Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Sort: broadperiod
    • Broad period: POST MEDIEVAL
    • Direction: desc
    • Object type: MOUNT

  • Thumbnail image of IOW-058500

Record ID: IOW-058500
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published Find published
A complete cast copper alloy mount of post-Medieval date. (c.1600-c.1750). The mount is convex at the front and flat at the rear. In plan it is in the form of a heart with a fleur-de-lis terminal. The side fleurs of the fleur-de-lis curve round to join the ridge and thus have circular holes within. At the rear are two integral tapering spikes, circular in cross-section. Both of these are bent towards the fleur-de-lis end. The mount is generally corroded but patches if a shiny khaki patina survive at the front. The rear face is covered with loose light green copper alloy corrosio…
Created on: Sunday 17th May 2009
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of SOM-3FDBB7

Record ID: SOM-3FDBB7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval, 17th century, cast copper alloy openwork mount with integral attachment spikes. The mount is flat and shaped into four lobes, two large pointed oval lobes alternating with two smaller circular lobes. The tip of one of the pointed oval lobes is lost, possibly to damage. The lobes have circular holes in the centre and there is a further hole in the centre of the mount; the holes in the pointed oval lobes join the central hole while those in the circular lobes are connected to it by an indent on the front. On the back are two integral spikes, one is complete and bent inwar…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.


  • Thumbnail image of HAMP-D002C5

Record ID: HAMP-D002C5
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and incomplete sub-rectangular cast copper-alloy mount of post-medieval date. The object is flat with a main rectangular body which incurves at one end to a width of 4.4mm before an old break; it appears to be truncated at the other end due to old damage. Before the end narrows there is a pair of double transverse grooves on the upper surface between which possible decoration within a rectangular field now obscured by corrosion. The main body beyond has grooves running just inside the long edges. The field within appears plain, again perhaps a product of corrosion, apar…
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Broughton CP', grid reference and parish protected.


  • Thumbnail image of WILT-B583C2

Record ID: WILT-B583C2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy sexfoil mount of Post-medieval date with two spikes on the reverse.
Created on: Friday 15th June 2012
Last updated: Wednesday 20th June 2012
Spatial data recorded.


  • Thumbnail image of HAMP-6E7D16

Record ID: HAMP-6E7D16
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy sheet binding, sub-circular in plan, of probable post-medieval date. The piece has suffered a longitudinal crack but it has only been slightly distorted in plan. The thin strip is flat at one end and cusped on the other other giving it the superficial appearance of a crown. The cusping is formed of triangles each with small semicircular cusps. An upper zone from just below the cusps is delineated by a double longitudinally incised line; the area below is plain, as is the internal surface. The upper zone is decorated with punched curvilinear decoration. Above the longitu…
Created on: Thursday 13th October 2011
Last updated: Thursday 13th October 2011
Spatial data recorded. This findspot is known as 'Abbotts Ann CP', grid reference and parish protected.


  • Thumbnail image of SUSS-7D6712

Record ID: SUSS-7D6712
Object type: MOUNT
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval cast copper alloy lozenge shaped mount. The mount is flat on the surface with bevelled edges. On the reverse there are two integral rivets. One of them has broken and is now 3.6 mm long, the other is bent over at 90 degrees and approximately 11.6 mm long at is full length. A piece of dried leather is still fastened on the underside of the mount. The metal surface of the object is a red copper colour with a bright green patina in places. The mount is 32.5 mm, 25.6 mm at its widest point, and wieghs 6.82 grams. It probably dates to 1500 - 1700 AD.
Created on: Thursday 3rd June 2010
Last updated: Friday 4th June 2010
Spatial data recorded. This findspot is known as 'Warningcamp', grid reference and parish protected.


  • Thumbnail image of PUBLIC-750008

Record ID: PUBLIC-750008
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper alloy mount. It has a central D shaped section with incised radiating lines creating a scallop shell appearance. There are large lobed knops projecting from the opposite ends (one in the centre of the straight edge of the D one in the centre of the curve). The one projecting from the straight edge starts with a narrow projecting bar which expands into a terminal in the form of a square flanked by triangles. The opposite projection has a large oval knop topped by a smaller more pointed oval knop with a horizontal incised line across the middle of it, possibly…
Created on: Saturday 3rd April 2010
Last updated: Monday 7th June 2010
Spatial data recorded.


  • Thumbnail image of SUSS-C159B2

Record ID: SUSS-C159B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation Find awaiting validation
A Post-Medieval, cast, copper alloy mount. The mount has a flat plate and is slightly heart shaped with one end tapering and folding underneath to form a hook. The reverse is flat except for the hook and a protruding stud, both of which have been integrally cast. The stud is 5.1 mm high and 5.5 mm in diameter. The metal is a brownish-red colour with an irregular formation of a green patina in some places. The mount is 12.3 mm at its widest point, and 19.3 mm long; it weighs 1.97 g. Read (1988) Fig 17 no.6 illustrates a similar hooked fitting with attachment studs. He dates…
Created on: Thursday 13th May 2010
Last updated: Monday 17th May 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.


  • Thumbnail image of HAMP-4E0C41

Record ID: HAMP-4E0C41
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A copper-alloy mount in the form of a Tudor rose of post-medieval date (16/17th century AD). This small mount is essentially flat and in the form of a double five-petalled rose with small pointed lobes in the cusps. The centre of the upper surface is moulded in low relief with five arms emerging from a central point to join the side of the internal rose. Between each arm a small spur springs from the side of the internal rose; thus five heart shaped cells are created. In one of these white enamel survives in place. In an adjacent cell formed between the roses is red enamel, and w…
Created on: Sunday 8th December 2013
Last updated: Monday 9th December 2013
Spatial data recorded.


