Record ID: SUSS-007854
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, rounded edge. There are three circular-headed rivets on the underside of this curved edge. The rivets can also be seen on the front surface. The front surface is covered with an incised decoration. There is a parallel set of lines running up from the straight edge of the plate. Inside these lines there are three bands of cross-hatched lines, inside borders. Also curving away …
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.

Record ID: SUSS-007DB8
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, trilobite edge. There are four circular-headed rivets on the upper side of this curved edge. The rivets can also be seen on the reverse. The front surface is covered with an embossed decoration. There are three bands of parallel lines running parallel with the straight edge. At the end of this design there is a design resembling a draped pair of curtains, tied at the top. Eit…
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.

Record ID: BH-EC53B6
Object type: CANDLESTICK
Broad period: POST MEDIEVAL
County: Hertfordshire
Workflow stage: Published
An incomplete copper-alloy object, representing a fragment of a candlestick dating to the post medieval period. The object comprises half of a hollow tubular body and an incomplete curving top. The tube is lozengiform in cross section, and tapers towards the top. The top has approximately a quarter of a loop remaining. The bottom edge of the fitting is decorated with a raised horizontal band. The object measures 47.7mm high by 20.3mm from back to front and 10.6mm wide; it weighs 10g. For a parallel, see Egan, G. (2005) Material Culture in London in an Age of Transition: Tudor and Stua…
Created on: Thursday 29th November 2007
Last updated: Monday 24th October 2011
Spatial data recorded. This findspot is known as 'St Albans', grid reference and parish protected.

Record ID: HAMP-AB3643
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete early 16th-century silver post-medieval groat of Henry VII, London mint (1505-1509 AD; North 1747). This coin has been bent and has suffered circumferential cracks and losses.
Created on: Monday 24th November 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Boldre CP', grid reference and parish protected.

Record ID: SUSS-A5D4C1
Object type: TOKEN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
Post Medieval copper alloy token farthing minted for William Smith of Steyning, Sussex in 1667. Williamson Vol 3. p.1182, Sussex No.165. William Smith was a mercer. There is a reference, in Sussex Archaeological Collections 19 p.95, to a William Smith of Steyning who had an estate worth £20 seized by parliment in 1655 because the owner was either a Royalist or a Catholic (the ordnance covered both). This may or may not be the same person as issued the tokens but Williamson suggests it is.
Created on: Thursday 18th December 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Goring by Sea', grid reference and parish protected.

Record ID: SUSS-B663A4
Object type: PIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A broken cast copper-alloy pin with spherical filigree head of early post-medieval date (c. 16th century AD). The pin shaft is circular in cross section with a spherical knop at one end which projects just beyond the pin head. The other end is bent through 45 degrees and broken just below the head. The remainer is 22.1mm long by 1.9mm in diameter. The whole piece weighs 1.94 grams. The head is unusual, in that, unlike other similar examples e.g.HAMP-A136D5, it is hollow with no central ball onto which the filigree was applied. The head is 12.1mm in diameter and divided into hemisphere…
Created on: Wednesday 31st December 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Near Goring by Sea', grid reference and parish protected.

Record ID: IOW-058500
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Published
A complete cast copper alloy mount of post-Medieval date. (c.1600-c.1750). The mount is convex at the front and flat at the rear. In plan it is in the form of a heart with a fleur-de-lis terminal. The side fleurs of the fleur-de-lis curve round to join the ridge and thus have circular holes within. At the rear are two integral tapering spikes, circular in cross-section. Both of these are bent towards the fleur-de-lis end. The mount is generally corroded but patches if a shiny khaki patina survive at the front. The rear face is covered with loose light green copper alloy corrosio…
Created on: Sunday 17th May 2009
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.

