Record ID: SUSS-CECC26
Object type: SPINDLE WHORL
Broad period: UNKNOWN
County: East Sussex
Workflow stage: Awaiting validation
Cast lead alloy decorated spindle whorl. The whorl is circular with a flat base and domed top, slightly flattened in the centre, and a circular hole running through the centre. The upper side is decorated with raised lines radiating out from the central hole, these are thought to help the spindle work as well as be decorative. It is 32.7 mm in diameter and 11.6 mm thick; weights 52.5 grams. Locally cast lead spindle whorls were in use from the Roman to Post Medieval period and are hard to date precisely.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-DEEDF4
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
A 4th century copper alloy Roman nummus of Constantine I (306-337 AD). Reverse type VICTORIAE LAETAE PRINC PERP. Probably London mint; RIC VII, p. 106, c.f. 154. Reece Period 16.
Created on: Friday 31st December 2010
Last updated: Wednesday 18th September 2013
Spatial data recorded.

Record ID: SUSS-C241D1
Object type: VESSEL
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
Cast lead vessel repair (pot mend). Oval with two irregularly shaped outer sides joined by a smaller central section. In the groove created between the outer sides there are traces of the original pot. The pottery appears to be of sandy dark orange fabric. It is 36.8 mm by 32.6mm, 10.2 mm thick and weighs 48.07 g. Pot mends of this form are found in both Roman and Medieval periods, as a common way to repair broken pottery. The remains of the original pot seem to be Roman in date although it is too fragmentary to be completely certain.
Created on: Thursday 13th May 2010
Last updated: Monday 17th May 2010
Spatial data recorded. This findspot is known as 'Udimore', grid reference and parish protected.

Record ID: SUSS-A42136
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
Roman copper alloy sestertius of unclear emperor, reverse type and mint, 1-250 AD
Created on: Saturday 5th June 2010
Last updated: Saturday 5th June 2010
Spatial data recorded. This findspot is known as 'Ticehurst', grid reference and parish protected.

Record ID: SUSS-A43FB3
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
Roman copper alloy dupondius of unclear, probably 2nd century, emperor, unclear reverse type and mint, 100-250 AD
Created on: Saturday 5th June 2010
Last updated: Saturday 5th June 2010
Spatial data recorded. This findspot is known as 'Ticehurst', grid reference and parish protected.

Record ID: SUSS-1F5AB1
Object type: PLAQUE
Broad period: ROMAN
County: East Sussex
Workflow stage: Published
Small gold appliqué decorated with curvilinear filigree wire. The plaque comprises a thin piece of sheet gold forming an extended rectangle in two decorative 'halves', with each of the shortest sides cut to form a 'V' shape. There is a small circular perforation at each corner, as well as an additional perforation below one of the corner perforations; other holes appear to be wear and tear. The appliqué is decorated with fine applied filigree wire, which forms a continuous border around the whole outer edge (although it is broken and missing in a few places). The inner part of the d…
Created on: Tuesday 30th September 2008
Last updated: Thursday 15th September 2011
Spatial data recorded. This findspot is known as 'Alciston', grid reference and parish protected.

Record ID: SUSS-943915
Object type: COIN
Broad period: ROMAN
County: East Sussex
Workflow stage: Awaiting validation
Roman copper alloy nummus of Constantine I (306-337 AD), BAETA TRANQVILLITAS (Altar with globe on the top) reverse, mint unclear, AD 318-324.
Created on: Tuesday 11th May 2010
Last updated: Thursday 13th May 2010
Spatial data recorded. This findspot is known as 'Alfriston', grid reference and parish protected.

Record ID: SUSS-007854
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, rounded edge. There are three circular-headed rivets on the underside of this curved edge. The rivets can also be seen on the front surface. The front surface is covered with an incised decoration. There is a parallel set of lines running up from the straight edge of the plate. Inside these lines there are three bands of cross-hatched lines, inside borders. Also curving away …
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.

Record ID: SUSS-007DB8
Object type: CLASP
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
One half (the hook part) of an 18th to early 19th century stock clasp. One of the outer edges is straight with a rectangular hook on the underside. The opposite edge then flares outwards and forms a much wider, trilobite edge. There are four circular-headed rivets on the upper side of this curved edge. The rivets can also be seen on the reverse. The front surface is covered with an embossed decoration. There are three bands of parallel lines running parallel with the straight edge. At the end of this design there is a design resembling a draped pair of curtains, tied at the top. Eit…
Created on: Friday 1st June 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Firle', grid reference and parish protected.

Record ID: SUSS-C159B2
Object type: MOUNT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A Post-Medieval, cast, copper alloy mount. The mount has a flat plate and is slightly heart shaped with one end tapering and folding underneath to form a hook. The reverse is flat except for the hook and a protruding stud, both of which have been integrally cast. The stud is 5.1 mm high and 5.5 mm in diameter. The metal is a brownish-red colour with an irregular formation of a green patina in some places. The mount is 12.3 mm at its widest point, and 19.3 mm long; it weighs 1.97 g. Read (1988) Fig 17 no.6 illustrates a similar hooked fitting with attachment studs. He dates…
Created on: Thursday 13th May 2010
Last updated: Monday 17th May 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.

