Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: broadperiod
    • Broad period: POST MEDIEVAL
    • Workflow: Record ready for publication
    • Primary material: Copper alloy

  • Thumbnail image of WMID-E076D4

Record ID: WMID-E076D4
Object type: SPOON
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy spoon finial (length: 34mm; width at shoulders of blade: 13mm; thickness at shoulders of blade: 3mm; weight: 3.03g). Intregrally cast with the blade, the small handle/ end knob (length: 7mm) has bead, reel and spool mouldings. The blade tapers fairly gently from shoulders to the blade where the forked tip has been broken off to form a jagged edge. The front of the blade has been engraved/ incised with possible animal motifs. This decoration, however, is fairly crude and mostly consists of unidentifiable linear markings. The overall condition of the artefact is fai…
Created on: Friday 21st May 2004
Last updated: Monday 27th February 2017
Spatial data recorded.


  • Thumbnail image of SUSS-E3FC95

Record ID: SUSS-E3FC95
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Loop part of a two part cast copper alloy dress fastener of Post-Medieval, seventeenth century date (AD 1600 - AD 1700). The fastener is flat and piriform (drop shaped) in plan with an integral loop at the wider end; the loop is broken on the outer edge and the inner edge curves down on each side to meet at a centre point, flanking this point the border on the main plate curls inwards, continuing the curves. At the widest point there are integral perforated knops, one each side, which would have been used to sew the clasp onto clothing, one is broken. The end opposite the loop is brok…
Created on: Thursday 12th April 2007
Last updated: Thursday 2nd November 2017
Spatial data recorded. This findspot is known as 'Willingdon & Jevington', grid reference and parish protected.


  • Thumbnail image of SUSS-007854

Record ID: SUSS-007854
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, rounded edge. There are three circular-headed rivets on the underside of this curved edge. The rivets can also be seen on the front surface. The front surface is covered with an incised decoration. There is a parallel set of lines running up from the straight edge of the plate. Inside these lines there are three bands of cross-hatched lines, inside borders. Also curving away …
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.


  • Thumbnail image of SUSS-007DB8

Record ID: SUSS-007DB8
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, trilobite edge. There are four circular-headed rivets on the upper side of this curved edge. The rivets can also be seen on the reverse. The front surface is covered with an embossed decoration. There are three bands of parallel lines running parallel with the straight edge. At the end of this design there is a design resembling a draped pair of curtains, tied at the top. Eit…
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.


  • Thumbnail image of SUSS-E22D75

Record ID: SUSS-E22D75
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of James I, Type 3d (Lennox round), initial mark possibly a tun, 1614-1625 AD, North 2136. Reverse struck off centre.
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-E2BF63

Record ID: SUSS-E2BF63
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of Charles II, 1672 AD
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-FC6B57

Record ID: SUSS-FC6B57
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy post medieval double loop buckle frame. 28.3mm long, 27.1mm wide, 2.5mm thick and 3.4 grams in weight. One loop has gone almost completely from old breaks. The other is D shaped in profile with an expanded outer edge and a central pair of projecting lips forming a pin rest. The centre bar is recessed and narrowed, there are projecting knobs at both ends, outlined by grooves across the frame. Similar to Whitehead (2003) page 61, no 306 hence a date of c.1550-1650 is suggested.
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-FCC538

Record ID: SUSS-FCC538
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy post medieval rectangular shoe buckle with seperate spindle. 17.5mm long, 13.1mm wide, 3.5mm thick and 2.2 grams in weight. The frame is rectangular and slightly curved upwards, with outer sides that expand inwards slightly, these widened areas have no visible pin rests but the triangular pin is still cemented to one of them. The sides are also widened inwards and thickened at the centre to hold the spindle. The iron spindle is still in place, although rusted. The pin is complete, trianguler, 8.8mm long and 2.8mm wide at the base. The chape is incomplete; it is attach…
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-0D7B32

Record ID: SUSS-0D7B32
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of William III (1694-1702), 1696 issue.
Created on: Friday 18th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of NLM-1F6464

Record ID: NLM-1F6464
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy clasp, probably a sword belt fitting. It has a circular terminal, which is attached to the tongue shaped bar by an integral neck. The tongue shaped bar consists of two hollow knobs with transverse ribs either side. One of the knobs retains part of an iron rivet. The body terminates with a small hollow lobe with a solid knob. The lobe retains an iron rivet. The back is flat and has iron corrosion behind the rivets. The length is 44.3mm, the width is 10.0mm and the weight is 5.19g. Laura Burnett kindly wrote on the 8th August 2010: 'Is this one of the one…
Created on: Thursday 4th August 2005
Last updated: Monday 12th February 2018
Spatial data recorded. This findspot is known as 'West Rasen', grid reference and parish protected.