  • Thumbnail image of HAMP-83BBB0

Record ID: HAMP-83BBB0
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A small copper-alloy post-medieval mount in the form of a fleur-de-lis. The central fleur is pointed, while the lateral ones are lobes set at right angles to it. They are delineated by V-shaped grooves between them on the upper surface. A large expanding lobe emerges from the base of the lis and is rounded at its end. The sides of the mount are bevelled subtly on the upper surface; the lower surface is flat. Emerging from the reverse of the central fleur is a truncated integral prong of rectangular cross-section, now vestigial. This is the only obvious means of attachment. Post…
Created on: Wednesday 11th December 2013
Last updated: Wednesday 11th December 2013
Spatial data recorded.


  • Image not taken

Record ID: HAMP-850B60
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A cast copper-alloy mount of post-medieval date (c.AD 1600-1750), plausibly a harness fitting. The mount has a heart-shaped plate that is very shallowly convex at the front and concave at the rear. At the narrow end there is an integral fleur-de-lis-shaped protrusion, bent down slightly at the tip. The central element of this feature is pointed and the two side fleurs are small and rounded, set at right angles to it. There is a V-shaped groove on the upper surface of the mount about halfway along which gives more definition to the heart shape. Below this, and above the lis terminal, …
Created on: Wednesday 11th December 2013
Last updated: Wednesday 11th December 2013
Spatial data recorded.


  • Thumbnail image of SOM-F89F5C

Record ID: SOM-F89F5C
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A corroded post-medieval cast copper-alloy mount of 17th to 18th-century date. It has a flat oval body. From each shorter end of the body protrude a slightly raised trefoil terminal and flared terminal respectively. Each terminal features a pair of crude grooves to delineate the designs. From the flat back emerge two integral prongs. These spring from circular bases at the trefoilate terminal and the junction of the body with the other terminal. Only stubs of the prongs survive; they appear to be of rectangular cross-section. This mount has corroded to a red/brown colour. Such mounts …
Created on: Monday 4th August 2014
Last updated: Monday 4th August 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.


  • Thumbnail image of SOM-F8E344

Record ID: SOM-F8E344
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
A corroded post-medieval cast copper-alloy mount of c. 17th-century date. It has a flat trapezoidal body with bevelled edges on its upper surface. From the narrower end of the body an initially wider triangular protrusion emerges. From the wider end of the body is an initially narrower circular protrusion. From the flat back two integral prongs would have emerged. One no longer exists; its attachment scar is located at the centre of the circular terminal. A prong emerges from one of the bases of the triangular terminal, as such completely off centre. The prong curves inward to the cen…
Created on: Monday 4th August 2014
Last updated: Monday 4th August 2014
Spatial data recorded. This findspot is known as 'Near Wincanton', grid reference and parish protected.


  • Thumbnail image of NLM-EC244D

Record ID: NLM-EC244D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Post-medieval copper-alloy mount. Cast oval plate with a trilobate knop at one end and a smaller rounded knop at the other. Two thick short integrally cast pins (of diameter and length 3mm) project from the flat back. The display face bears a balanced motif of a long shafted cross springing from between what appear as leaves or petals, all these motifs being rendered as enamel filled cells. The putative leaves now retain a dull red degraded enamel, while the borders are mainly dark blue on one side, and mainly white on the other, though each has a pair of small areas of the opposed ti…
Created on: Tuesday 10th March 2015
Last updated: Tuesday 24th October 2017
Spatial data recorded. This findspot is known as 'Faldingworth', grid reference and parish protected.


  • Thumbnail image of SOM-2DCB69

Record ID: SOM-2DCB69
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval mount dating to the 17th century for a leather item. The flat plate of the mount has a tri-lobed end with a narrowed waist underneath, the lobes each side being thin and curved out, one now bent forward at the tip. This waist then expands forming rounded shoulders before a constriction formed of indents coming in from both sides below which it expands again to a square plate with outwardly curved corners. Below the square is an incised line across the front then a wider collar with rounded ends and possibly a broken lower edge. On the back are two integral attachment s…
Created on: Thursday 18th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded. This findspot is known as 'Stoke St Gregory CP', grid reference and parish protected.


  • Thumbnail image of SOM-2E2489

Record ID: SOM-2E2489
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper mount dating to the 16th or 17th centuries. The mount is in the form of a large circular boss with a projection to one side. The boss has a hollow back and convex front which rises in two steps to a central dome, between the first and second step is a double incised ring. The edges of the boss are irregular and slightly damaged but it seems probable there was only ever one projection. The projecting piece is in the form of an oval lobe with a smaller lobed terminal beyond, both are convex on the front and the larger lobe has a hollow back. From the back of th…
Created on: Thursday 18th June 2015
Last updated: Monday 29th June 2015
Spatial data recorded. This findspot is known as 'Stoke St Gregory CP', grid reference and parish protected.


  • Thumbnail image of SOM-E821D3

Record ID: SOM-E821D3
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval cast copper-alloy openwork mount with integral attachment spikes. The mount has a flat openwork plate with bevelled edges which is general piriform in shape with the top point elaborated into a trefoil. The side petals of the trefoil have circular indents in their centre and the central petal is elongated, echoing a fleur de lis. There is a projecting solid rectangular knop at the base flanked by slight rounded knops and a solid chervon across the openwork centre. On the back are two integral circular sectioned spikes with sharp points. They are placed on a central line,…
Created on: Thursday 8th January 2015
Last updated: Thursday 8th January 2015
Spatial data recorded. This findspot is known as 'Wellington CP', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 17
Search server index: valhalla

You are viewing records: 1 - 17.

Search statistics

  • Total quantity: 17
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

1 - 17 of 17 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.