Record ID: HAMP-CE5F95
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete cast lead cloth (alnage) seal of post-medieval date. Only one of the possible pair (or more) of discs survives. In low relief it is inscribed with the following lettering: '4 (inverted)? II//I M'. The other surface is plain. The angular sides of the seal suggest that it may have been cut deliberately.
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Overton CP', grid reference and parish protected.

Record ID: SUSS-C51D97
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A cast lead-alloy circular uni-faced token with three visible casting spruces at the cardinal points. The token has a raised design of the initial 'E' on one side, the other side is blank. It is 21.20mm in diameter, 1.85 mm thick and weighs 4.8 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date, 1500-1850 AD.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-8F56C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval cast lead alloy circular uni-faced token, 1500-1850 AD. The token has a raised design on one side of the initials J and F seperated by a raised pellet with 12 above and possibly bls (or s19 upside down) below. The reverse is blank. The token measures 19.9mm in diameter, 3.1mm thick, and weighs 7.66 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initals are thought to be Post Medieval in date. Those with 6, 12 or 24 on are often hop tokens given to piece workers to keep track of how many sacks …
Created on: Friday 4th June 2010
Last updated: Saturday 5th June 2010
Spatial data recorded. This findspot is known as 'Heathfield', grid reference and parish protected.

Record ID: SUSS-25F306
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval cast lead-alloy uni-face circular token, 1500-1850 AD. The token has the raised initials TP on one side. The reverse appears to have a raised pellet towards one edge but this could possibly be a casting flaw. The token measures 18.2 mm in diameter, 1.9 mm thick, and weighs 3.84 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date.
Created on: Friday 11th June 2010
Last updated: Saturday 12th June 2010
Spatial data recorded. This findspot is known as 'Near Chichester', grid reference and parish protected.

Record ID: SUSS-AFB261
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast lead circular unifaced token. The obverse of the token is decorated with the raised initials G over GF or GE. The reverse is blank. The token is 24.8mm in diameter, 2.33mm thick and weighs 6.84 grams. Tokens with simple designs were very easy to make, had a range of uses and continued in use for a long period. The arrangement of initials in this format was common in 17th century for married couples, the upper initial indicated the surname and the lower initials the husband and wives first names, suggesting this token dates to that time.
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Dallington', grid reference and parish protected.

• 

  Image not taken

Record ID: HAMP-2900A2
Object type: MUSKET BALL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded cast lead-alloy musket ball of post-medieval date. It is generally spherical with slight casting seam and a projecting circular sectioned sprue on one side. Ball shot generally dates from after 1644, and most are late 17th/18th century in date.
Created on: Monday 23rd August 2010
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Bighton CP', grid reference and parish protected.

Record ID: SOM-D7E1B2
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A probable lead alloy fragment of a Post Medieval to Modern toy gun. The object is triangular in plan with curving sides and a flattened point. The point end is closed but the opposite end is open and was probably attached to the wooden section of the toy gun. Both faces have moulded decoration showing what appears to be leaves and/or flowers within a border of raised lines. There is a lobed knop projecting down from one of the sides. It is likely to be the butt from a toy gun. It measures 52.4mm in length, 26.7mm in width, 11.8mm in thickness and weighs 30.4g.
Created on: Thursday 6th October 2011
Last updated: Wednesday 15th February 2012
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: HAMP-48D1C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A broken and incomplete cast lead-alloy token of post-medieval date with a initial 'A' (Powell type 2) on one side, and initials ?'I' on the other (Powell type 2)
Created on: Monday 3rd September 2012
Last updated: Thursday 2nd January 2014
Spatial data recorded.

Record ID: SOM-93DA36
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval lead cloth seal, of two disk type. Only one disk now survives with the projecting attachment on the back. The second disk and connecting strip has been lost or broken away and the break is worn. The front has a raised design of a large letter A flanked with annulets. There are the remains of a pellet border around the edge of the disk, very worn in places. It is 19.3mm by 18.5mm and 4.3mm thick; it weighs 5.63 grams. The 'A' design indicates it originates from Augsberg, Germany and the reverse disk would probably have had a pinecone; the heradlic badge of the city (Eg…
Created on: Tuesday 8th November 2011
Last updated: Wednesday 9th November 2011
Spatial data recorded. This findspot is known as 'Montacute', grid reference and parish protected.

Record ID: HAMP-268CF3
Object type: SPOON
Broad period: POST MEDIEVAL
County: Greater London Authority
Workflow stage: Awaiting validation
A Post-Medieval (c.1690-1715) apparently copper-alloy-covered lead-alloy spoon with a diamond shaped or 'dognose' terminal and oval bowl. It measures 190mm long, 45mm wide and 15mm in depth (the latter two measurements being at the bowl). The dognose terminal is plain and 26mm wide with rounded edges. The stem of the spoon is flat with chamfered edges, forming a sub-rectangular profile. It tapers to a rat-tail support on the back of the bowl which stretches for just under half the bowl's length. On the back of the stem, just below the terminal, is a probable Maker's mark comprising…
Created on: Wednesday 6th February 2013
Last updated: Tuesday 19th February 2013
Spatial data recorded.