Record ID: HAMP-1565A7
Object type: COIN
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A very worn early 17th-century silver post-medieval Irish shilling of James I, First coinage, struck in 1604 (Spink 6513). This coin has been bent twice, perhaps as a love token, and has an S-shaped profile.
Created on: Monday 18th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: HAMP-3AFB14
Object type: SPOON
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
The broken bowl from a cast copper-alloy 17th-century post-medieval spoon. The handle and the majority of the bowl are missing, both from old breaks. The handle is rectangular in cross-section; on the lower surface it tapers to a point at its junction with the bowl. The surviving section of the bowl is shallow and has been bent upwards at the extant terminal, with breaks to each side. There is evidence on the bowl for a circular makers mark, central on the upper surface, which is now unclear but possibly a (Tudor) rose (as with SOM-7C2A26 on this database). The lower surface is plain.…
Created on: Wednesday 17th November 2010
Last updated: Wednesday 17th November 2010
Spatial data recorded.

Record ID: HAMP-37EDB8
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded, plain copper-alloy rivet-like object which might have been used to hold repairs to a vessel in place. It is sub-oval in plan with a possibly break giving a broadly straight edge to one side. On the lower surface there is an integral protruding prong towards this edge whose terminal protrudes to one side and is flattened at the base. Rolled sheet rivets replaced the earlier folded sheet rivets in pot repairs from the late 15th - 16th centuries (Egan 2005, 101) suggesting a possible late medieval to post-medieval date for this piece. It is of a red-brown metal with patches o…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Headbourne Worthy CP', grid reference and parish protected.

Record ID: SOM-388714
Object type: THIMBLE
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval copper alloy thimble formed by soldering copper alloy sheet into a long, slightly tapering cylinder with a separate domed top. The top and a part of the side are missing due to an old, very irregular break and the side has split along the seam, it is squashed inwards slightly at the base. The soldered seam is visible around the top and on the side. The sides are decorated with an irregular hand incised grid of lines leaving a strap work pattern, of two lozenges alternating with two pointed ovals, in reserve. There is a plain ring at the base. It is now 18.8mm by 15.3mm a…
Created on: Monday 29th November 2010
Last updated: Wednesday 1st December 2010
Spatial data recorded. This findspot is known as 'Otterhampton', grid reference and parish protected.

Record ID: BERK-621BE7
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp that retains an iron rivet, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.

Record ID: BERK-624D97
Object type: CLASP
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast copper alloy toggle clasp, dating to the 16th / 17th century. The mount is triangular in form with two open circles cut out from each long side at the top and bottom. There is a three-pronged crown design on each side between these open circles, with a central circular hole between for decoration. There is one rivet hole towards the base of the clasp, the base is crenellated while the peak has a rounded knop which would have slotted into a clasp attachment, now missing. The clasp would have been one of two opposite each other with a clasp attachment in the centre of t…
Created on: Wednesday 1st December 2010
Last updated: Wednesday 8th December 2010
No spatial data available.

Record ID: HAMP-CCA317
Object type: COIN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
An extremely worn, clipped and bent 16th-century silver post-medieval coin: possibly a halfgroat of Elizabeth I struck at London (c. 1583 - c. 1603 AD; possibly North 2016). This coin has suffered some circumferential losses.
Created on: Monday 6th December 2010
Last updated: Tuesday 7th December 2010
Spatial data recorded.

Record ID: DEV-6032C3
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Devon
Workflow stage: Published
A post-medieval copper-alloy 17th-century trade token farthing issued by Alexander Peake of Topsham, Devon. Dickinson (1986, 50) Devon no. 339B (reassigned from Williamson (Surrey) no. 70, where it was assumed to relate to Epsom), dated 1655 (on token). It measures 15 mm in diameter.
Created on: Monday 13th December 2010
Last updated: Tuesday 6th December 2016
Spatial data recorded.

Record ID: CORN-DA5526
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Published
A post-medieval copper-alloy 17th-century trade token farthing issued by Alexander Peake of Topsham, Devon. Dickinson (1986, 50) Devon no. 339B (reassigned from Williamson (Surrey) no. 70, where it was assumed to relate to Epsom), dated 1655 (on token). It measures 14.8 mm in diameter, 0.6 mm in thickness and weighs 0.67 g
Created on: Wednesday 12th January 2011
Last updated: Tuesday 6th December 2016
Spatial data recorded.

