Record ID: SUSS-9BBFB1
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Part of an unidentified copper-alloy object. The remaining piece has a side bar 51.5mm long, with a rectangular cross section and a terminal in the form of a two-lobed fleur; projecting from beneath this fleur, and on the same plane, is the remnant of a sub-trapezoidal element, measuring 16.9mm long and with an uneven bottom edge which suggests the former existence of openwork decoration. The object is 4mm thick and weighs 12.4g. It is similar in form to the 17th century double-loop trapezoid buckles with openwork decoration, but appears too large for this use and may therefore be a c…
Created on: Monday 18th February 2008
Last updated: Friday 26th April 2019
Spatial data recorded.

Record ID: SOM-ED5524
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
Fragment of a copper alloy object of possible Roman date. The object consists of a pointed drop-shaped element with a tip turned out at 30 degrees angle. The tip and the opposite side are now missing due to old breaks. Both the front and the reverse side are decorated: half of the face has three longitudinal grooves which leave three thin raised lines; the other half is concave on both sides. The object has a brown-green patina with traces of corrosion. It measures 25.8 mm in length, 15.4 mm in width, 4.8 mm in thickness and weighs 4.68 g. Without knowing what the object is, it …
Created on: Monday 30th July 2018
Last updated: Thursday 2nd August 2018
Spatial data recorded.

Record ID: SOM-902166
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
A small copper-alloy flat disc of probable post-medieval date (c. 18th or 19th century AD). The piece is corroded, with the only decoration discernible with any clarity being the letters VM, both with serifs.
Created on: Thursday 24th October 2013
Last updated: Thursday 24th October 2013
Spatial data recorded. This findspot is known as 'Sampford Peverell CP', grid reference and parish protected.

Record ID: WAW-C07509
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Worcestershire
Workflow stage: Awaiting validation
Roman to Post Medieval (1st to 19th century) unidentified object: The artefact is a large lead oval ball with a flattened upper and lower edge with multiple, equi-distant six circular iron studs around the side, one iron stud on one flat surface and two on the lower face. The iron is in a stable condition and the lead has a matte light grey/cream coloured surface. It measures 43.69mm diameter, 28.41mm thick and weighs 230g. A similar object is recorded on the PAS database, SUSS-158547, and the Finds Liaison Officer wrote 'The purpose and age of the object is unclear. Suggestions in…
Created on: Friday 19th September 2014
Last updated: Friday 19th September 2014
Spatial data recorded.

Record ID: SOM-EA36CA
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
Part of a cast copper-alloy object of unknown type, probably medieval in date. The remaining fragment is curved (C-shaped) and of a broad and slightly flattened D-shaped cross-section with a flat back, almost vertical inner side (inner side of the curve) and convex front and outer side. The object tapers along its length, being slightly wider at one end than the other and both ends terminate in old breaks. The object is worn and corroded. The object is 46.8mm long and the maximum curvature is 18mm (i.e. from the centre of the convex side to an imaginary line joining the two ends…
Created on: Thursday 23rd August 2018
Last updated: Tuesday 18th September 2018
Spatial data recorded.

Record ID: SOM-4A3D7A
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Somerset
Workflow stage: Awaiting validation
One fragment of worn, sub-angular translucent crystalline calcite with flat cleavage planes visible on three axis and worn, smoothed, sides. Probably naturally formed: no evidence seen for artificial shaping. 29.1mm by 28.3mm by 20.2mm and 24.39g in weight. Although natural and potentially local as calcite does form in limestone the piece was picted out by the finder as unusual in the field. It was found in an area that has produced worked flint of Mesolithic to Bronze Age dte with a focus in the Neolithic and might be associated with the flint as a deliberately selected and…
Created on: Wednesday 1st April 2020
Last updated: Wednesday 1st April 2020
Spatial data recorded. This findspot is known as 'Chewton Mendip CP', grid reference and parish protected.

Record ID: SOM-859CB8
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Awaiting validation
An unidentified copper alloy sub-oval object, possibly part of a dagger or sword pommel of likely Post-Medieval date or a walking stick top. The object is a hollow dome, with a stretched oval plan, more pointed (narrower) at one end than the other, and D-shaped profile. At the apex of the dome is a circular perforation (c.7.2mm diameter). The object is highly abraded, but appears to survive to its original edge around much of its circumference, The inner surface of the object is plain however the outer surface has moulded decoration that is symmetrical, barring abrasion, through…
Created on: Thursday 18th April 2019
Last updated: Tuesday 23rd April 2019
Spatial data recorded.

