Record ID: LVPL-0A0F5A
Object type: WEIGHT
Broad period: EARLY MEDIEVAL
County: Sefton
Workflow stage: Awaiting validation
A complete polyhedral lead weight, probably dating to the early medieval period (c.AD 850-950). The weight has eight unequal sides with each face presenting incised lines of inconsistent directions. One face appears to have a square in the centre. The edges are rounded which may be due to abrasion from the sea (found on coastland).The object has a smooth dark grey patina. Dimensions: Length 11.6mm; width 11.23mm; weight 9.7g Similar polyhedral weights have been discovered at the Viking camp/settlement at Torksey, see DENO-C08136; DENO-C075A3; DENO-C065B4 andDENO-9458A3 …
Created on: Thursday 3rd March 2022
Last updated: Friday 13th May 2022
Spatial data recorded.

Record ID: LVPL-876680
Object type: STRAP END
Broad period: MEDIEVAL
Workflow stage: Awaiting validation
A Medieval (1200-1400) strap end of copper alloy composition (as evidenced by substantial greening), with remaining elements of silvering. The object is narrow and thin, tapering from 10mm at the widest surviving part to 7mm at the narrowest. There are two visible plates connected by a pin, though it is clear from the break point at the narrowest end that there were originally two pins and it is at this weak point it has snapped. some compressed dried soil obscures a view of the inside. The upper plate is decorated with a clear border, the area inside of which has remnants of a c…
Created on: Tuesday 30th October 2018
Last updated: Monday 28th June 2021
No spatial data available.

Record ID: LVPL-86A992
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
A cast copper alloy possible strap fitting dating to the Early Medieval period. The body of the object is sub-triangular in shape and hollow. Each face is decorated with a long triangular perforation measuring 14mm in length and 7mm in width at the base. On the front and rear faces of the object are three more perforations. Either side of the top of the large triangle is a small lentoid perforation while above the top point of the triangular perforation is a small inverted triangular perforation measuring 6mm in length. The base of the object is rectangular in plan with a central circ…
Created on: Wednesday 11th June 2014
Last updated: Wednesday 9th December 2020
Spatial data recorded. This findspot is known as 'Kelsall', grid reference and parish protected.

Record ID: LVPL-D9F581
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Shropshire
Workflow stage: Awaiting validation
Cast copper alloy strap junction of medieval date. It is circular in plan and oval in section. The upper surface is decorated with a complex design representing a cross. Enamel is used to create the darker lines of decoration. The central decoration is in the shape of a square. Four decorative lines radiate out from the corners of the square to the outer border. Four short lines radiate out from each side of the square. These then split to the left and right of the main line and continue to the outer border of the object. The radiating lines and the border are a mid brown bordered by …
Created on: Tuesday 21st April 2009
Last updated: Tuesday 8th January 2019
Spatial data recorded. This findspot is known as 'Oswestry', grid reference and parish protected.

Record ID: LVPL-A37788
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Published
A copper-alloy strap-slide dating to the 10th century. It is flat and rectangular, and decorated with a crude relief Borre-style ring chain. On the ridges of the ring chain the remains of gilding (or the bare copper alloy) can be seen. On one side of the outer face is a triangular perforation, apparently a casting flaw. On the reverse is a rectangular attachment loop, D-shaped in cross-section. The loop is integral and has possibly been repaired at one side where there is an overlap of copper alloy. The loop has been pushed inwards in the centre during antiquity. There is a smal…
Created on: Tuesday 14th August 2012
Last updated: Wednesday 14th March 2018
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.

Record ID: LVPL-C8B1A3
Object type: PLUMB BOB
Broad period: MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Published
An incomplete lead alloy plumbob dating to the Medieval period. The weight is oval in plan and cross-section with a central decorated panel on each face. The decorated panel on each face sits within an oval depression with the decoration on one face consisting of a zig-zag ridge running the length of the panel with three pellets between each turn of the ridge. The opposite face of the object is decorated with an scroll pattern. The top of the object is incomplete and is dished with a projection at each edge. These projections would have expanded to form an attachment loop when comp…
Created on: Thursday 9th February 2017
Last updated: Friday 12th May 2017
Spatial data recorded. This findspot is known as 'Guilden Sutton', grid reference and parish protected.

