Record ID: LEIC-E1052A
Object type: RIVET
Broad period: EARLY MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An Early Medieval copper-allot stud/rivet, dating to c.AD 500 - 600. The stud is circular in plan and rectangular in section. The front of the stud has a chip carved design in the centre. In the centre of the stud is an annulet, radiating around the stud are four sets of three curved lines which create a lozenge style pattern. The outer boarder of the stud is undecoarated. The rear of the stud is also undecorated, projecting from the centre is a cylindrical shaft which terminated in a flattened circular head. The central design has retained traced of gilding. Diameter: 18 mm Th…
Created on: Wednesday 25th May 2022
Last updated: Wednesday 25th May 2022
Spatial data recorded. This findspot is known as 'Ratcliffe on Soar', grid reference and parish protected.

Record ID: SOM-7817FB
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Somerset
Workflow stage: Awaiting validation
A complete copper alloy early medieval (Anglo Saxon) plate-headed pin, c. late 9th century AD. The pin comprises a flat, sub-circular head decorated on the front with ring-and-dot motif at the four cardinal points and one in the centre. There are four circular perforations, one in each corner. It is undecorated on the back. There is no collar around the shank, which tapers gradually to a point and show very slight evidence of being hipped. The end of the shank is bent slightly to the left. Length: 54.25mm, width of head: 17.87mm, thickness of shank (middle): 1.82mm, weight:…
Created on: Monday 13th December 2021
Last updated: Friday 7th January 2022
Spatial data recorded.

Record ID: NARC-E1D14A
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Buckle of Early-Medieval date (AD 900-1050). The object is a zoomorphic single-loop buckle frame. The pin is missing, bar and one arm of the frame ore missing due to old abraded breaks. The frame is D-shaped with Borre-style animal heads at the ends of the bar and the midpoint of the outer edge. The frame is D-shaped in cross-section and is decorated with incised, repeating rectangles. The two retained animal head knops all have tapering, snub-nosed muzzles with large, rounded ears at the back, the ears have a central recess. The eyes of each are circ…
Created on: Monday 6th December 2021
Last updated: Friday 10th December 2021
Spatial data recorded.

Record ID: WILT-41265C
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Early Medieval copper alloy and enamel buckle, dating to c AD 650 - 750. It consists of the loop of what was probably a three-part buckle. Tongue and plate (which would have been integral to one another) and what was probably a sub-triangular body, are missing. The loop is sub-pelta shape with the outer edge possibly taking the form of two opposed stylised zoomorphic heads, raised up, their snake-like tails continuing around the loop and almost meeting at the attachment end. Below the raised heads is a half-round pin notch. The beasts are indicated by sub-rectangular and…
Created on: Monday 11th October 2021
Last updated: Wednesday 18th May 2022
Spatial data recorded. This findspot is known as 'Near Marlborough', grid reference and parish protected.

Record ID: BH-12CD02
Object type: PENDANT
Broad period: EARLY MEDIEVAL
County: Hertfordshire
Workflow stage: Awaiting validation
An incomplete cast copper-alloy late Early Medieval (Anglo-Saxon) harness pendant. The pendant is sub-axe-shaped with a rounded lower edge, one surviving flared edge and a narrowed upper section with inwardly tapering edges that extends to a rounded upper edge. There are several areas of damage. This includes the upper section of the plate which is bent over backwards, and a missing flared edge opposite the surviving one that has left a large unevenly broken scar. The remaining edges are all very uneven with wear and damage, some with notches out of them. An integrally cast recta…
Created on: Wednesday 28th July 2021
Last updated: Tuesday 5th April 2022
Spatial data recorded.

Record ID: WILT-3F0CAE
Object type: BROOCH
Broad period: IRON AGE
County: Wiltshire
Workflow stage: Awaiting validation
An incomplete Middle Iron Age copper alloy brooch, dating to c. 250-100 BC. Adams, 2013, Type 2Ba3. The pin is missing. The brooch has three sub-oval cone-shaped hollow bosses in a line, creating a scalloped edge on each side. Each boss has a setting in the apex for coral or enamel, now missing. At each end of the brooch is a transverse collar and an elongated knop similar to an acorn shape which extends from the base of the cone. The cones thus are raised up from the ends. Below one knop is a sub-triangular pierced double lug which would have held a hinged pin, and below the other, …
Created on: Sunday 30th May 2021
Last updated: Thursday 10th March 2022
Spatial data recorded.

