Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security): 0013EBA313901599
    • Broad period: EARLY MEDIEVAL

  • Thumbnail image of YORYM-5893F1

Record ID: YORYM-5893F1
Object type: COIN
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver sceatta of Eadberht, King of Northumbria. Reverse depicts a quadruped with raised foreleg and long tail with cross beneath. AD 737-758. Thickness: 1.33mm Diameter: 13.41mm Weight: 0.88g
Created on: Wednesday 10th October 2012
Last updated: Thursday 11th October 2012
Spatial data recorded.


  • Thumbnail image of YORYM-077F77

Record ID: YORYM-077F77
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a copper-alloy cruciform brooch in the Anglo-saxon tradition dating to the early Medieval (AD 410-720). The fragment consists of the lower bow section with zoomorphic decoration in the form of bulbous eye protrusions and spatulate extensions on either side of the bow. The fragment terminates at both ends in old breaks after the lower section of the bow and before the footplate. A corpus of Anglo-Saxon material from Suffolk, pg 309, no 2. The metal is a dark green in colour. The weight was no recorded during the initial recording of the object.
Created on: Wednesday 12th September 2012
Last updated: Wednesday 10th October 2012
Spatial data recorded.


  • Thumbnail image of LIN-2FF154

Record ID: LIN-2FF154
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An early-medieval hammered penny of Cnut, struck at the Lincoln mint. On the obverse is a left facing bust holding a sceptre with a lis head. The legend reads: CNU-T REX. The reverse has a voided short cross with annulet ends and a pellet centre with the legend: LEOFWIN ON LIN. Cnut's short cross coinage was struck between c.1029 and c.1036, and this coin corresponds to North number 790.
Created on: Sunday 15th January 2012
Last updated: Wednesday 8th May 2013
Spatial data recorded.


  • Thumbnail image of NLM-94CE81

Record ID: NLM-94CE81
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy Mount. Cast openwork mount, probably with a zoomorphic design. The flat backed plate bears four integrally cast fixing pins on its back: each pin rose from a rectangular base of about 5mm square with a tapered shank of rectangular section up to 11mm long - one complete pin remains, albeit bent back. The pins are set either side of the back of the central motif, where the mount achieves its greatest height or width. The stout integral pins may suggest this object was attached to thick leather. The design presents an uncertain subject: the centrepiece might be seen as…
Created on: Thursday 27th October 2011
Last updated: Friday 1st December 2017
Spatial data recorded. This findspot is known as 'Scawby', grid reference and parish protected.


  • Thumbnail image of DUR-C63C73

Record ID: DUR-C63C73
Object type: COIN
Broad period: EARLY MEDIEVAL
County: South Tyneside
Workflow stage: Awaiting validation Find awaiting validation
Silver Edward the Confessor (1042-66) penny, minted in York, 1044-46. Radiate/small cross type, North no. 816. Minted by Aelfere at York.
Created on: Monday 18th October 2010
Last updated: Monday 9th May 2011
Spatial data recorded.


  • Thumbnail image of IOW-B14FB4

Record ID: IOW-B14FB4
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An Early-Medieval (Anglo-Saxon) cut halfpenny of Cnut the Great (1016-1035), minted at Winchester, c. 1029-1035/6 (North 1994:168, ref: 793).
Created on: Tuesday 5th October 2010
Last updated: Monday 21st March 2011
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of DUR-35F474

Record ID: DUR-35F474
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Published Find published
Cast copper alloy Viking strap junction. The strap union is circular with three circular perforations evenly spaced leaving three arms radiating from the centre to the outer edge. It is slightly domed and the arms are hollow backed. Part of the outer edge has broken away at the edge of one of the perforations. The arms are raised above the edge of the piece and have rounded, slilghtly bulbous terminals. They have incised decoration which is the same on each arm. In the centre of the three arms is a triangle. At the terminals the decoration appears to be in the form of a hu…
Created on: Tuesday 5th January 2010
Last updated: Friday 22nd July 2011
Spatial data recorded.