Record ID: LVPL-EE4C75
Object type: CORE
Broad period: MESOLITHIC
County: Nottinghamshire
Workflow stage: Awaiting validation
A large flint core of early Mesolithic or early Neolithic date. The core is cylindrical with one platform and parallel striking of narrow blades. One face of the object has narrower scars from blade removal while on the opposite face wider blades have been removed down the length of the core with shorter narrower blades removed from above (towards the striking platform) at a diagonal angle to the lower removals. The removed flints appear to have been blades. There is no visible sign of platform dressing. A strip of light cream cortex remains along the length of one side of the core…
Created on: Tuesday 7th March 2017
Last updated: Wednesday 8th March 2017
Spatial data recorded. This findspot is known as 'Barnby Moor', grid reference and parish protected.

Record ID: LVPL-E1BCC7
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A copper alloy and iron Viking strap fitting of Early Medieval date. The object is sub-triangular in plan, expanding at either end and waisted in the centre. The wider expanded end is square in cross-section and has an iron core from which projects the remains of a possible circular rivet for attachment. From the solid square end the object narrows and thins towards the opposite end which is split. The split measures 10mm in length, and is held together by a copper alloy circular rivet at the terminal with a diameter of 3mm. Each face of the object is decorated with six transverse …
Created on: Tuesday 17th January 2017
Last updated: Thursday 19th January 2017
Spatial data recorded. This findspot is known as 'Beal', grid reference and parish protected.

Record ID: LVPL-C4474B
Object type: PLUMB BOB
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
An incomplete lead alloy plumbob dating to the medieval period. The weight is oval in plan and cross-section with a central decorated panel on each face. The decorated panel on each face sits within an oval depression with the decoration consisting of a series of pellets and diagonal ridged lines. One end of the object is incomplete and is dished with a projection at each edge. These projections would have expanded to form an attachment loop when complete. Similar line and pellet decoration is commonly found on medieval spindle whorls. A similar example which has been recorded o…
Created on: Tuesday 23rd August 2016
Last updated: Wednesday 5th October 2016
Spatial data recorded. This findspot is known as 'Betchton', grid reference and parish protected.

Record ID: LVPL-30A793
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Flintshire
Workflow stage: Awaiting validation
An almost complete copper alloy brooch of Early Medieval date, late 8th-9th century. The brooch is circular in plan and flat with zoomorphic and openwork decoration. The brooch is decorated with a central 'kite-shaped' cross, the terminals of which are rounded, expanding out over the edge of the circumference of the plate. Each rounded terminal contains a circular groove within which is an undecorated area containing a circular rivet hole. Three of the outer incomplete rivets remain in the holes along with a central rivet while one is missing. It is likely that these rivets when co…
Created on: Thursday 4th August 2016
Last updated: Tuesday 20th September 2016
Spatial data recorded. This findspot is known as 'Nannerch', grid reference and parish protected.

Record ID: LVPL-4EFB71
Object type: FURNITURE FITTING
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy zoomorphic terminal, probably a box fitting, 11/12th century in date. The object is broken. It seems to represent the head of a an animal with the face, eyes and nose visible. The eyes are two concave circles. The nose is represented by a rise at the end of the face. At the end of the nose is a circular termial, with a circular perforation, possibly for attachment. The object has a semi-circular cross section which is bigger at the head of the animal.
Created on: Wednesday 9th January 2008
Last updated: Friday 9th September 2016
Spatial data recorded.

Record ID: LVPL-BB2D23
Object type: ARROWHEAD
Broad period: BRONZE AGE
County: Bournemouth
Workflow stage: Awaiting validation
The object is sub-triangular in plan with a lozenge shaped cross-section. The flint has a rounded point and two seperate barbs. There is no central tang and it does not appear that one has broken away. The object has short parallel long angled retouch along each edge and is flaked on each surface. One long edge measures 5mm thick, while the opposite long edge is just 2mm thick. The arrowhead is on a light grey flint with no remaining cortex. Dimensions: 53mm in lenght, 25mm in width (at base), 3.5mm in width (at tip), 5.5mm thick, 5.4g.
Created on: Tuesday 5th July 2016
Last updated: Tuesday 6th September 2016
Spatial data recorded. This findspot is known as 'Bournemouth', grid reference and parish protected.

Record ID: LVPL-B07C55
Object type: FINGER RING
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Published
Copper alloy twisted ring, possibly Viking in date. This ring consists of two pieces of copper alloy wire which have been twisted together. It is now not a full circle having been bent out of shape. Both ends are narrowed almost to a point. There is the remains of gilding on the surface.
Created on: Friday 1st May 2009
Last updated: Tuesday 2nd August 2016
Spatial data recorded.