Record ID: HAMP-3161D5
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Hampshire
Workflow stage: Awaiting validation
An artefact of uncertain function consisting of a lead core capped with a sheet copper-alloy dome at one end. The main leaden element is corroded and abraded, but broadly cylindrical and is able to sit on its flat, sub-circular base. The other end is shallowly domed and covered with copper-alloy sheeting, abraded at its circumference. At its summit it appears to be perforated, although this is unclear, as is its purpose. The object may have acted as a weighted terminal to something rather than a weight in its own right. The copper alloy cap has a variable mid-green colour.
Created on: Friday 14th September 2012
Last updated: Tuesday 12th February 2013
Spatial data recorded.

Record ID: SOM-42E9C7
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An unidentified copper alloy object of possibly Post Medieval in date. The object is formed of a strip of copper alloy which has been bent into a C-shape. The strip has a D-shaped cross section, with the flat face being external. This terminates in a leaf-shaped (pointed oval) terminal, the internal face of which is convex with an integrally moulded shallow boss, whilst on the reverse of this is a circular recess, giving the external face a concave appearance. On the other end of the strip, just after the bend of the C, the convex edge expands to create a thickened section with a r…
Created on: Monday 27th February 2017
Last updated: Wednesday 1st March 2017
Spatial data recorded. This findspot is known as 'Stogumber CP', grid reference and parish protected.

Record ID: DOR-3BB529
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A medieval to post medieval cast copper-alloy fragment of a swivelling attachment fitting (possibly harness fitting) dating to 1250 to 1700 AD. The object probably swivelled at one end, has one attachment hole and traces of gilding. There is a break to the left side termination. Length:17.4mm. Width: 8.8mm. Thickness: 10.2mm. Weight: 4.07g.
Created on: Thursday 23rd March 2017
Last updated: Thursday 31st January 2019
Spatial data recorded.

Record ID: SOM-4D0C5B
Object type: UNIDENTIFIED OBJECT
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A piece of probably Early Medieval copper alloy thin decorated sheet. The piece is broadly triangular with a slightly convex curved long edge, one shorter concave curved side and an old break along the other edge. The front of the plate is gilded and has a inscribed decoration in the form of a 'celtic trinity knot' or trinquetra formed by the interlace of three pointed ovals. The long edge of the plate is bordered by a inscribed line and there is the start of a similar line by the broken edge. It is probable the short curved edge broke along a similar incised line.The back of the plat…
Created on: Monday 17th October 2016
Last updated: Thursday 15th December 2016
Spatial data recorded. This findspot is known as 'West Knoyle CP', grid reference and parish protected.

Record ID: WAW-319644
Object type: UNIDENTIFIED OBJECT
Broad period: POST MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
An incomplete worn unidentified object, possibly a knife handle of uncertain date. The handle is incomplete, a complete although slightly worn loop survives at the tip. The main body is square in cross section which tapers towards the old break. Internally there is a circular shaped perforation. The artefact is 44.4mm in length, 10.9mm thick and weighs 16.9 grams.
Created on: Tuesday 3rd January 2012
Last updated: Tuesday 3rd January 2012
Spatial data recorded.

Record ID: HAMP-6A2BF3
Object type: TUMBREL
Broad period: MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper-alloy artefact of medieval date: probably the terminal fragment from a tumbrel, or coin balance (c. 14th century AD). The arm is perpendicular to the rectangular terminal (tray) and has broken at the perforation that would have taken the axis bar. The arm is bent backwards and is broken at both ends of the perforation (L.: 8.8mm, W.: 4.7mm, Th.: 3.2mm). The tray is rectangular, thin and flat, apart from a moulding just below the loop. This moulding is a raised transverse rectangle with central transverse removal (Th.: 2.8mm): alternatively, two rectangular ridges. The fi…
Created on: Wednesday 5th December 2007
Last updated: Tuesday 22nd May 2012
Spatial data recorded.

