Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 001422EDE4401AC3
    • Page: 5
    • Sort: broadperiod

  • Thumbnail image of SUSS-CA89D6

Record ID: SUSS-CA89D6
Object type: COIN
Broad period: ROMAN
County: West Sussex
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy contemporary copy (barbarous) radiate of unclear emperor, possibly priestly implements reverse type, 275-285 AD
Created on: Thursday 1st January 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'near Goring by Sea', grid reference and parish protected.


  • Thumbnail image of SOM-5312B5

Record ID: SOM-5312B5
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy Roman brooch of initial T-shaped type. The head has two short, tubular wings with a central slot in which the pin head hinges. A wire, probably copper alloy, runs through these wings; white paste visible in the end of one wing is probably solder holding it in place. The wings have two incised lines at the ends, one wing has suffered a small amount of damage so that only one line remains. The head of the pin is a copper alloy plate, with a piercing to allow the wire within the wings to pass through, securing it in place and allowing it to hinge. This plate …
Created on: Thursday 17th November 2011
Last updated: Saturday 19th November 2011
Spatial data recorded. This findspot is known as 'Chewton Mendip', grid reference and parish protected.


  • Thumbnail image of SOM-A3FC46

Record ID: SOM-A3FC46
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman cast copper alloy T-shaped brooch of standard form but unusually small size. The head is formed of two tubular, circular sectioned wings flanking a central slot. Within the hole through the wings is a copper alloy wire forming an axis bar on which the pin still freely hinges in the slot. One wing is broken at the end, the break is old and worn and exposes the axis bar. The pin is copper alloy with a flat D-shaped head, pierced to accept the wire. From one corner of the head extends the integral circular sectioned wire pin. The pin tapers in thickness from the head and is broken …
Created on: Monday 21st November 2011
Last updated: Monday 21st November 2011
Spatial data recorded. This findspot is known as 'Kingsdon', grid reference and parish protected.


  • Thumbnail image of SOM-A5A846

Record ID: SOM-A5A846
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman cast copper-alloy initial T-shaped brooch with hinged pin dating to c. AD 60-100. The brooch head has open-ended cylindrical wings, 30.6mm wide, containing a circular-sectioned axis bar for the hinge. One end is almost closed apart from the tip of the bar, which appears to be iron; the other end is filled with a white substance, probably solder. The wings are each decorated with two pairs of U-sectioned transverse grooves flanking a broader central U-sectioned groove. There is a large transverse slot through the centre of the underside of the head, between the wings, where the p…
Created on: Monday 21st November 2011
Last updated: Monday 21st November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Thumbnail image of SOM-A6A8A1

Record ID: SOM-A6A8A1
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Head and bow of a devolved T-shaped brooch of local type with a slightly expanded fan shaped head plate. The head is a flat fan (shallow D shaped) plate. At the top of the curve of the fan is a thinner projecting tab, probably the remains of a loop, now broken close to the plate. Along the straight lower edge of the plate is a cylinder with a central slot. The cylinder held the bar on which the pin hinged, pivoting in the slot. There is iron corrosion visible in the slot and the ends of the cylindrical wings suggesting the hinge was made of iron. At one end is traces of the white subs…
Created on: Monday 21st November 2011
Last updated: Wednesday 27th June 2012
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Thumbnail image of SOM-A6B8D6

