Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: broadperiod
    • Broad period: POST MEDIEVAL
    • Workflow: Record ready for publication

  • Thumbnail image of DUR-1B82E4

Record ID: DUR-1B82E4
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: Stockton-on-Tees
Workflow stage: Awaiting validation Find awaiting validation
Cast lead Post Medieval finger ring, a decade ring, dating to c.1600-1800. It is circular in plan with a projecting flat oval shaped bezel (diameter 10.60mm x 8.69mm) and ten small projecting knops around the outer circumference. The bezel is plain but on other examples there are designs and letters. This appears to be a lead version of the more usual copper alloy rings of this type. Decade rings were used for the rosary- to repeat the Ave and Paternoster prayers. They were introduced in the 10th century but became more popular at times of religious tension, in particular the 16…
Created on: Tuesday 29th March 2011
Last updated: Wednesday 30th March 2011
Spatial data recorded.


  • Thumbnail image of WMID-E076D4

Record ID: WMID-E076D4
Object type: SPOON
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper alloy spoon finial (length: 34mm; width at shoulders of blade: 13mm; thickness at shoulders of blade: 3mm; weight: 3.03g). Intregrally cast with the blade, the small handle/ end knob (length: 7mm) has bead, reel and spool mouldings. The blade tapers fairly gently from shoulders to the blade where the forked tip has been broken off to form a jagged edge. The front of the blade has been engraved/ incised with possible animal motifs. This decoration, however, is fairly crude and mostly consists of unidentifiable linear markings. The overall condition of the artefact is fai…
Created on: Friday 21st May 2004
Last updated: Monday 27th February 2017
Spatial data recorded.


  • Thumbnail image of SUSS-E3FC95

Record ID: SUSS-E3FC95
Object type: DRESS FASTENER (DRESS)
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
Loop part of a two part cast copper alloy dress fastener of Post-Medieval, seventeenth century date (AD 1600 - AD 1700). The fastener is flat and piriform (drop shaped) in plan with an integral loop at the wider end; the loop is broken on the outer edge and the inner edge curves down on each side to meet at a centre point, flanking this point the border on the main plate curls inwards, continuing the curves. At the widest point there are integral perforated knops, one each side, which would have been used to sew the clasp onto clothing, one is broken. The end opposite the loop is brok…
Created on: Thursday 12th April 2007
Last updated: Thursday 2nd November 2017
Spatial data recorded. This findspot is known as 'Willingdon & Jevington', grid reference and parish protected.


  • Thumbnail image of SUSS-007854

Record ID: SUSS-007854
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, rounded edge. There are three circular-headed rivets on the underside of this curved edge. The rivets can also be seen on the front surface. The front surface is covered with an incised decoration. There is a parallel set of lines running up from the straight edge of the plate. Inside these lines there are three bands of cross-hatched lines, inside borders. Also curving away …
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.


  • Thumbnail image of SUSS-007DB8

Record ID: SUSS-007DB8
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, trilobite edge. There are four circular-headed rivets on the upper side of this curved edge. The rivets can also be seen on the reverse. The front surface is covered with an embossed decoration. There are three bands of parallel lines running parallel with the straight edge. At the end of this design there is a design resembling a draped pair of curtains, tied at the top. Eit…
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.


  • Thumbnail image of SUSS-E18B20

Record ID: SUSS-E18B20
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Silver twopence of George I (1714-1727), minted 1727. It is generally considered these coins were all minted for the Maundy sets although many subsequently circulated as small change.
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-E22D75

Record ID: SUSS-E22D75
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of James I, Type 3d (Lennox round), initial mark possibly a tun, 1614-1625 AD, North 2136. Reverse struck off centre.
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-E27612

Record ID: SUSS-E27612
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Silver coin which has been polished until no trace of the design or legend remains. The size suggests it was origionally a post medieval three pence. Coins were polished in this way for use as love tokens but also to make small silver items such as boxes.
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-E2BF63

Record ID: SUSS-E2BF63
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of Charles II, 1672 AD
Created on: Wednesday 16th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-FC6B57

Record ID: SUSS-FC6B57
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy post medieval double loop buckle frame. 28.3mm long, 27.1mm wide, 2.5mm thick and 3.4 grams in weight. One loop has gone almost completely from old breaks. The other is D shaped in profile with an expanded outer edge and a central pair of projecting lips forming a pin rest. The centre bar is recessed and narrowed, there are projecting knobs at both ends, outlined by grooves across the frame. Similar to Whitehead (2003) page 61, no 306 hence a date of c.1550-1650 is suggested.
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-FCC538