Record ID: WILT-02BF51
Object type: HINGE
Broad period: POST MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A Post-Medieval (1500-1700) copper alloy decorative hinge from either a box or possibly a book fitting, folded on top of itself. It measures 23.92x12.50x4.13mm and weighs 2.7g. The object consists of two openwork halves c.1mm thick with what appears to be a shorter, flat spike sandwiched between. One half terminates in a fleur-de-lis a small rivet hole (1.3mm diameter) at the farthest point. Below this is an inverted, rather angular, heart-shaped openwork at the base of which is another rivet hole, complete with iron rivet corroded in place. Below is the c.4x2.5mm are of 'hinge' f…
Created on: Wednesday 26th January 2011
Last updated: Thursday 3rd February 2011
Spatial data recorded. This findspot is known as 'Chippenham', grid reference and parish protected.

Record ID: DUR-1BB843
Object type: TOKEN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy traders token, 17th century. Obv; Square shield, chevron dividing, above two stag heads, below unclear; LANCELOT WILLIAMSON Rev; 1666; GROCER IN RIPPON Williamson, Yorkshire, p.1336, no.288
Created on: Thursday 27th January 2011
Last updated: Tuesday 1st February 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP-815D50
Object type: SHOT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded small lead-alloy ball with attached sprue: shot of post-medieval date. The sprue extends for 2.9mm at a diameter of 5.7mm before expanding to 6.6mm at the point of break. The sphere is small enough to be pistol shot.
Created on: Tuesday 1st February 2011
Last updated: Tuesday 1st February 2011
Spatial data recorded. This findspot is known as 'Medstead CP', grid reference and parish protected.

Record ID: LANCUM-D55A16
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
Cast cu-alloy coin weight for an ecu au soleil (French gold denomination). It depicts a radient sun in the centre of the shield on the obverse and was issued between c. AD1475-1654. Withers suggest this form is an English type (1994, 39).
Created on: Thursday 17th February 2011
Last updated: Monday 10th April 2017
Spatial data recorded. This findspot is known as 'Mawdesley', grid reference and parish protected.

Record ID: HAMP-2BEC46
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded fragment from a cast copper-alloy hooked mount of post-medieval date. The fragment consists of the lower part of the mount, including the hook and the lower part below a rivet hole. Within this lower rivet hole corroded remains of an iron rivet. The sides of the mount are scalloped with rounded protrusions to the sides. The inward-turning hook has been bent slightly to one side as a result of old damage. The metal has corroded to a red-brown colour with larges areas of light-green and off-white corrosion product.
Created on: Monday 21st February 2011
Last updated: Tuesday 22nd February 2011
Spatial data recorded. This findspot is known as 'Kings Worthy CP', grid reference and parish protected.

Record ID: HAMP-CE5F95
Object type: CLOTH SEAL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A worn and incomplete cast lead cloth (alnage) seal of post-medieval date. Only one of the possible pair (or more) of discs survives. In low relief it is inscribed with the following lettering: '4 (inverted)? II//I M'. The other surface is plain. The angular sides of the seal suggest that it may have been cut deliberately.
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Overton CP', grid reference and parish protected.

Record ID: HAMP-D002C5
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete sub-rectangular cast copper-alloy mount of post-medieval date. The object is flat with a main rectangular body which incurves at one end to a width of 4.4mm before an old break; it appears to be truncated at the other end due to old damage. Before the end narrows there is a pair of double transverse grooves on the upper surface between which possible decoration within a rectangular field now obscured by corrosion. The main body beyond has grooves running just inside the long edges. The field within appears plain, again perhaps a product of corrosion, apar…
Created on: Tuesday 1st March 2011
Last updated: Wednesday 2nd March 2011
Spatial data recorded. This findspot is known as 'Broughton CP', grid reference and parish protected.

Record ID: SOM-3FDBB7
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval, 17th century, cast copper alloy openwork mount with integral attachment spikes. The mount is flat and shaped into four lobes, two large pointed oval lobes alternating with two smaller circular lobes. The tip of one of the pointed oval lobes is lost, possibly to damage. The lobes have circular holes in the centre and there is a further hole in the centre of the mount; the holes in the pointed oval lobes join the central hole while those in the circular lobes are connected to it by an indent on the front. On the back are two integral spikes, one is complete and bent inwar…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.