Record ID: SUSS-C4E707
Object type: COIN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval silver threepence of Elizabeth I (1558-1603), initial mark Eglantine, 1573-8 AD, probably dated 1576 AD on coin (possibly 1573 or 1575 AD), North 1998
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-C51D97
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A cast lead-alloy circular uni-faced token with three visible casting spruces at the cardinal points. The token has a raised design of the initial 'E' on one side, the other side is blank. It is 21.20mm in diameter, 1.85 mm thick and weighs 4.8 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initials are thought to be Post Medieval in date, 1500-1850 AD.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-CEEDF7
Object type: COIN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval silver penny of Elizabeth I (1558-1603), initial mark probably Eglantine, issued 1574-8 AD, North 2001. About a tenth of the flan is lost to an irregular break down one side.
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-D20B62
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. On the obverse is a three quarter lengh portrait of James I with the legend: I R BRI all encircled by a pellet border. On the reverse is XIs (for 11 shillings) under a crown within a plain line circular border, over stamped with a crowned I to upper left. This is a British made weight for revalued Double Crown (half unite) of James I, 2nd coinage (Withers and Withers 1995:13). It is 14.52mm square by 3.35mm thick; it weighs 4.5 grams, 70 grains. A full weight double crown of the period 1604-1619 weighed 77.5 grains…
Created on: Wednesday 26th May 2010
Last updated: Thursday 5th August 2010
Spatial data recorded. This findspot is known as 'Chalvington with Ripe', grid reference and parish protected.

Record ID: SUSS-8F56C7
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval cast lead alloy circular uni-faced token, 1500-1850 AD. The token has a raised design on one side of the initials J and F seperated by a raised pellet with 12 above and possibly bls (or s19 upside down) below. The reverse is blank. The token measures 19.9mm in diameter, 3.1mm thick, and weighs 7.66 grams. Lead tokens were locally made and had a wide variety of uses; they are therefore hard to date precisely but those with initals are thought to be Post Medieval in date. Those with 6, 12 or 24 on are often hop tokens given to piece workers to keep track of how many sacks …
Created on: Friday 4th June 2010
Last updated: Saturday 5th June 2010
Spatial data recorded. This findspot is known as 'Heathfield', grid reference and parish protected.

Record ID: SUSS-865322
Object type: BUTTON
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast copper-alloy front of a composite hollow button. The front is hemispherical with a central pellet at the top surrounded by an incised design of a star or sun with a cenral circle with eight rays or points projecting from it and multiple parallel lines of hatching between each ray. It is 13.7mm in diameter; 6.1mm tall and weighs 2.17 grams. An identical example is illustrated in Read (2005:73, no.294) from south Somerset which he dates to the 17th to 18th century AD.
Created on: Monday 28th June 2010
Last updated: Tuesday 6th July 2010
Spatial data recorded.

Record ID: SUSS-AE77C5
Object type: COIN WEIGHT
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Post Medieval square copper alloy double sided coin weight. It is very worn but on the obverse appears to be a crown above ER enclosed within a circle. On the reverse side, which is also very worn, is an angel spearing a dragon lying at their feet. This image is enclosed within a pellet circle. This is a British made weight issued early in the reign of James I for an Angel of Elizabeth I (1558-1603). (Withers and Withers 1995: 22-3, 37 ). It is 14.2mm square by 2.9mm thick; it weighs 3.79 grams (58.5 grains). This is lighter than the weight of an Angel coin given in Withers and W…
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Ashburnham', grid reference and parish protected.

Record ID: SUSS-AFB261
Object type: TOKEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Cast lead circular unifaced token. The obverse of the token is decorated with the raised initials G over GF or GE. The reverse is blank. The token is 24.8mm in diameter, 2.33mm thick and weighs 6.84 grams. Tokens with simple designs were very easy to make, had a range of uses and continued in use for a long period. The arrangement of initials in this format was common in 17th century for married couples, the upper initial indicated the surname and the lower initials the husband and wives first names, suggesting this token dates to that time.
Created on: Monday 12th July 2010
Last updated: Monday 19th July 2010
Spatial data recorded. This findspot is known as 'Dallington', grid reference and parish protected.

Record ID: SUSS-A122D3
Object type: PATTEN
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Iron ring for attachment to a wooden patten or sole. The ring is oval with raised terminals for attachment to each side. Both terminal have rectangular strips rising at right angles to the ring and then are bent out at right angles where they expand into attachment plates. One plate is D shaped with two iron rivets through it. The other is oval with one rivet through it and a strip extending from the opposite side of the plate to the ring which ends in an irregular end, probably an old break. The ring is rectangular in section, 93mm by 101.1mm, 8.3mm wide by 6.8mm thick; with the term…
Created on: Wednesday 22nd September 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Brightling', grid reference and parish protected.

• 

  Image not taken

Record ID: SUSS-9F9103
Object type: BELL
Broad period: POST MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
Three cast copper alloy spherical rumbler bells (crotals) of Post Medieval date (1600-1800 AD). The bells are all similar although one is damaged. They are spherical and compris two hemispherical domes with raised circumferential joins. The upper hemispheres are plain with two circular sound holes and a sub-square suspension loop projecting from the top. The curve of the bell continues under the loop apertures suggesting they were made using a detachable 'sprue-piece', this method was introduced in the 17th century. The lower hemispheres have a long sound slit with circular hol…
Created on: Monday 4th October 2010
Last updated: Monday 4th October 2010
Spatial data recorded. This findspot is known as 'Etchingham', grid reference and parish protected.