Record ID: WILT-02BF51
Object type: HINGE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A Post-Medieval (1500-1700) copper alloy decorative hinge from either a box or possibly a book fitting, folded on top of itself. It measures 23.92x12.50x4.13mm and weighs 2.7g. The object consists of two openwork halves c.1mm thick with what appears to be a shorter, flat spike sandwiched between. One half terminates in a fleur-de-lis a small rivet hole (1.3mm diameter) at the farthest point. Below this is an inverted, rather angular, heart-shaped openwork at the base of which is another rivet hole, complete with iron rivet corroded in place. Below is the c.4x2.5mm are of 'hinge' f…
Created on: Wednesday 26th January 2011
Last updated: Thursday 3rd February 2011
Spatial data recorded. This findspot is known as 'Chippenham', grid reference and parish protected.

Record ID: SOM-A7C805
Object type: CUTLERY
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Incomplete post medieval copper alloy pastry jigger consiting of part of the central shaft and the cross bar forming the head. The shaft is is circular in cross-section at the apex and sub-triangular in cross-section where it joins the head. It swells gradually away from the head, reaching its maximum diameter at a point just below the apex. The head is flat. The upper edge of the head curves upwards, then downwards to either side of the shaft, creating a symmetrical, wavy effect. The extant working end consists of a 'T'-shaped head that would have been used for cutting and impressing…
Created on: Wednesday 12th May 2010
Last updated: Wednesday 7th September 2016
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.

Record ID: WILT-1CA621
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete early Post-medieval copper-alloy eye section from a toggle clasp. The section is comprised of a circular 'eye' containing an irregular, but roughly cross shaped aperture. A circular loop and an incomplete plate extends from one side of the eye. The artefact has been bent.
Created on: Wednesday 20th June 2012
Last updated: Monday 5th March 2018
Spatial data recorded.

Record ID: HAMP-48D1C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A broken and incomplete cast lead-alloy token of post-medieval date with a initial 'A' (Powell type 2) on one side, and initials ?'I' on the other (Powell type 2)
Created on: Monday 3rd September 2012
Last updated: Thursday 2nd January 2014
Spatial data recorded.

Record ID: SOM-82F578
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Post Medieval silver half groat of Henry VIII (1509-1547), uncertain initial mark, minted at Canterbury, 1509-1547 AD.
Created on: Wednesday 26th October 2011
Last updated: Thursday 3rd November 2011
Spatial data recorded. This findspot is known as 'Kingston Deverill', grid reference and parish protected.

Record ID: WILT-93DD24
Object type: SPOON
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of Post-Medieval (late 17th or 18th century) copper alloy small spoon, consisting of part of the handle and terminal only. It measures 35.35x11.21x4.64mm and weighs 2.4g. The main body of this object is an elongated triangle in shape, flat in cross-section. The top edge is curved and also curves slightly backwards. At the centre of the curve is a collared globular terminal, topped with a knop. The pointed end of the triangle is missing but would have extended into a thin, twisted shaft, circular in section, and from which the spoon bowl would have projected. The upper sid…
Created on: Thursday 27th October 2011
Last updated: Friday 27th November 2015
Spatial data recorded. This findspot is known as 'Salisbury', grid reference and parish protected.

Record ID: SOM-33FF28
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Post-medieval silver threepence of Elizabeth I (1558-1603) dating to the year 1567 (on coin). Initial mark probably coronet. Minted at London. North (1991:135) no.1998. The coin is very worn and has a small tear on the circumference.
Created on: Thursday 5th February 2015
Last updated: Monday 23rd February 2015
Spatial data recorded. This findspot is known as 'Zeals', grid reference and parish protected.

Record ID: PUBLIC-D61514
Object type: LACE TAG
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete post medieval copper alloy lace tag, constructed from a piece of sheet copper alloy, the long edges are folded over and then the sheet is rolled to form a tapering cylinder ending in a sharp point. The tag has been shaped in the form of a cattle horn and is very finely finished. There are no signs of damage and the condition is very good. Medieval or Post-Medieval copper alloy sheet rivet, of the type usually used for repairing metal vessels. The rivet is formed from triangular piece of sheet metal, rolled into a cone, with a flat top and coming to a sharp point at the…
Created on: Saturday 21st September 2013
Last updated: Monday 13th July 2015
Spatial data recorded. This findspot is known as 'Cheddelwich', grid reference and parish protected.

Record ID: SOM-1DE6A8
Object type: BELL
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A complete cast copper-alloy spherical animal bell (crotal) of post-medieval date. The bell comprises two hemispherical domes with a raised circumferential join. The upper hemisphere has two sub-circular sound holes with a rectangular loop projecting from the top between them. The loop is formed of an angular U-shaped bar of square cross-section and is 9.8 mm high, 11.3 wiide and 4.2mm thick. The curve of the bell continues under the loop aperture suggesting it was made using a detachable 'sprue-piece'; this method was introduced in the 17th century. The lower hemisphere has a long, w…
Created on: Monday 18th August 2014
Last updated: Thursday 21st August 2014
Spatial data recorded. This findspot is known as 'Mere CP', grid reference and parish protected.