Record ID: NLM-239E88
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch. Cast cruciform brooch, comprising head, mid bow, lower bow and foot and retaining a single U-shaped lug behind the middle of the head and a folded catch plate between lappets at the top of the lower bow. Bent across the head by plough or spade strike. A rectangular plate has slightly indented or concave upper and lower edges, a central trapezoid panel, also plain, and is surmounted by an integrally cast half-round collared top knob which is lightly hollowed behind. An incised horizontal groove passes across the base of the central panel on the head, with oppo…
Created on: Monday 16th November 2020
Last updated: Monday 27th June 2022
Spatial data recorded. This findspot is known as 'Thoresway', grid reference and parish protected.

Record ID: NLM-039468
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy mount fragment. Small thin fragment, possibly from a mount of cross-shaped form with concave sides to its arms, retaining interlace strap-work with relict gilding on one side, with plain borders, one lightly convex and the other concave. Lightly bent, broken along one edge. Kevin Leahy kindly comments as follows: 'I think that this piece represents a fragment decorated in what the Staffordshire Hoard report called the 'Early Insular Style' which was dated to c. 630-660. The matting-link interlace formed from three strands is characteristic of what was, in the Staffs. Hoar…
Created on: Wednesday 21st October 2020
Last updated: Friday 22nd October 2021
Spatial data recorded. This findspot is known as 'Roxby cum Risby', grid reference and parish protected.

Record ID: BH-42A151
Object type: BROOCH
Broad period: MEDIEVAL
County: Essex
Workflow stage: Awaiting validation
An incomplete cast copper-alloy object of uncertain function, possibly a brooch dating to the Medieval period (c. AD 1000-1200). The object is disc-shaped with a raised hemispherical central boss. The upper surface is decorated with a moulded circular and geometric pattern. The four concentric ring and dot motifs, one roughly in each quarter of the plate, consist of a single grooved circle, another circle within it and a circular dot at the centre. The zones between the two circular grooves are flat and plan. Around the base of the central boss is a border consisting of small and slig…
Created on: Monday 12th October 2020
Last updated: Thursday 10th December 2020
Spatial data recorded.

Record ID: WILT-9102B8
Object type: CASTING WASTE
Broad period: UNKNOWN
County: Wiltshire
Workflow stage: Awaiting validation
A fragment of copper-alloy casting waste of uncertain date. The casting waste is amorphous in form, but narrows to a wide rounded terminal at one end. A horizontal ridge is at its widest point, as well as a series of striations arranged both horizontally and longitudinally. Further, longer longitudinal striations are present at the narrowed end. The reverse exhibits a long rough moulding along its length, which birfurcates at the wider end. There is a green patina on the surface, as well as blackened areas. The casting waste measures 48.95mm in length, 30.91mm in width, 8.59mm in…
Created on: Friday 28th August 2020
Last updated: Wednesday 2nd September 2020
Spatial data recorded.

Record ID: WAW-AEBEF7
Object type: DRESS FASTENER (UNKNOWN)
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation
Date: Circa AD 1500-1600 Description: An incomplete copper alloy and dress accessory of uncertain type. The object is circular in plan and sub-rectangular in cross-section. The face of the object is decorated with two inward facing scrolls in relief in each quarter, with a raised oval below where each scroll meets. There is a raised border around the perimeter. There very edge of the object is chipped around the circumference. There are five silver studs set at the centre and opposing quarters to the scrolls. The face of the object retains much gilding. The reverse of the object …
Created on: Thursday 30th April 2020
Last updated: Wednesday 8th September 2021
Spatial data recorded. This findspot is known as 'Inkberrow', grid reference and parish protected.

Record ID: WMID-6E662D
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Warwickshire
Workflow stage: Published
A near complete copper-alloy and enamelled Early-Medieval buckle, dating from circa AD 700-800. The object is broadly an inverted triangle in plan with an expanded zoomorphic projection at the tip. The zoomorphic projection has oval shaped moulded eyes and a triangular snout or nose. The main body of the buckle then expands to the opposing upper edge which features two broadly rectangular projections at the outer corners. A third projection is located at the centre and is triangular in form and extends down on to the body of the buckle. The front face of the object is enam…
Created on: Wednesday 15th April 2020
Last updated: Thursday 15th July 2021
Spatial data recorded.

Record ID: CAM-49F9C9
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete copper-alloy artefact of Early-Medieval date but uncertain function. This is most probably an incomplete mount, possibly related to stirrups or some other harness fitting. It weighs 8.24g and has a maximum width of 24.6mm. The length is currently 38.8mm, however a break is present at both ends (very worn at the wider end of the artefact and moderately worn at the tapering end). In its incomplete state the object has a pear or tear-drop shape. The reverse surface is undecorated and flat, however a concave depression is present on the reverse behind an area of moulding on …
Created on: Friday 20th March 2020
Last updated: Saturday 25th September 2021
Spatial data recorded.