  • Thumbnail image of ESS-637F20

Record ID: ESS-637F20
Object type: UNIDENTIFIED OBJECT
Broad period: EARLY MEDIEVAL
County: Essex
Workflow stage: Awaiting validation Find awaiting validation
Late Early Medieval to Medieval (10th to 12th century) cast capper alloy fitting, possibly a Romanesque mace or staff-head, similar to that recorded on this database as LIN-D03FB1, or some form of horse harness fitting. The object is comprised of a circular loop with an openwork triangular terminal with an off set bar. The loop has an internal diameter of 15.45mm and an external diameter of 23.47mm, and it is 8mm wide, 3.61mm thick with a rectangular cross section. There are eight pairs of cast circular knops around the edge. The triangular terminal has a maximum width of 19.55mm a…
Created on: Friday 2nd October 2009
Last updated: Friday 9th February 2018
Spatial data recorded.


  • Thumbnail image of BUC-A5C873

Record ID: BUC-A5C873
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An Early Medieval copper alloy pin with a polyhedral head, decorated with ring and dot pattern. The two main faces have three rings of pattern whereas all the other faces only have one. Much of the shaft is missing
Created on: Friday 14th September 2007
Last updated: Tuesday 17th December 2013
Spatial data recorded. This findspot is known as 'Hatton', grid reference and parish protected.


  • Thumbnail image of ESS-861732

Record ID: ESS-861732
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation Find awaiting validation
Early Medieval (11th century) cast copper alloy strap distributor, comprised of a central triangular panel with concave edges, with each angle extending out into a devolved animal head terminal. There is a circular ring attached under the animal heads, forming three openwork sub-oval areas which would have been used to secure a hook or strap fitting. A more elaborate fitting of this type has been recorded on this database as LIN-F29FC4.
Created on: Monday 14th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NARC-5DA8F4

Record ID: NARC-5DA8F4
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Published Find published
An early medieval Series D type 2c('continental runic') silver sceatta. This type developed out of early series C designs, from the late primary or intermediate phases,perhaps the latter, given that the silver appears rather debased. It was probably struck in the lower Rhine region. On this example, as on many Series D coins, the 'APA' inscription (to the right of the obverse bust, and probably referring to the coin's moneyer) is innaccurately rendered. Obv: Right-facing bust, with poorly rendered runic inscription 'APA'. Rev: Cross with pellet in each angle.
Created on: Monday 30th April 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of NCL-20BC27

Record ID: NCL-20BC27
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy cast strap end from the late Anglo-Saxon period. It is almost triangular in plan and is not complete being broken at the top (widest) end. It is zoomorphic in design, probably a mouse, and dates to around the 9th century AD. The design is zoomorphic and a snout, eyes and ears can be seen. The snout is narrow at the bottom and widens up to the ears where it stops. The eyes are raised hollow circles, the ears are similar but sub-circular and larger. The ears may have been filled with something, possibly enamel for decoration.
Created on: Monday 8th January 2007
Last updated: Wednesday 25th March 2015
Spatial data recorded.


  • Thumbnail image of LIN-D17C35

Record ID: LIN-D17C35
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published Find published
Early medieval lead strap-end. The strap end is rendered in the Winchester style. Although this decoration is fairly crude in execution and eccentric in detail, it depicts a fairly standard inhabited plant-scroll design featuring a pair of confronted lizard-like creatures with rounded heads (and possibly tails) at the top, each perched on the branches of a central plant which sprouts from an unusual calyx or bulb at the bottom. Whilst fairly low-level in craftsmanship, the fact the decoration has been finished and the rivet holes pierced shows that such lead examples were clearly inte…
Created on: Monday 28th April 2003
Last updated: Monday 27th January 2014
Spatial data recorded.


1 - 13 of 13 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.