Record ID: SOM-400FE3
Object type: BRIDLE FITTING
Broad period: POST MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
Post Medieval, 17th century, cast copper-alloy circular bridle boss. The boss is a hollow hemisphere, with an openwork design and a flat border around the edge. A break to one side has removed part of the border and one of the pair of rivet holes. The boss has a raised central knop, around which is the openwork main body, consisting of slim curving arms. The less worn arms are decorated with a scale like patten of raised semi-circles running down each arm and incised lines down their inner sides which continue at the base to meet the base of the next arm. Around this is a narrow rop…
Created on: Sunday 6th March 2011
Last updated: Monday 7th March 2011
Spatial data recorded. This findspot is known as 'North Petherton', grid reference and parish protected.

Record ID: DOR-0A0B35
Object type: COIN
Broad period: POST MEDIEVAL
County: Dorset
Workflow stage: Awaiting validation
Silver halfgroat of James I, Third coinage, Rose issue mark. Mint of London. Reference: North Volume II, No. 2127. Date: Post-medieval - 1620- 1621. Diameter: 15.15 mm Weight: 0.92 g
Created on: Monday 28th March 2011
Last updated: Thursday 14th April 2011
Spatial data recorded. This findspot is known as 'Fifehead Magdalen', grid reference and parish protected.

Record ID: DENO-1188E1
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Medieval to post Medieval cast copper alloy probable swivel. The item consists of a central barrel like part with incised decoration with a cast circular hoop for attachment at each end. Although seemingly formed of two halves with a seam running around the middle of the barrel part there is presently no movement. The exact use of the item is uncertain and it is therefore classified broadly as a strap fitting. The fitting has been dated c.1400-1700.
Created on: Tuesday 29th March 2011
Last updated: Friday 24th January 2014
Spatial data recorded. This findspot is known as 'Hawton', grid reference and parish protected.

Record ID: DENO-11C9C1
Object type: SWORD BELT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post Medieval cast copper alloy sword belt fitting. The fitting consists of a plate with a curved hook at one end with spherical finial. The plate is decorated with an incised curvilinear floriate design. The plate has two circular rivets at the top and bottom. Fittings of this type are dated c.1550-1650.
Created on: Tuesday 29th March 2011
Last updated: Friday 24th January 2014
Spatial data recorded. This findspot is known as 'Hawton', grid reference and parish protected.

Record ID: DENO-30C120
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
Post Medieval Coin Weight: Complete cast copper alloy coin weight. The weight is a square flat disc decorated on both sides. One side carries the design of a crowned rose with the letters EC to either side. the other side probably shows a scallop shell with the letters GG above. This coin weight was continentally produced for the English market. GG is the mark of Gerrit Greers of Amsterdam. The weight weights1ozt. This coin weight is dated to c.1600-1630.
Created on: Wednesday 30th March 2011
Last updated: Thursday 27th September 2012
Spatial data recorded. This findspot is known as 'Gunthorpe', grid reference and parish protected.

Record ID: HAMP-5EB3E0
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy post-medieval plain double-looped buckle frame. The frame is missing one of its loops after an old break at the pin bar. The surviving loop is trapezoidal, with a flat lower surface and an upper surface which is bevelled externally. This gives the frame a triangular cross-section, while the pin bar is semi-circular in section. There is a knopped protrusion at each end of the pin bar. Traces of orange corrosion product at one end of the pin bar suggest that the pin may have been made of iron. The frame has a dark-grey surface where it survive…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5EF961
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy double-looped buckle frame of medieval to early post-medieval date. The frame was formed of two conjoined ovals such that the sides incurve. The frame is bevelled both internally and externally on the upper surface, the latter more shallowly; the lower surface is flat. The pin bar thus has a trapezoidal cross-section. The pin is now largely missing, apart from the orange/brown corroded mass, the remnant of the iron pin. The buckle frame has a variable mid-green colour but is mostly covered in off-white corrosion product. Buckles of this size…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