Record ID: NLM-785C03
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy unidentified object. A small narrow cast rectangular-section bar of width 3.7mm, with a possibly zoomorphic rounded terminal resembling the eyes of a fly at one end; it is plain at the other end. Two drilled holes of diameter 1.3mm are set near the rounded terminal, between low flanges and a ridge linking them which bears four neatly incised transverse cuts. Here, two pairs of opposed half-round knops project from either side of the bar, slightly offset both from each other and from the holes, perhaps to represent legs. The terminal itself is divided by a tiny central rid…
Created on: Tuesday 10th March 2020
Last updated: Thursday 12th March 2020
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.

Record ID: HAMP-D0EBC5
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Hampshire
Workflow stage: Awaiting validation
A late early-medieval (11th century) copper alloy mount in the form of a zoomorphic oval loop, decorated with four moulded animal heads arranged alternately facing upwards and downwards. The heads are arranged equidistantly, but appear at the middle of the long edges and occupying all of the short edges. The band between is vertical and an elongated D in cross-section (being flat to the inside surface), 6.4mm tall and c.2mm thick. Projecting above the heads on the two longer edges is a semi-circular extension c.7mmx2mm, pierced at the centre (1.5mm in diameter); the piercings are perf…
Created on: Wednesday 19th February 2020
Last updated: Tuesday 25th February 2020
Spatial data recorded.

Record ID: NLM-42CC0B
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy strap end. A small cast asymmetrical tapered strap end with an expanded wedge-shaped split end occupied by a large bordered eye-shaped element of interlace; a pair of stumpy protrusions [legs or fins?] on one side only; continuing arcs of deeply defined interlace along its narrow body; and a longitudinally grooved and narrow pointed tongue with chevrons along its length protruding from narrow jaws, one possibly undershot and the other perhaps bearing a small rounded protruding eye. The interlace which begins strongly at the wedge-shaped end may continue in a pattern perha…
Created on: Friday 31st January 2020
Last updated: Monday 3rd February 2020
Spatial data recorded. This findspot is known as 'Epworth', grid reference and parish protected.

Record ID: NLM-01550A
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy stirrup mount, as kindly identified by Kevin Leahy, who comments '...see David Williams' 'Stirrup Terminals', Finds Research Group, Datasheet 24, particularly Fig. 3.The Urnes type eye is a give away. It's still a nice find, and David saw them as being an East Anglian/Lincolnshire type'. A small oval-ended cast hollow object, in the zoomorphic form of a quadruped beast with a gaping open jaw, and with short forelimbs resting on a broad flat tail with two grooves at its end. The flat tail may indicate the subject to be a beaver: a creature known to Anglo-Saxon England, if …
Created on: Tuesday 28th January 2020
Last updated: Tuesday 28th January 2020
Spatial data recorded. This findspot is known as 'Temple Bruer', grid reference and parish protected.

Record ID: CORN-8EB1FB
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Cast copper alloy pin from a D-shaped buckle, possibly dating from the Anglo-Saxon period, c.AD 575-625. The pin has broken off from the base plate above the loop that would have wound around the pin bar. The broken end is circular in section and 8 mm in diameter and the pointed end has been chiselled from both sides into a rectangular edge that is 5 mm in length and 3 mm in width. The base plates were often shield shaped as seen in D-shaped buckles illustrated in MacGregor & Bolick (1993) om pp.203-204, nos.34.45-34.52. See LVPL-A115C7 for a similar buckle on the database, which i…
Created on: Thursday 5th December 2019
Last updated: Monday 9th December 2019
Spatial data recorded.

Record ID: NARC-3C9F06
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Mount of Post-Medieval date (AD 1650-1750). The object is composed of a large open work plate in the form of highly stylised floral motif, similar in form to a pot of lilies which (as the finder comments) is a symbol of Annunciation within Medieval Christian symbolism. The plate is composed of an upper trifoliate of lilies with incised lines on each to indicate petals. The stems join at the centre of the plate and converge into an inverted sub-triangular pot/vessel which expands out in the lower portion of the object to the rectangular body of the pot/vessel…
Created on: Tuesday 19th November 2019
Last updated: Wednesday 20th November 2019
Spatial data recorded.

Record ID: NARC-3BF695
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Mount of Post-Medieval date (AD 1675-1725). The object is cast and is circular in plan and domed with a concave back and a central circular opening for a now missing pin. The upper surface of the object has a raised integral decorative pattern composed of six repeating human face with ovate eyes, long nose, thin mouth and linear grooves representing hair. Between each face is a large annulet in pellet, three raised squares and a second annulet in pellet. The back of the object is concave and undecorated with voids indicating the positioning of the decorative…
Created on: Tuesday 19th November 2019
Last updated: Wednesday 20th November 2019
Spatial data recorded.