Record ID: SOM-A6B8D6
Object type: BROOCH
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Lower part of the bow and foot of a Roman bow brooch. The bow is D-shaped in section with a raised rib running down the front ending in a transverse raised line at the foot. It is 3.4mm wide at the old break at the top and 3.2mm wide bust above the terminal. The terminal at the foot has rounded lobes flanking the plain foot and separated from it by the narrow collars between the lobes. At the back is a catchplate with a curved upper edge and a straight lower edge level with the foot. The outer edge is irregular where it would have been bent over forming a catch for the pin. It is 30…
Created on: Monday 21st November 2011
Last updated: Monday 21st November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B60534
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Twenty sherds of Roman Poole-Wareham Black Burnished ware (BB1), 100-410 AD, sixteen body sherds and four rim sherds. The sherds mostly have dark inner and outer surfaces and a slightly lighter inner core; some have re-oxdised to shades from mid-orange to mid-grey from later burning others appear lighter as the darker surface has been lost. A few, mostly the rims, still have traces of burnishing but most are highly abraded with the original surface worn away. The fabric is fairly coarse, with the distinctive cods-roe fracture. It is tempered with abundant rounded quartz (less than …
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B63665
Object type: LID
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Rim sherd of Roman Poole-Wareham Black Burnished ware (BB1), 100-410 AD. The sherd has a dark inner and outer surfaces and a slightly lighter inner core. Extensive burnishing on the inner and outer sides. The fabric is fairly coarse, with the distinctive cods-roe fracture. It is tempered with abundant rounded quartz (less than 2mm), occasional rounded shale (less than 2mm) and possibly some very small fragments of flint. The rim is plain with a rounded top, slightly angled on the inner side, the sides slightly convex, it is too small to estimate the diameter, 13.72 grams. T…
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B51811
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Seven cast lead vessel repairs (pot mends). All have the characteristic H-shaped section with two irregularly shaped outer sides, one larger than the other, joined by a smaller central section. None of them retain any of the original pot in the grrove created between the outer sides. Total weight 70.04 grams. Pot mends of this form are found in both Roman and Medieval periods, as a common way to repair broken pottery vessels. The lack of any vessel material left in the groove means they cannot be dated directly but they are likely to be Roman given the other material on the site.
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Image not taken

Record ID: SOM-B57272
Object type: VESSEL
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Nine sherds of Roman greyware vessels, eight body sherds and one rim sherd. The fabric is mid to pale grey throughout. It is tempered with varying quantities of poorly sorted rounded quartz (less than 2mm), dark iron ore (less than 1mm), and sparse fine mica (less than 0.5mm), with frequent rounded voids (less than 1.5mm). The rim is everted with a rounded outer edge but too short to accurately estimate the diameter.The breaks are mostly very abraded with some fresher breaks. Total weight 37.67 grams.
Created on: Tuesday 22nd November 2011
Last updated: Tuesday 22nd November 2011
Spatial data recorded. This findspot is known as 'Brewham', grid reference and parish protected.


  • Thumbnail image of SOM-1F2651

Record ID: SOM-1F2651
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy sestertius of uncertain emperor, standing figure reverse, unclear mint, 50-200 AD.
Created on: Tuesday 27th September 2011
Last updated: Thursday 6th October 2011
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-2F3E52

Record ID: SOM-2F3E52
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy radiate of uncertain emperor, reverse type and mint. 260-275 AD but possibly 295-310 AD.
Created on: Wednesday 28th September 2011
Last updated: Thursday 7th January 2016
Spatial data recorded. This findspot is known as 'West Pennard', grid reference and parish protected.


  • Thumbnail image of SOM-2C38C3

Record ID: SOM-2C38C3
Object type: COIN
Broad period: ROMAN
County: Somerset
Workflow stage: Awaiting validation Find awaiting validation
Roman copper alloy radiate of uncertain emperor, reverse and mint, 260-285 AD.
Created on: Monday 10th October 2011
Last updated: Tuesday 15th November 2011
Spatial data recorded. This findspot is known as 'Chedzoy', grid reference and parish protected.


