Record ID: HAMP-AB3643
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete early 16th-century silver post-medieval groat of Henry VII, London mint (1505-1509 AD; North 1747). This coin has been bent and has suffered circumferential cracks and losses.
Created on: Monday 24th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Boldre CP', grid reference and parish protected.

Record ID: HAMP-37EDB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded, plain copper-alloy rivet-like object which might have been used to hold repairs to a vessel in place. It is sub-oval in plan with a possibly break giving a broadly straight edge to one side. On the lower surface there is an integral protruding prong towards this edge whose terminal protrudes to one side and is flattened at the base. Rolled sheet rivets replaced the earlier folded sheet rivets in pot repairs from the late 15th - 16th centuries (Egan 2005, 101) suggesting a possible late medieval to post-medieval date for this piece. It is of a red-brown metal with patches o…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Headbourne Worthy CP', grid reference and parish protected.

Record ID: BERK-621BE7
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp that retains an iron rivet, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.

Record ID: BERK-624D97
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment in the centre of t…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.

Record ID: HAMP-CCA317
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, clipped and bent 16th-century silver post-medieval coin: possibly a halfgroat of Elizabeth I struck at London (c. 1583 - c. 1603 AD; possibly North 2016). This coin has suffered some circumferential losses.
Created on: Monday 6th December 2010
Last updated: Tuesday 7th December 2010
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP-815D50
Object type: SHOT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded small lead-alloy ball with attached sprue: shot of post-medieval date. The sprue extends for 2.9mm at a diameter of 5.7mm before expanding to 6.6mm at the point of break. The sphere is small enough to be pistol shot.
Created on: Tuesday 1st February 2011
Last updated: Tuesday 1st February 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.

Record ID: HAMP-2BEC46
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded fragment from a cast copper-alloy hooked mount of post-medieval date. The fragment consists of the lower part of the mount, including the hook and the lower part below a rivet hole. Within this lower rivet hole corroded remains of an iron rivet. The sides of the mount are scalloped with rounded protrusions to the sides. The inward-turning hook has been bent slightly to one side as a result of old damage. The metal has corroded to a red-brown colour with larges areas of light-green and off-white corrosion product.
Created on: Monday 21st February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.

Record ID: HAMP-CE5F95
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete cast lead cloth (alnage) seal of post-medieval date. Only one of the possible pair (or more) of discs survives. In low relief it is inscribed with the following lettering: '4 (inverted)? II//I M'. The other surface is plain. The angular sides of the seal suggest that it may have been cut deliberately.
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Overton CP', grid reference and parish protected.

Record ID: HAMP-D002C5
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete sub-rectangular cast copper-alloy mount of post-medieval date. The object is flat with a main rectangular body which incurves at one end to a width of 4.4mm before an old break; it appears to be truncated at the other end due to old damage. Before the end narrows there is a pair of double transverse grooves on the upper surface between which possible decoration within a rectangular field now obscured by corrosion. The main body beyond has grooves running just inside the long edges. The field within appears plain, again perhaps a product of corrosion, apar…
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Broughton CP', grid reference and parish protected.

Record ID: HAMP-5EB3E0
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy post-medieval plain double-looped buckle frame. The frame is missing one of its loops after an old break at the pin bar. The surviving loop is trapezoidal, with a flat lower surface and an upper surface which is bevelled externally. This gives the frame a triangular cross-section, while the pin bar is semi-circular in section. There is a knopped protrusion at each end of the pin bar. Traces of orange corrosion product at one end of the pin bar suggest that the pin may have been made of iron. The frame has a dark-grey surface where it survive…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5EF961
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy double-looped buckle frame of medieval to early post-medieval date. The frame was formed of two conjoined ovals such that the sides incurve. The frame is bevelled both internally and externally on the upper surface, the latter more shallowly; the lower surface is flat. The pin bar thus has a trapezoidal cross-section. The pin is now largely missing, apart from the orange/brown corroded mass, the remnant of the iron pin. The buckle frame has a variable mid-green colour but is mostly covered in off-white corrosion product. Buckles of this size…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5FC754
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy hooked mount of post-medieval date. The mount is sub-trapezoidal in plan with a cusped upper edge. It tapers towards the hook (now missing), widening slightly just above the hook; the mount has broken as the hook begins. The mount is broadly flat with slight bevelling on its upper surface. It features two iron rivets, one towards the upper edge, the other just below the centre of the plate. Much of the upper rivet survives corroded in place. The copper alloy is covered in an off-white corrosion product over a mid-green metal. Comparable hook…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP-F2CC91
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast lead pot mend, used to mend a broken vessel in order to lengthen the period of use after damage had occurred. It is sub-circular and slightly curved in profile, with the section above the slot slightly misaligned to that below. The vessel is also curved and c. 3.5mm thick. Its dark orange-brown colour suggests that this is a corroded iron cooking vessel, of early post-medieval date.
Created on: Friday 8th April 2011
Last updated: Tuesday 12th April 2011
Spatial data recorded. This findspot is known as 'Bishops Waltham CP', grid reference and parish protected.

