Record ID: SOM-4A3D7A
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
One fragment of worn, sub-angular translucent crystalline calcite with flat cleavage planes visible on three axis and worn, smoothed, sides. Probably naturally formed: no evidence seen for artificial shaping. 29.1mm by 28.3mm by 20.2mm and 24.39g in weight. Although natural and potentially local as calcite does form in limestone the piece was picted out by the finder as unusual in the field. It was found in an area that has produced worked flint of Mesolithic to Bronze Age dte with a focus in the Neolithic and might be associated with the flint as a deliberately selected and…
Created on: Wednesday 1st April 2020
Last updated: Wednesday 1st April 2020
Spatial data recorded. This findspot is known as 'Chewton Mendip CP', grid reference and parish protected.

Record ID: SOM-7B7446
Object type: SEAL MATRIX
Broad period: MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
A Medieval cast copper-alloy pedestal type seal matrix dating to the 14th century. The matrix face is sub-circular. The pedestal is faceted with six facets and thins as it rises before it widens slightly to a collar topped by a rounded terminal. Below the collar is an incised transverse groove that emphasises the collar. Above the collar there is a flattened crescent, ends upwards, within which the terminal sits. The rounded terminal is flat with a circular piercing through it. The pedestal has areas of abrasion and a few chips in it but no clear marks which indicate the orientation o…
Created on: Tuesday 10th March 2020
Last updated: Monday 23rd March 2020
Spatial data recorded. This findspot is known as 'Tarrant Keyneston CP', grid reference and parish protected.

Record ID: SOM-381B46
Object type: FIGURINE
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy figurine depicting the god Mars. The figurine shows a standing male with an helmet and short tunic. He has got a crest projecting out of the helmet c.1.4 mm in high and c.2.68mm in width. The crest runs along the centre across the top from his forehead and down the back of the helmet ending just before the neck, the crest is very worn and originally more prominent. The whole head measures 19.33 mm in length. Its face has got two indented circular eyes which may have held enamel or glass beads. The lower jaw and mouth area project slightly forward. Wear in this area …
Created on: Saturday 7th March 2020
Last updated: Saturday 7th March 2020
Spatial data recorded. This findspot is known as 'Chard', grid reference and parish protected.

Record ID: SOM-E41828
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Part of a Post Medieval copper alloy double loop oval buckle dating from c AD1500-1650. One loop is missing at an old, worn break. The central strap bar is narrowed with a small moulded knop at either end. The pin is missing. The front of the frame has bevelled edges and the back is flat and undecorated. The piece has a brown patina. It measures 25.9mm in length,1 9.3mm in width, 2.5mm in thickness and weighs 2.94g. Whitehead (2003:52) states that this type of double loop buckle is extremely common and has been found in dated contexts from the mid 14th to the late 17th century. H…
Created on: Tuesday 3rd March 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-53AE77
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A small, complete Medieval to Post Medieval copper alloy double loop oval buckle dating to c. 1350 to 1650. The loops are oval with slightly expanded outer edges. The frame is D-shaped in cross section. The frame has bevelled inside and outside edges and there is a pin rest at each side of the frame. The pin bar is narrowed from the frame and recessed and the pin is hooked around it. The in is oval in cross section and tapers to a point. The piece has a green patina. It measures 18.40mm in length, 13.97mm in width, 1.97mm in thickness and weighs 1.29g. This style of buckle is qui…
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-516CA0
Object type: BUCKLE
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval copper alloy single loop buckle dating to c. 1250-1500. The frame is D-shaped with a narrowed but not offset strap bar. The pin is missing. The piece is corroded and the back has a rough finish. The buckle has a brown patina. It measures 21.24mm in length, 32.16mm in width, 3.10mm in thickness and weighs 5.34g. Egan (2007, 86) categorises this form as Type 1 and suggests they are focussed in the 13th to 14th century although may start earlier..
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-506118
Object type: BROOCH
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Medieval octagonal copper alloy annular brooch with central oval aperture and eight straight outer sides dating to the period c. 1200 - 1400. The frame is flat with a pin constriction at the centre of one of the sides There is small notch in the outer edge of the frame on either side of the pin bar. An oval cross sectioned copper alloy pin survives in situ looped over the constriction at one and and terminating in a rounded point at the other. The pin is even in width throughout its length. The front of the brooch is decorated around the entire circumference with a recessed cent…
Created on: Tuesday 25th February 2020
Last updated: Thursday 5th March 2020
Spatial data recorded. This findspot is known as 'Beercrocombe', grid reference and parish protected.

Record ID: SOM-A865D2
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation
Roman copper alloy barbarous radiate copying a coin of Postumus, Victorinus or Tetricus I, dating to AD 275-285 (Reece period 14). Possibly VIRTVS AVG reverse type depicting a soldier right with spear and shield. Mint unclear. The coin is chipped around the edges.
Created on: Monday 17th February 2020
Last updated: Monday 2nd March 2020
Spatial data recorded. This findspot is known as 'Othery', grid reference and parish protected.

Record ID: SOM-A626BA
Object type: COIN
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A Post- Medieval copper Royal farthing token of Charles I (AD 1625-1649) dating to AD 1636-1643. Rose farthing class 2. Unclear initial mark. London Mint. North (1991, 165) No 2291.
Created on: Monday 17th February 2020
Last updated: Thursday 27th February 2020
Spatial data recorded. This findspot is known as 'Stawell CP', grid reference and parish protected.

Record ID: SOM-2A0B19
Object type: BRACELET
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Roman copper alloy bracelet dating to cAD 300 to 400. The bracelet is formed of a strip of copper alloy which has been bent into an irregular U-shape. One end is complete and narrows to catch and the other finishes in a straight, patinated break. The catch is formed of a hook; the hook is narrower than the main bracelet with a thin initial section then a thickened terminal which is round in plan and triangular in profile with the upper edge of the triangle slightly hooked over. The front of the bracelet is decorated with an incised line borders running parallel to both …
Created on: Tuesday 11th February 2020
Last updated: Thursday 26th March 2020
Spatial data recorded. This findspot is known as 'Box', grid reference and parish protected.