Record ID: LVPL-F7E419
Object type: DAGGER
Broad period: BRONZE AGE
County: Bolton
Workflow stage: Awaiting validation
A flaked flint dagger of early Bronze Age date, 2,500-1,500BC. The object is a pointed oval in plan and lozenge shaped in cross-section. The flint is flaked on each face with covering retouch. Along each long edge and around the point is short, parallel low-angle retouch. The implement has been made on a grey-brown to dark grey flint. Dimensions: 141mm in lenght, 47mm in width (at centre), 6mm thick (at centre), 10mm in width (at the point), 14mm in width (at the butt end). A similar dagger which has been recorded on the PAS database is SF-AFF8C5, https://finds.org.uk/database/a…
Created on: Friday 8th July 2016
Last updated: Thursday 14th July 2016
Spatial data recorded. This findspot is known as 'Horwich', grid reference and parish protected.

Record ID: LVPL-27EF60
Object type: RETOUCHED FLAKE
Broad period: BRONZE AGE
County: Lancashire
Workflow stage: Awaiting validation
A flint coarse retouched flake probably dating to the later Bronze Age. The object is triangular in cross-section with the remains of cortex on one side of the dorsal face. At the proximal end is a large triangular striking platform while a small (possibly accidental) triangular platform is at the distal end. Along the long edge the retouch is short, sub-parallel and at a low angle. A small amount of retouch is also on the opposite edge where the cortex has been removed. It is also short, sub-parallel and low angled. The flint has a dark grey cortex and a toffee brown to light cream m…
Created on: Tuesday 28th June 2016
Last updated: Thursday 30th June 2016
Spatial data recorded. This findspot is known as 'Burscough', grid reference and parish protected.

Record ID: LVPL-8B9CEA
Object type: AXEHEAD
Broad period: NEOLITHIC
County: County of Herefordshire
Workflow stage: Awaiting validation
An almost complete unpolished flaked axe of Neolithic date and of Scandinavian type. The object has a convex cutting edge and straight parallel sides which taper to a squared off butt end. The cutting edge measures 64mm in width and is 3mm thick. A large oval flake has been removed from one face just above the cutting edge in recent times and is likely due to plough damage. Each face of the object has been worked with flaking. The flaked sides taper evenly towards the butt end which is rectangular in cross-section. The butt end measures 25.5mm in width and is 22mm thick. The butt e…
Created on: Tuesday 3rd November 2015
Last updated: Tuesday 3rd November 2015
Spatial data recorded. This findspot is known as 'Dinedor', grid reference and parish protected.

Record ID: LVPL-BFBC1E
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Published
A cast copper alloy Early-Medieval (Anglo-Saxon) copper alloy buckle frame, probably dating from the 6th century. The frame is rectangular, with a single loop, thick edges and a recessed narrowed bar. The pin is missing. The underside of the buckle is flat and plain but the upper face is decorated with a curved recess either side of the notch for the pin. The recess contains seven raised triangles on each side. The recess would probably have been inlaid with decoration, perhaps in a zig-zag around the raised triangles. Damage at one side of the frame suggests that the inlay may have b…
Created on: Tuesday 8th July 2014
Last updated: Monday 13th April 2015
Spatial data recorded. This findspot is known as 'Huxley', grid reference and parish protected.

Record ID: LVPL-D1295B
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
An incomplete cast copper alloy Late Saxon tongue-shaped copper alloy strap-end of Thomas' (2004) Class E. The attachment end is incomplete. Just below the attachment the object is decorated with a double horizontal ridge separated with a groove. The top ridge is decorated with punched dot decoration. The object is decorated in relief and with openwork. The strap end has a central square with four punched dots. Four separate raised sub-ovals sit at each side of the central square. Projecting from each corner of the square is a narrow arm, each decorated with three punched dots and …
Created on: Wednesday 9th July 2014
Last updated: Monday 13th April 2015
Spatial data recorded. This findspot is known as 'Huxley', grid reference and parish protected.

Record ID: LVPL2260
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Published
Early Medieval pin, balloon-shaped head separated from the shank by a small, circumfercial moulding. Complete but shank is bent.
Created on: Wednesday 25th September 2002
Last updated: Friday 27th March 2015
Spatial data recorded.