Record ID: SUR-D13AD4
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A trader's token issued by William Joyce of Salisbury WILLIAM IOYCE/ A camel couchant IN SARVM 1652/ W I
Created on: Wednesday 26th May 2010
Last updated: Wednesday 26th May 2010
Spatial data recorded.

Record ID: HAMP-4BBF70
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and clipped early 17th-century base silver post-medieval Irish sixpence of Elizabeth I, 3rd (base) coinage (1601-1602 AD; Spink 6508). This coin has been pierced through the reverse, probably for re-use as a jewellery item; the piercing is just within the inner circle. It is at around 3 o'clock on the obverse and around 9 o'clock on the reverse.
Created on: Friday 25th June 2010
Last updated: Monday 12th July 2010
Spatial data recorded.

Record ID: HAMP-EA5603
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued in Andover for the benefit of the disabled poor in 1666 (Williamson 14)
Created on: Friday 20th August 2010
Last updated: Tuesday 27th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.

Record ID: HAMP-EAB442
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, corroded and slightly bent 17th-century copper-alloy post-medieval token farthing issued by the Winchester grocer William Butler in 1657 AD (Williamson 214). Around a quarter of the flan has been lost due to old breaks in different places at the circumference.
Created on: Friday 20th August 2010
Last updated: Wednesday 28th September 2011
Spatial data recorded. This findspot is known as 'Owslebury CP', grid reference and parish protected.

Record ID: HAMP-25E8B3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy post-medieval shoe or knee buckle. The buckle is rectangular in plan with rounded corners. It is bevelled externally on the upper surface and rabetted at the outer edge. The bevelling is echoed internally on the lower surface. There is a elongated 'C'-shaped moulding on the upper surface along the longer sides and extending into the internal side of the outer edge, terminating in a curl. Central expansions on the longer sides have been drilled to take the separate pin bar. This latter survives in situ; being made of iron it is highly corroded. There a…
Created on: Monday 23rd August 2010
Last updated: Wednesday 12th January 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.

Record ID: HAMP-25F3B2
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy spherical animal ('crotal') bell of post-medieval date (c. 17th century AD). The sub-rectangular suspension loop at the top is 6.9mm in length. The curve of the bell continues under the loop suggesting it was made using the detachable sprue-piece method developed in the 17th century. The upper and lower hemispheres are divided by a prominent horizontal circumferential rib. At either side of the suspension loop, about halfway down the side of the upper hemisphere, is a circular sound hole. Across the lower hemisphere is a rectangular sound slot opening into a circul…
Created on: Monday 23rd August 2010
Last updated: Wednesday 16th November 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: HAMP-260461
Object type: BELL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A complete cast copper-alloy cast spherical bell of post-medieval date (c.1500-1650 AD). The bell is spherical and comprises two hemispherical domes with a raised circumferential join. The top hemisphere has two circular sound holes and a square suspension loop with drilled circular hole projecting from the top. The hole was drilled later into the solid cast loop suggesting it was made before the introduction of the detachable 'sprue-piece' method in the mid-17th century. The lower side of this drilled hole has broken or worn through the top of the bell leaving a slot. The lower hemis…
Created on: Monday 23rd August 2010
Last updated: Tuesday 14th June 2016
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.