  • Thumbnail image of HAMP-F51624

Record ID: HAMP-F51624
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly bent and highly corroded copper-alloy post-medieval trader's token farthing, issued by Romsey grocer Isaac Knight in 1664 AD (Williamson 174). This token has suffered a loss to its circumference.
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-4989D3

Record ID: HAMP-4989D3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment from a cast copper-alloy post-medieval buckle, probably a shoe buckle: it bowes. The frame would have been rectangular with rounded corners; less than half of the buckle remains. The pin, now missing, would have been joined to the frame at two centrally drilled holes along its width; half of one of the holes is present on the fragment. The frame is raised around the spindle hole. The buckle is moulded on its upper surface, with a slightly rebated border. In each internal corner is an arc that terminates in a circle within which a punched ring-and-dot motif. The circles prot…
Created on: Monday 20th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-4E2F84

Record ID: HAMP-4E2F84
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy double-looped buckle of post-medieval date, now missing its pin. The buckle is sub-rectangular in form, effectively a rectangle with the corners cut off; one of the outer edges is not straight. The buckle is flat and plain and has corroded to a red-brown colour overlain by patches of light green corrosion product. Such a buckle can plausibly be dated to the 17th century, although a slightly later date cannot be ruled out (cf. Griffiths et al., 215; ref. 3001).
Created on: Friday 26th June 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Child Okeford CP', grid reference and parish protected.


  • Thumbnail image of SOM-4B5883

Record ID: SOM-4B5883
Object type: KNIFE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy side plate from the hilt of a knife. The plate is sub-rectangular in shape. There is a break at one end, but the rest of the plate remains intact and in fairly good condition. The reverse has a raised ridge running along the outside edge, creating a central slot to hoild the tang of the knife, but is otherwise undecorated. The upper face has a central recessed panel with raised letters within it. These are difficult to decipher and this task is made more difficult because the first part of the inscription is missing due to the break. They appear to say [...]MAKE YOUr…
Created on: Friday 26th June 2009
Last updated: Wednesday 16th November 2016
Spatial data recorded. This findspot is known as 'Holford', grid reference and parish protected.


  • Thumbnail image of WILT-1CA621

Record ID: WILT-1CA621
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete early Post-medieval copper-alloy eye section from a toggle clasp. The section is comprised of a circular 'eye' containing an irregular, but roughly cross shaped aperture. A circular loop and an incomplete plate extends from one side of the eye. The artefact has been bent.
Created on: Wednesday 20th June 2012
Last updated: Monday 5th March 2018
Spatial data recorded.


  • Thumbnail image of KENT-6A9D54

Record ID: KENT-6A9D54
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
One part of a Post Medieval two part toggle clasp, see Read (2008) Hooked Clasps and Eyes p.209 no.757. Cast copper alloy with an iron rivet.
Created on: Monday 18th December 2006
Last updated: Tuesday 28th June 2011
Spatial data recorded.


  • Image not taken

Record ID: DEV-B9F734
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation Find awaiting validation
Post medieval copper alloy halfpenny token issued by unknown issuer (I G possibly John Geyre) at Okehampton, Devon in 1657 or 1658. Williamson Devon 226 or 226A.
Created on: Monday 15th January 2007
Last updated: Monday 29th January 2018
Spatial data recorded. This findspot is known as 'Barnstaple', grid reference and parish protected.


  • Thumbnail image of LANCUM-D55A16

Record ID: LANCUM-D55A16
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation Find awaiting validation
Cast cu-alloy coin weight for an ecu au soleil (French gold denomination). It depicts a radient sun in the centre of the shield on the obverse and was issued between c. AD1475-1654. Withers suggest this form is an English type (1994, 39).
Created on: Thursday 17th February 2011
Last updated: Monday 10th April 2017
Spatial data recorded. This findspot is known as 'Mawdesley', grid reference and parish protected.


  • Thumbnail image of HAMP-2BEC46

Record ID: HAMP-2BEC46
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded fragment from a cast copper-alloy hooked mount of post-medieval date. The fragment consists of the lower part of the mount, including the hook and the lower part below a rivet hole. Within this lower rivet hole corroded remains of an iron rivet. The sides of the mount are scalloped with rounded protrusions to the sides. The inward-turning hook has been bent slightly to one side as a result of old damage. The metal has corroded to a red-brown colour with larges areas of light-green and off-white corrosion product.
Created on: Monday 21st February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.


  • Thumbnail image of SOM-3FDBB7

Record ID: SOM-3FDBB7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval, 17th century, cast copper alloy openwork mount with integral attachment spikes. The mount is flat and shaped into four lobes, two large pointed oval lobes alternating with two smaller circular lobes. The tip of one of the pointed oval lobes is lost, possibly to damage. The lobes have circular holes in the centre and there is a further hole in the centre of the mount; the holes in the pointed oval lobes join the central hole while those in the circular lobes are connected to it by an indent on the front. On the back are two integral spikes, one is complete and bent inwar…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.


1 - 20 of 210 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.