Record ID: SOM-D7E1B2
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A probable lead alloy fragment of a Post Medieval to Modern toy gun. The object is triangular in plan with curving sides and a flattened point. The point end is closed but the opposite end is open and was probably attached to the wooden section of the toy gun. Both faces have moulded decoration showing what appears to be leaves and/or flowers within a border of raised lines. There is a lobed knop projecting down from one of the sides. It is likely to be the butt from a toy gun. It measures 52.4mm in length, 26.7mm in width, 11.8mm in thickness and weighs 30.4g.
Created on: Thursday 6th October 2011
Last updated: Wednesday 15th February 2012
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.

Record ID: SOM-E63B28
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete post medieval lead toy probably a whistle dating to the period c. AD 1600 - 1800. The toy commences in an old break and is cylindrical with a hollow circular cross sectioned interior and a hexagonal external cross-section. The internal diameter of the toy is 9.07mm tapering to 3.88mm at the opposite end. The toy exhibits a series of irregular raised mouldings running down the sides of the body, probably a decorative pattern which is now unclear, there appears to be curved foliate designs near the break. There is a pronounced, tidied, casting seam along both sides of the …
Created on: Tuesday 21st July 2015
Last updated: Thursday 23rd July 2015
Spatial data recorded.

Record ID: SOM-CA72E2
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
An incomplete cast lead-alloy figurine dating to the Post-Medieval period. The object is a flat figure moulded on one side and smooth on the other. It can therefore be classified as Forsyth and Egan, Type 3. The figure appears to be male, in military dress with baggy breeches and a fitted, sleeveless jerkin or waistcoat over a jacket or chemise with baggier sleeves and a plain cuff. The jerkin has buttons with braid frogging. The legs are missing below knee level. The face is also missing but the remnants of a high collar or ruff are suggested. The trousers and sleeves are depicted wi…
Created on: Thursday 26th September 2019
Last updated: Thursday 26th September 2019
Spatial data recorded. This findspot is known as 'Cheddon Fitzpaine CP', grid reference and parish protected.

Record ID: SOM-CB6026
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post medieval cast copper alloy toy cannon. The muzzle (open end) of the cannon is missing to an old break. It is cast in one piece with a pronounced base ring and a plain tapering breech. The cascabel is also missing to an old break. The small vent hole, blocked with mud, is half way between the base ring and first reinforce ring. The barrel is corroded but appears to have recessed rings either side of the trunnions. The trunnions are circular in section, both are missing their ends, one is just a stub. The total width of the cannon across the trunnions is 16.1mm. Between the first a…
Created on: Wednesday 23rd May 2012
Last updated: Wednesday 23rd May 2012
Spatial data recorded. This findspot is known as 'St Cuthbert Out CP', grid reference and parish protected.

Record ID: SOM-9ECAA5
Object type: TOY
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Copper alloy toy cannon of probable 18th-century date cast in one piece, with part of the gun carriage attached. The cascabel at the breech (closed end) of the cannon is almost flat, just slightly convex with a button projecting from it; the button has a long circular sectioned stalk ending in a slightly flattened sub-spherical head. Adjacent to the cascabel is a pronounced raised base ring. Its vent hole is small, circular, (probably drilled) and near the cannon's breech; there is no vent ring. The second reinforce, a raised ring, is placed 18.9mm from the cannon's muzzle. From th…
Created on: Friday 7th March 2014
Last updated: Wednesday 19th March 2014
Spatial data recorded. This findspot is known as 'Bishop's Hull', grid reference and parish protected.

Record ID: HAMP-673B93
Object type: TOY
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A slightly corroded and bent post-medieval lead-alloy toy watch. The object is circular and bifacially moulded in low relief. Within a wide border is a symmetrical design of four lozenges between stylised flowerheads and ring-and-dot motifs. The sides of the lozenges are concave. The inner part of the border design touches the chapter ring which is marked with the Roman hours I-XII with pellet half-hour marks. The plain dial centre is enclosed within another pellet border. The single hand with counterpoise and arrowhead pointer is at 12 o'clock. The design is repeated on the other sur…
Created on: Monday 12th December 2011
Last updated: Tuesday 13th December 2011
Spatial data recorded. This findspot is known as 'Ringwood CP', grid reference and parish protected.

• 

  Image not taken

Record ID: BERK-749F94
Object type: TOY
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A lead alloy toy or miniture vase, dating from the post-medieval to modern period. The miniture is incomplete with two-thirds of the upper edge missing; the vase is hexagonal with splayed rim and a pedistal base. 17th-18th century AD.
Created on: Tuesday 13th December 2011
Last updated: Monday 11th August 2014
Spatial data recorded.