Record ID: DOR-542D87
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A cast copper alloy horse harness pendant with enamel decoration. A shield-shaped pendant. The design is probably gules, a fesse between six martlets (3/3) or (a red enamel field with six birds (martlets) and a horizontal band (fesse) and which was probably originally gilded.) These are the arms of the Beauchamp family. The pendant is quite large. There is a suspension loop at the top with a circular pierced hole. The back is flat and undecorated. Date: Medieval - 14th century Dimensions: 49.09 mm x x 31.07 mm x 7.13 mm Weight: 17.09 g A shield-shaped stud with the same coat of a…
Created on: Wednesday 27th February 2008
Last updated: Saturday 13th November 2021
Spatial data recorded. This findspot is known as 'Tarrant Launceston', grid reference and parish protected.

Record ID: SOM-A74FCE
Object type: BROOCH
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An unusually large and decorative medieval silver annular brooch complete with pin and decorated with incised lines, inlaid niello and an inscription. The brooch is circular in cross section and, while weighty, the weight suggests it is hollow. There is a constriction at one point where the pin head is looped and corresponding slight wear on the opposite side of the ring, on the front where the pin point rests. The front is decorated with four bands of decoration with plain areas between. The bands are evenly spaced around the ring with one starting adjacent to the pin constrict…
Created on: Tuesday 14th May 2019
Last updated: Friday 23rd July 2021
Spatial data recorded.

Record ID: DOR-24560A
Object type: TOKEN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A Medieval to Post Medieval biface lead token, dating to AD 1500-1600. Powell, type 10 (heads and bust) and Powell type 14 (heads and bust) on the other. The token is circular in plan. The inverse shows a raised head of an individual facing left wearing a hat, the outer edge of the token is decorated with a pellet border. The token has a raised cross, which is central and does not reach the outer edge, within each quarter of the cross is a raised pellet and the edge has a pellet border. The token is a light grey/off white colour. Reference: Powell: Classification for Lead Tokens o…
Created on: Wednesday 18th September 2019
Last updated: Monday 20th April 2020
No spatial data available.

Record ID: SOM-7B7446
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A Medieval cast copper-alloy pedestal type seal matrix dating to the 14th century. The matrix face is sub-circular. The pedestal is faceted with six facets and thins as it rises before it widens slightly to a collar topped by a rounded terminal. Below the collar is an incised transverse groove that emphasises the collar. Above the collar there is a flattened crescent, ends upwards, within which the terminal sits. The rounded terminal is flat with a circular piercing through it. The pedestal has areas of abrasion and a few chips in it but no clear marks which indicate the orientation o…
Created on: Tuesday 10th March 2020
Last updated: Monday 23rd March 2020
Spatial data recorded. This findspot is known as 'Tarrant Keyneston CP', grid reference and parish protected.

Record ID: SOM-2C162A
Object type: COIN
Broad period: ROMAN
County: Dorset
Workflow stage: Published
A Roman silver plated contempory copy of a denarius of Tiberius dating to AD 14 to 37. (Reece period 1). PONTIF MAXIM reverse type depicting a female seated facing right, holding a sceptre and branch. Copying a coin from Lyon mint. Copying RIC Vol. I (revised) p.95 no. 26 or 28.
Created on: Tuesday 1st July 2014
Last updated: Thursday 19th March 2020
Spatial data recorded. This findspot is known as 'Chickerell CP', grid reference and parish protected.

Record ID: SOM-14B2D1
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
Medieval cast copper alloy vesica (oval with pointed ends) shaped seal. The seal is a flat plate with an incised design on the front and a lug on the reverse. The lug is by the top point of the seal and is semi-circular in profile with an oval hole through it. The hole has worn through at the top edge. Below the lug is a short stepped collar from which a tail runs down the centre of the seal to the bottom edge, tapering in width as it does so. The front of the seal has a central design and a legend around the edge. The design is a a pascal lamb (lamb and flab); lamb going right, head …
Created on: Tuesday 7th February 2012
Last updated: Wednesday 19th February 2020
Spatial data recorded. This findspot is known as 'Athelhampton', grid reference and parish protected.

Record ID: SOM-D1FB03
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Published
An incomplete Roman copper alloy developed T-shaped hinged brooch probably dating to AD75 - 150. Only the wings and upper part of the bow remain. The wings are chipped at each end but nearly complete and have a pattern across the front of a single incised diagonal line about halfway along and a pair of incised lines at the end. The broken ends are filled with white cement to hold the hinge bar. There is a slot through the centre of the back of the head in which the pin would have hinged. This is filled with iron corrosion, probably the remains of an iron pin. The upper part of the …
Created on: Tuesday 26th November 2019
Last updated: Monday 10th February 2020
Spatial data recorded. This findspot is known as 'Melbury', grid reference and parish protected.

Record ID: SOM-D388A8
Object type: COIN
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete Medieval silver penny of John (1199-1216) dating to AD 1207 to 1210. Short cross class 5c. Minted by Beneit in London. North (1994, 221) no. 971 and Mass (2001, 40 & plate 63) The coin has broken (rather than been cut) in half, only one half is present, and a small piece has come off the remaining half.
Created on: Tuesday 26th November 2019
Last updated: Monday 2nd December 2019
Spatial data recorded. This findspot is known as 'Tarrant Crawford CP', grid reference and parish protected.

Record ID: SOM-A1051D
Object type: KEY (LOCKING)
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
Medieval copper alloy casket key dating from the late 12th to early 14th century. It has a lozenge shaped bow with a circular cnetral hole and a solid oval cross sectioned shank with a projecting pin at the end. There is a slight expanded knop on both faces of the shank at the junction with the bow. The bit is solid and broadly rectangular in form with an indent in the side closer to the terminal. The key measures 32.79mm in length, 9.70mm in width at the bow, 1.55mm in thickness and weighs 1.88g. A similar example can be found in Read (2001:72) no. 558 which he dates to the late …
Created on: Tuesday 24th September 2019
Last updated: Monday 2nd December 2019
Spatial data recorded. This findspot is known as 'Tarrant Crawford', grid reference and parish protected.

Record ID: SOM-A17B1E
Object type: BUCKLE
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
An incomplete Medieval (1350 - 1450 AD) copper alloy oval, lipped buckle frame of Meols Type 4, missing its pin. The bar is slightly flattened, narrowed and offset. The slightly expanded point (lip) in the centre of the outer edge of the frame has an incised transverse notch for the pin. The buckle measures 17.79mm in length, 15.03mm in width, 1.79mm in thickness and weighs 0.83g. Similar buckle frames from London (Egan & Pritchard 1991: 70, nos.279-283) date between AD 1350 and 1450.
Created on: Tuesday 24th September 2019
Last updated: Monday 2nd December 2019
Spatial data recorded. This findspot is known as 'Tarrant Crawford', grid reference and parish protected.