  • Thumbnail image of HAMP-3B3114

Record ID: HAMP-3B3114
Object type: FINGER RING
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A thick strip of decorated cast copper alloy bent around into a penannular form, possibly a finger ring of Roman date that was formed from a bracelet. The strip has slightly abraded edges and now has a maximum width of 16.3mm. It has a flat inner side and slightly convex outer face and is 1.9mm thick in the centre. Around the front runs a decorative panel marked by indented lines at the top and bottom. Two further grooves within these create ridge above and below a wider central band. The ends are slightly rounded but do not appear to be the original ends of the strip as the panel run…
Created on: Friday 16th September 2011
Last updated: Tuesday 8th November 2011
Spatial data recorded. This findspot is known as 'Bishops Sutton CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-628437
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and abraded cast lead object with broken iron pronged remains at both apexes - a small Roman steelyard weight. The object is biconical in shape, as typical Roman steelyard weights were (Geake 2001, 67), with iron loops for suspension. The surface is now white with numerous superficial scratches and dents. Given its current mass it is unclear how this weight fits into the Roman weight-system.
Created on: Sunday 18th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded. This findspot is known as 'Hurstbourne Priors CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-62B755
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and abraded cast lead object with vestigial iron pronged remains at both apexes - a Roman steelyard weight. The object is broadly biconical in shape, as typical Roman steelyard weights were (Geake 2001, 67), with iron loops for suspension. The surface is now a light-grey/white colour with numerous scratches and dents. This object now weighs slightly over half a Roman pound.
Created on: Sunday 18th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded. This findspot is known as 'Hurstbourne Priors CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-62DA82
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Hampshire
Workflow stage: Published Find published
A corroded and abraded cast lead object - probably a Roman steelyard weight. The object is broadly circular in plan with a large, corroded iron loop (L.: 23.3mm) off centre on its upper surface. The weight tapers to a broadly oval base (33.2 by 25.7mm); the sides taper to the short ends, while the long sides have been squashed. The base is flat enough for the weight to stand. The surface is now a light-grey/white colour with numerous scratches, dents and areas of cracking. Given its current mass it is unclear how this weight fits into the Roman weight-system.
Created on: Sunday 18th September 2011
Last updated: Wednesday 16th April 2014
Spatial data recorded. This findspot is known as 'Hurstbourne Priors CP', grid reference and parish protected.


  • Thumbnail image of HAMP-702323

Record ID: HAMP-702323
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper-alloy mid 1st century AD Roman dolphin type brooch, as derived from the Colchester type. The brooch has lost the majority of its spring mechanism and concomitant pin; the catch-plate is also very abraded. The head is expanded in an exaggerated way. The wings are shallowly convex, with a shallow concave lower surface. Semicircular removals at their tips hint at plates for retention of an axis bar in the manner of Polden Hill brooches. The corroded remains of ?six iron coils survive in the concave area of the wings' underside. There are two circular perforation…
Created on: Monday 19th September 2011
Last updated: Thursday 22nd September 2011
Spatial data recorded. This findspot is known as 'Seend CP', grid reference and parish protected.


  • Thumbnail image of HAMP-5D0682

Record ID: HAMP-5D0682
Object type: RING
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded, cast copper-alloy ring in the shape of a letter 'C' of uncertain date and function. It has a sub-oval cross-section, being flattened to the wider faces. It tapers to a point at either end; one end has been bent down slightly. The mid-green patina is mostly lost; the object is generally a corroded light-green colour over a red-brown metal. Scratching to reveal the shiny metal internally is assumed to be a recent intervention. Objects of similar form, although generally smaller size, have been recorded on this database and are often interpreted as Roman earrings.
Created on: Sunday 18th September 2011
Last updated: Tuesday 8th November 2011
Spatial data recorded. This findspot is known as 'Binsted CP', grid reference and parish protected.


  • Image not taken

Record ID: HAMP-62C468
Object type: STEELYARD WEIGHT
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A corroded and abraded cast lead object - possibly a Roman steelyard weight. The object is broadly biconical in shape, as typical Roman steelyard weights were (Geake 2001, 67), although it is domed at the base and seems to lack the usual iron loops for suspension. The surface is now a light-grey/white colour with numerous scratches, dents and two significant losses to the conical half. This object now weighs slightly under eleven Roman unciae.
Created on: Sunday 18th September 2011
Last updated: Tuesday 20th September 2011
Spatial data recorded. This findspot is known as 'Hurstbourne Priors CP', grid reference and parish protected.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 1,368
Search server index: objects

You are viewing records: 81 - 100.

Search statistics

  • Total quantity: 1,946
  • Mean quantity: 1.423
  • Maximum: 233

Filter your search

81 - 100 of 1,368 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.