Record ID: HAMP-5FC754
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A corroded and incomplete cast copper-alloy hooked mount of post-medieval date. The mount is sub-trapezoidal in plan with a cusped upper edge. It tapers towards the hook (now missing), widening slightly just above the hook; the mount has broken as the hook begins. The mount is broadly flat with slight bevelling on its upper surface. It features two iron rivets, one towards the upper edge, the other just below the centre of the plate. Much of the upper rivet survives corroded in place. The copper alloy is covered in an off-white corrosion product over a mid-green metal. Comparable hook…
Created on: Friday 1st April 2011
Last updated: Thursday 7th April 2011
Spatial data recorded.

• 

  Image not taken

Record ID: HAMP-F2CC91
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A cast lead pot mend, used to mend a broken vessel in order to lengthen the period of use after damage had occurred. It is sub-circular and slightly curved in profile, with the section above the slot slightly misaligned to that below. The vessel is also curved and c. 3.5mm thick. Its dark orange-brown colour suggests that this is a corroded iron cooking vessel, of early post-medieval date.
Created on: Friday 8th April 2011
Last updated: Tuesday 12th April 2011
Spatial data recorded. This findspot is known as 'Bishops Waltham CP', grid reference and parish protected.

Record ID: BERK-ACF1D2
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A square trader's token issued by William Burges of Buckinghamshire in (AD) 1670. The token depicts a turbaned man pouring coffee, flanked by the date, 1670. The reverse has five lines of Script: William / Burges in / Aili[] / his half / Peny. Other 17th century square tokens often held the value of a halfpenny. Buckinghamshire 8A in Berry and Morley (1973, 99). Thanks to Laura Burnett for the ID.
Created on: Wednesday 12th May 2010
Last updated: Tuesday 27th August 2019
Spatial data recorded.

Record ID: SUSS-C159B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A Post-Medieval, cast, copper alloy mount. The mount has a flat plate and is slightly heart shaped with one end tapering and folding underneath to form a hook. The reverse is flat except for the hook and a protruding stud, both of which have been integrally cast. The stud is 5.1 mm high and 5.5 mm in diameter. The metal is a brownish-red colour with an irregular formation of a green patina in some places. The mount is 12.3 mm at its widest point, and 19.3 mm long; it weighs 1.97 g. Read (1988) Fig 17 no.6 illustrates a similar hooked fitting with attachment studs. He dates…
Created on: Thursday 13th May 2010
Last updated: Monday 17th May 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.

Record ID: SUSS-C4E707
Object type: COIN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval silver threepence of Elizabeth I (1558-1603), initial mark Eglantine, 1573-8 AD, probably dated 1576 AD on coin (possibly 1573 or 1575 AD), North 1998
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-C51D97
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A cast lead-alloy circular uni-faced token with three visible casting spruces at the cardinal points. The token has a raised design of the initial 'E' on one side, the other side is blank. It is 21.20mm in diameter, 1.85 mm thick and weighs 4.8 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date, 1500-1850 AD.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-CEEDF7
Object type: COIN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval silver penny of Elizabeth I (1558-1603), initial mark probably Eglantine, issued 1574-8 AD, North 2001. About a tenth of the flan is lost to an irregular break down one side.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUR-D13AD4
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A trader's token issued by William Joyce of Salisbury WILLIAM IOYCE/ A camel couchant IN SARVM 1652/ W I
Created on: Wednesday 26th May 2010
Last updated: Wednesday 26th May 2010
Spatial data recorded.

Record ID: SUSS-D20B62
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. On the obverse is a three quarter lengh portrait of James I with the legend: I R BRI all encircled by a pellet border. On the reverse is XIs (for 11 shillings) under a crown within a plain line circular border, over stamped with a crowned I to upper left. This is a British made weight for revalued Double Crown (half unite) of James I, 2nd coinage (Withers and Withers 1995:13). It is 14.52mm square by 3.35mm thick; it weighs 4.5 grams, 70 grains. A full weight double crown of the period 1604-1619 weighed 77.5 grains…
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.