Record ID: LVPL-4B6303
Object type: UNIDENTIFIED OBJECT
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
A cast copper alloy unidentified object of Early Medieval to Medieval date. The object is conical and faceted with an oval base. The object tapers towards the top which is rounded and complete. Four rounded knops decorate each side of the object just below the rounded top. The object is decorated with a series of punched dots forming a border around the bottom edge of the object. Seven punched dots run from this border up two faces of the object to the central knop. The base is undecorated. The object has a dark green patina and is in good condition. The object seems too large to b…
Created on: Wednesday 18th February 2015
Last updated: Wednesday 18th February 2015
Spatial data recorded. This findspot is known as 'Selby area', grid reference and parish protected.

Record ID: LVPL-17B859
Object type: KNIFE
Broad period: ROMAN
County: Denbighshire
Workflow stage: Awaiting validation
An iron whittle tanged knife of Roman to Medieval date. The blade measures 93.02mm in length and the tang 13.17mm in length. The tang is incomplete. Each edge is slightly curved with the cutting edge measuring 1.28mm thick and the opposite edge measuring 2.07mm. The knife terminates with a rounded point. The surfaces of the object are uneven due to corrosion. It is mid-brown in colour. The form is of Manning's Roman Type 16, which he says is a long-live type. The form would also be quite acceptable in the Early Medieval period (Drinkall type A) and there are good parallels in Cowgi…
Created on: Thursday 11th September 2014
Last updated: Thursday 11th September 2014
Spatial data recorded. This findspot is known as 'Tremeirchion', grid reference and parish protected.

Record ID: LVPL-49AF8D
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast lead alloy Early Post Medieval dress hook of Read's Class D, Type 6, c. 1500 - 1550. The object comprises of a triangular base with three raised circles of equal size arranged around a smaller knop in the centre. The triangular plate has a frilled edging. The back of the object is flat with the remains of three attachment points. The object has a light grey patina.
Created on: Tuesday 27th May 2014
Last updated: Tuesday 29th July 2014
Spatial data recorded. This findspot is known as 'Collingham', grid reference and parish protected.

Record ID: LVPL-60DEB3
Object type: PIN
Broad period: EARLY MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Published
Cast copper alloy Early Medieval kite headed pin. It has a lozenge shaped head with a circular perforation at the top. The shaft of the pin has a circular section and has broken before the end. Dr Kevin Leahy says 'These are of 10 - 11th century date and seem to be of ultimately Irish origin, although they are found in England due to the Vikings. This pin is slightly unusual as it has a hole though the head.'
Created on: Thursday 10th January 2008
Last updated: Sunday 27th October 2013
Spatial data recorded.

Record ID: LVPL-ACFE56
Object type: UNIDENTIFIED OBJECT
Broad period: MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy object dating from the 12th-13th century. The object is sub-oval in plan with a sub-rectangular tab projecting from one side. The tabbed projection is pierced with a regular circular perforation. One side of the object is engraved with a face. The oval face has an open down-turned mouth, a long narrow nose and oval eyes. Below and to the right of the perforation is a small trefoil. The remains of gilding can be seen on the face and trefoil. On the rear of the object are two engraved curved lines which appear to be deliberate decoration. The use …
Created on: Monday 7th January 2013
Last updated: Tuesday 8th January 2013
Spatial data recorded. This findspot is known as 'Egmanton', grid reference and parish protected.

Record ID: LVPL-454A04
Object type: BRACELET
Broad period: ROMAN
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy bracelet dating to the Roman period, c. 4th century AD. The object has been cut down and reused to form a finger ring. The artefact is trapezoidal in plan, in that it narrows very slightly from one end to the other. It has a rectangular cross-section. The bracelet is decorated unifacially using ring-and-dot motifs. Towards the terminal end of the object are twelve ring-and-dots in parallel lines, beyond these the object tapers and five ring-and dots are placed in a single line. Below the final ring-and-dot is a transverse groove before the object termin…
Created on: Thursday 27th September 2012
Last updated: Friday 28th September 2012
Spatial data recorded. This findspot is known as 'Elkesley', grid reference and parish protected.

Record ID: LVPL-D78BE5
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy Anglo-Saxon cruciform brooch from the late 5th century AD. The foot is D-shaped in cross-section before flattening out. The foot has a zoomorphic terminal with two eyes picked out by raised dots. The object has expanded circular nostrils above the spatulate extension. Above the zoomorphic terminal the foot is decorated with three transverse mouldings. A small amount of the base of the catchplate remains on the reverse. The object has a dark green patina and is in good condition. Similar examples can be found on p105-107, MacGregor and Bolick, (1993). Th…
Created on: Monday 23rd January 2012
Last updated: Wednesday 8th February 2012
Spatial data recorded. This findspot is known as 'Scopwick', grid reference and parish protected.