Record ID: SOM-FD1746
Object type: HOOK
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A Post Medieval lead-tin (pewter) dress hook probably dating to cAD1500 - 1600. The plate is formed of three lobes arranged in a triangle with a central pellet and raised lines between them, defining each lobe. Each lobe is domed with a convex front and flat back and decorated with a saltire with a pellet in each quarter. The oputer edge of the lobes are decorated with a row of pellets which project slightly to create a wavy border. The backplate has the remains of two projections at the top, each near the centre of a lobe and aligned along a casting seam. Starting in the centre of th…
Created on: Tuesday 11th December 2018
Last updated: Monday 31st December 2018
Spatial data recorded. This findspot is known as 'West Lavington', grid reference and parish protected.

Record ID: SOM-A406B7
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Post-medieval cast copper alloy double-loop buckle frame, missing its pin and plate. It has oval loops which are triangular in section with a flat back. At the centre od the outerside of each loop is an oval expansion stamped with an annulet, possibly part of a very worn flower design. There are lobed knops either end of the strap bar.there are traces of a black laquer coating and some iron corrosion around the strap bar which may be the remains of the pin. It measures 40mm in width, 24mm in length and is 2.5mm thick. It is similar to Whitehead (1996, 63, 66) no. 408 with flower des…
Created on: Tuesday 14th February 2012
Last updated: Monday 27th February 2012
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.

Record ID: SOM-A42CC2
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy double looped buckle, circa 1550 - 1650 AD. It is oval in plan with two D-shaped loops and oval in cross section. The centre of the outer edge of each loop is expanded into a oval each decorated with circa five incised transverse lines radiating out from the centre of the inner side. The strap bar is recessed from the front and slightly projecting at the back. Slight transverse indents on the front create the impression of knops at either end. The pin is missing but there is iron corrosion on the strap bar which might be the remains of an iron pin. It m…
Created on: Tuesday 14th February 2012
Last updated: Monday 27th February 2012
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.

Record ID: SOM-A45AF2
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
Incomplete post medieval cast copper alloy buckle frame. The frame was double looped but one of the oval loops has been lost to an old break. It is D shaped in section with a flat back and a decorative outer edge. The decoration consists of an asymmetrical moulded pattern of four folded leaves running around the outer edge, the lobed of one overlapping the base of the other. The strap bar has a slight curve due to damage and a lobed knop at each end. The frame measures 21mm long, 23.4mm wide, 2.8mm thick and weighs 3.08 grams. The frame appears to be part of a large group of double …
Created on: Tuesday 14th February 2012
Last updated: Monday 27th February 2012
Spatial data recorded. This findspot is known as 'Alvediston', grid reference and parish protected.

Record ID: WILT-67ABE5
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An extremely worn 17th-century copper-alloy post-medieval farthing of Charles I, 'Maltravers round' type 3, London mint (1634-1636 AD; North 2280-2282)
Created on: Friday 18th May 2012
Last updated: Friday 18th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-67FA88
Object type: COIN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete worn and corroded 17th-century copper-alloy post-medieval rose farthing of Charles I, Type 1c -1d, London mint (1634-1644 AD; North 2289 - 2290).
Created on: Friday 18th May 2012
Last updated: Friday 18th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

• 

  Image not taken

Record ID: WILT-7580B2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval biface lead token, measuring 18.9mm in diameter. It has a thickness of 2.4mm and weighs 3.4grams. Obverse: Central pellet with radiating bands superimposed on two concentric circles Reverse: Central short cross with V's in each angle superimposed on two concentric circles Date: Probably 16th or 17th century
Created on: Saturday 19th May 2012
Last updated: Wednesday 20th June 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-759F75
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval biface inscribed lead token, measuring 22.5mm in diameter. It has a thickness of 1.3mm and weighs 4.0grams. Obverse: B G inscribed Reverse: Retrograde h y and w inscribed Date: Probably 16th or 17th century
Created on: Saturday 19th May 2012
Last updated: Saturday 19th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-E1E1D0
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval farthing trade token of Jeremiah Sloper, Marlbrough. It measures 15.2mm in diameter, is 0.5mm thick and weighs 0.58 grams Obverse: A sugar loaf [IEREMI]AH . SLOPER Reverse: I . E . S IN MALBROVGH Reference: Williamson, Wiltshire p. 1241 no 145
Created on: Thursday 24th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-E26F35
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An Early Post-Medieval farthing trade token possibly of Richard Wootten. It measures 15.3mm in diameter, is 1.0mm thick and weighs 0.85 grams Obverse: (mullet) R . W (mullet) RICHARD WOOTTEN? Reverse: IIndiscernible IN [...] 1666 [...]
Created on: Thursday 24th May 2012
Last updated: Thursday 24th May 2012
Spatial data recorded. This findspot is known as 'Urchfont', grid reference and parish protected.

Record ID: WILT-608CE5
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete probably Post-Medieval (1500-1700) openwork probable strap distributor with domed centre boss. It is missing just less than half. Measures 29.28x29.04x8.13mm and weighs 6.7g. The plate around the centre boss (c.12mm diameter) is more or less circular in shape with an oval perforation in each quarter (although only two of these remain intact). Between each quarter protrudes a semi-circular lug (again, only two survive) with a rivet hole c.3mm in diameter just below (three rivet holes survive). The plate is flat (2.68mm thick) though hollowed to the reverse behind the ce…
Created on: Wednesday 30th May 2012
Last updated: Thursday 16th August 2012
Spatial data recorded. This findspot is known as 'Warminster', grid reference and parish protected.