Record ID: SUSS-FCC538
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy post medieval rectangular shoe buckle with seperate spindle. 17.5mm long, 13.1mm wide, 3.5mm thick and 2.2 grams in weight. The frame is rectangular and slightly curved upwards, with outer sides that expand inwards slightly, these widened areas have no visible pin rests but the triangular pin is still cemented to one of them. The sides are also widened inwards and thickened at the centre to hold the spindle. The iron spindle is still in place, although rusted. The pin is complete, trianguler, 8.8mm long and 2.8mm wide at the base. The chape is incomplete; it is attach…
Created on: Thursday 17th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of SUSS-0D7B32

Record ID: SUSS-0D7B32
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy farthing of William III (1694-1702), 1696 issue.
Created on: Friday 18th January 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.


  • Thumbnail image of HAMP-8024D7

Record ID: HAMP-8024D7
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
An extremely worn, bent early 17th-century silver post-medieval halfgroat of James I, second issue, London mint (c. 1605 - c. 1606 AD; North 2104)
Created on: Tuesday 2nd August 2011
Last updated: Thursday 4th August 2011
Spatial data recorded. This findspot is known as 'Otterbourne CP', grid reference and parish protected.


  • Thumbnail image of NLM-1F6464

Record ID: NLM-1F6464
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper-alloy clasp, probably a sword belt fitting. It has a circular terminal, which is attached to the tongue shaped bar by an integral neck. The tongue shaped bar consists of two hollow knobs with transverse ribs either side. One of the knobs retains part of an iron rivet. The body terminates with a small hollow lobe with a solid knob. The lobe retains an iron rivet. The back is flat and has iron corrosion behind the rivets. The length is 44.3mm, the width is 10.0mm and the weight is 5.19g. Laura Burnett kindly wrote on the 8th August 2010: 'Is this one of the one…
Created on: Thursday 4th August 2005
Last updated: Monday 12th February 2018
Spatial data recorded. This findspot is known as 'West Rasen', grid reference and parish protected.


  • Thumbnail image of HAMP-1565A7

Record ID: HAMP-1565A7
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A very worn early 17th-century silver post-medieval Irish shilling of James I, First coinage, struck in 1604 (Spink 6513). This coin has been bent twice, perhaps as a love token, and has an S-shaped profile.
Created on: Monday 18th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-226B62

Record ID: HAMP-226B62
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A corroded but complete cast lead button of post-medieval date (Th. without loop: c. 9.1mm). The button is domed, with a flat back with central, integral iron loop of circular cross-section; no casting seam is visible. The upper surface bears patterning moulded in low relief, consisting of lines and circles around a central cross, but with obvious symmetry. Read (2005, 57ff.) dates such buttons to the 16th century.
Created on: Monday 6th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tarrant Hinton CP', grid reference and parish protected.


  • Thumbnail image of HAMP-F51624

Record ID: HAMP-F51624
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A slightly bent and highly corroded copper-alloy post-medieval trader's token farthing, issued by Romsey grocer Isaac Knight in 1664 AD (Williamson 174). This token has suffered a loss to its circumference.
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-F63887

Record ID: HAMP-F63887
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A highly worn and bent later 16th-century silver post-medieval halfgroat of Elizabeth I struck at London (c. 1595 - c. 1598 AD; North 2016)
Created on: Thursday 16th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-4989D3

Record ID: HAMP-4989D3
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment from a cast copper-alloy post-medieval buckle, probably a shoe buckle: it bowes. The frame would have been rectangular with rounded corners; less than half of the buckle remains. The pin, now missing, would have been joined to the frame at two centrally drilled holes along its width; half of one of the holes is present on the fragment. The frame is raised around the spindle hole. The buckle is moulded on its upper surface, with a slightly rebated border. In each internal corner is an arc that terminates in a circle within which a punched ring-and-dot motif. The circles prot…
Created on: Monday 20th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of HAMP-1447F4

Record ID: HAMP-1447F4
Object type: COIN
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A worn, slightly bent and clipped early 17th-century post-medieval silver halfgroat of James I, second issue, London mint (1610-1611 AD; North 2105/1)
Created on: Tuesday 11th August 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 335
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 636
  • Mean quantity: 1.899
  • Maximum: 233

Filter your search

1 - 20 of 335 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.