce ring. The barrel is corroded but appears to have recessed rings either side of the trunnions. The trunnions are circular in section, both are missing their ends, one is just a stub. The total width of the cannon across the trunnions is 16.1mm. Between the first a…
Created on: Wednesday 23rd May 2012
Last updated: Wednesday 23rd May 2012
Spatial data recorded. This findspot is known as 'St Cuthbert Out CP', grid reference and parish protected.

Record ID: SOM-CAEBF0
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper-alloy double-loop buckle frame. The loops are D shaped in plan and trapezoidal in section with angled sides and wider back. From the centre of the outer edges of each loop projects a tri-lobed extension. The extension is stamped with an annulet in the centre with eight grooves projecting away from it, two grooves in each direction. There are smaller rounded knops projecting at each corner of the frame. The narrow strap bar is tringular in section and recessed from the frame with a lobed knop at each end. The pin is missing but there is a lump of iron corrosion on …
Created on: Wednesday 23rd May 2012
Last updated: Wednesday 23rd May 2012
Spatial data recorded. This findspot is known as 'St Cuthbert Out CP', grid reference and parish protected.