Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security):001422EDE4401AC3
    • Sort:broadperiod
    • Broad period:POST MEDIEVAL
    • Primary material:Lead
    • Show this many records per page:10

  • Image not taken

Record ID: HAMP-F2CC91
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast lead pot mend, used to mend a broken vessel in order to lengthen the period of use after damage had occurred. It is sub-circular and slightly curved in profile, with the section above the slot slightly misaligned to that below. The vessel is also curved and c. 3.5mm thick. Its dark orange-brown colour suggests that this is a corroded iron cooking vessel, of early post-medieval date.
Created on: Friday 8th April 2011
Last updated: Tuesday 12th April 2011
Spatial data recorded. This findspot is known as 'Bishops Waltham CP', grid reference and parish protected.


  • Thumbnail image of SUSS-486225

Record ID: SUSS-486225
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval - Modern cast lead two disc cloth seal. The disks sit one on top of the other and are joined by a tab. One had a hole in the centre and the other a projecting point which has been pushed through the hole and then stamped flat to fix them together. The tab is mostly missing from old breaks. The stamp has the initials R.W. The discs are bent and at most 27.4mm in diameter, 3.7mm thick and it weighs 14.22 grams. The simplcity of the design of initials rather than a privy mark suggests a later date, 17th-18th century (cf Egan p.84, no.234, 236 and p.86, no.242)
Created on: Tuesday 12th October 2010
Last updated: Thursday 14th October 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of CAM-1E9063

Record ID: CAM-1E9063
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation Find awaiting validation
A lead token of Post-Medieval date. Weight 57.01g (0.1257pounds or 2.0110 ounces), diameter 33.21mm, thickness 7.61mm. The upper surface of the artefact is decorated with a raised symbol, possibly two letters joined together which could be CH or more likely HD. It seems that the symbol was a HD, where the vertical of the 'D' was also the right-hand vertical of the 'H' however it must be noted that the lower part of the letters, if this is what they are, have been worn or scraped away leaving just a faint mark visible today. These tokens were usually locally made with no references a…
Created on: Friday 10th June 2011
Last updated: Wednesday 29th August 2012
Spatial data recorded. This findspot is known as 'Huntingdon District Area', grid reference and parish protected.


  • Thumbnail image of SOM-D5FFB5

Record ID: SOM-D5FFB5
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A circular cast lead alloy weight of uncertain date with a trapezoidal cross section. A 'D' is stamped on one face and there is an incised line on the other. It is 23.8mm in diametre, 6.6mm in thicknes and weighs 27.82g. 0.98 ounces. Plain weights were cast locally in lead from the Roman period onwards for a wide variety of uses and are hard to date precisely. This example is about an ounce in the avoirdupois system in use since the Medieval period suggesting a late Medieval - Post Medieval date.
Created on: Thursday 6th October 2011
Last updated: Friday 14th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of HAMP-226B62

Record ID: HAMP-226B62
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A corroded but complete cast lead button of post-medieval date (Th. without loop: c. 9.1mm). The button is domed, with a flat back with central, integral iron loop of circular cross-section; no casting seam is visible. The upper surface bears patterning moulded in low relief, consisting of lines and circles around a central cross, but with obvious symmetry. Read (2005, 57ff.) dates such buttons to the 16th century.
Created on: Monday 6th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Tarrant Hinton CP', grid reference and parish protected.


  • Thumbnail image of SOM-E9FC97

Record ID: SOM-E9FC97
Object type: BUTTON
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast lead button with integral shank which is now broken. The button is circular with a slight projection at one edge producing a 'drop' shape. It has a slightly concave back and conical front, producing a broadly triangular cross section. The conical front is decorated with three raised concentric rings around a central pellet with thinner raised lines radiating out from the centre to the edge. The back of the button has the remains of the integral shank, now two stubs with a gap between which would have been joined by the loop. It measures 23.1 mm in diameter, 9.5 mm i…
Created on: Monday 31st October 2011
Last updated: Friday 9th December 2011
Spatial data recorded. This findspot is known as 'Ilchester', grid reference and parish protected.


  • Thumbnail image of SOM-ECC3B7

Record ID: SOM-ECC3B7
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post medieval lead cloth seal, issued during the reign of Queen Anne. Part of a four-disc seal from the series featuring a monarch's head. It is comprised of four discs in two conjoined pairs, joined in the centre with a rectangular tab. The seal is bent in the centre at the tab so the pairs of disks are back to back. A projecting tab on the back of one outer disk has been pushed through a hole in the other outer disk and stamped flat, joining them. One of the disks next to the tab is stamped with the bust of Queen Anne around which is the legend FIDEI DEFEN (Defender of the Faith). T…
Created on: Monday 31st October 2011
Last updated: Tuesday 1st November 2011
Spatial data recorded. This findspot is known as 'Ilchester', grid reference and parish protected.


  • Thumbnail image of SF-301791

Record ID: SF-301791
Object type: FIRE MARK
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Published Find published
A decorative lead fire mark of 19th century date. It is square in form, flat and with some slight post-depositional damage to the edges. The back face is flat and undecorated although has a slight lip visible in places around its outer edge. The front face has extensive moulded relief decoration. This comprises a figural scene that appears to broadly depict a votive or religious building separated into three vertical panels and with a border or roof at the top formed from two broad transverse ridges separated by three narrow transverse grooves. The central panel is slightly recessed f…
Created on: Wednesday 27th March 2013
Last updated: Tuesday 27th October 2015
Spatial data recorded. This findspot is known as 'Clare', grid reference and parish protected.


  • Thumbnail image of HAMP-6F86D3

Record ID: HAMP-6F86D3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval/post-medieval cast lead token decorated unifacially in relief. It has been bent following old damage. It depicts a voided long cross with central pellet and large voided 'O' set at forty-five degrees in each angle.
Created on: Friday 5th July 2013
Last updated: Friday 12th July 2013
Spatial data recorded. This findspot is known as 'Chilcomb CP', grid reference and parish protected.


  • Thumbnail image of SOM-E6F34E

Record ID: SOM-E6F34E
Object type: POWDER MEASURE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post-Medieval sheet lead powder holder cap (c. 17th century). It has straight sides, now squashed inwards, with an oval top (also squashed and distorted). Where the sides meet the top there are two attachment loops, one on each side, one split in the middle, the other bent inwards. The sides are comprised of a strip of lead bent into a circle and attached to edges of the circular face. The other face remains open to allow the rest of the powder holder to fit into it. The cap measures 24.0 mm in height, 62.0mm by 36.7mm at the top and 35.0mm by 34.0mm at the base. The sides are 3.…
Created on: Thursday 9th July 2015
Last updated: Monday 20th July 2015
Spatial data recorded. This findspot is known as 'Tatworth and Forton CP', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 29
Search server index: asgard

You are viewing records: 1 - 10.

Search statistics

  • Total quantity: 324
  • Mean quantity: 11.172
  • Maximum: 233

Filter your search

1 - 10 of 29 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.