Record ID: LVPL-9E25E4
Object type: WEIGHT
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Published
Cast copper alloy weight dating to the Early Medieval period. The object is sub-circular in plan and rectangular in cross-section. The upper surface is decorated with five running spirals within a grooved border. The reverse of the object is decorated with three ring-and-dot decorations which are unevenly spaced. Some signs of corrosion can be seen on the lower surface. The object has a dark green patina. Weights such as this are usually attached to a block of lead. Although the object measures 5.98mm in thickness it appears to have originally been a mount from a shrine. It can be d…
Created on: Tuesday 29th June 2010
Last updated: Wednesday 15th June 2011
Spatial data recorded. This findspot is known as 'Malton', grid reference and parish protected.

Record ID: LVPL-61A287
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Copper alloy decorative mount with gilt decoration on the front face. Early Medieval in date, c.7-800AD. It is incomplete, bent and has broken into 2 pieces. The larger piece (which has one bent end) measures 24 x 21mm. The smaller piece measures 19 x 20mm. The decoration consists of 2 lines of scroll swirls inside a border. At one end of the clasp there are 2 small circular holes, one at each corner. In what would have been the centre of the clasp is a circular perforation, surrounded by a circle of plain metal. This piece is typical of the 8th century both in design and the gild…
Created on: Wednesday 16th April 2008
Last updated: Friday 27th May 2011
Spatial data recorded.

Record ID: LVPL-5BFF54
Object type: MOUNT
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Cast lead incomplete object of uncertain function and of possible medieval date. It is sub-circular in plan and oval in section. The outer edge is raised and rounded on the upper surface while the reverse is flat. The upper surface is decorated with a flower-like design consisting of two raised petals and a raised central circle. Two more petals probably decorated the opposite half which is missing. A raised border encloses the flower. There is a small circular indentation on the reverse of the object. This is an interesting object however it's function is unknown.
Created on: Wednesday 15th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Macclesfield', grid reference and parish protected.

Record ID: LVPL-4942C7
Object type: STRAP FITTING
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy Post Medieval belt fitting or hook. It is drop shaped in plan with a narrow strip protruding from the rounded end which curves round to form a hook. It has broken before the end. At the narrowed end the fitting is bulbous. In the centre of the fitting is the remains of a circular rivet.
Created on: Sunday 26th April 2009
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-01B0D2
Object type: HARNESS FITTING
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Cast copper alloy Early Medieval harness fitting. It is in three pieces but when complete is a cross-shape. Two of the arms have broken off, the ends remain but some of the middle section is missing. The estimated measurement when complete is 42mm. The main piece measures 29.29mm by 29.03mm in its present state. In the centre of the cross is a raised hollow dome which is 5.99mm high. Each arm ends in a trilobe shape, the central lobe having a rivet in the middle.
Created on: Sunday 17th May 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Aston Area', grid reference and parish protected.

Record ID: LVPL-1D3EA7
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Cheshire West and Chester
Workflow stage: Awaiting validation
A fragment from a cast copper alloy undecorated socketed axehead of Late Bronze Age date. The piece represents the lower part of the axehead. It is rectangular in section with a hollow rectangular socket. Viewed in plan, the sides flare outwards slightly to the cutting edge which is modestly curved. The axe terminates in old breaks mid-way above the blade end. The cutting edge is 2.92mm thick and is quite damaged. It is 57.24mm in length, 35.78mm wide and weighs 57.8g. At the socketed end the axe is 4.71mm thick. It has a dark grey/black patina.
Created on: Monday 6th July 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Beeston', grid reference and parish protected.

Record ID: LVPL-C950D0
Object type: STRAP FITTING
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Published
Cast bronze strap-distributor dating to the Early-Medieval period. It consists of a ring 25.03mm in diameter, with a three-spoked construction and a central circular setting containing a domed green glass setting 6.48mm in diameter. Each of the spokes terminates in a moulded animal head with pronounced hollowed-out ears and a moulded snout. Attached to the ring are two zoomorphic clasps. Each clasp consists of a bar of metal bent in two around the ring, the lower half of which is flat while the upper half is moulded in the form of an animal head. The clasps have an oval mo…
Created on: Monday 19th October 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Kingsley', grid reference and parish protected.

Record ID: LVPL-EFD5D7
Object type: BELL
Broad period: MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Cast copper alloy bell probably dating to the Medieval period, (1100-1500). It is round in plan and sub-oval in cross section. The bell has a simple form. The top of the object is rounded and it widens towards its open base. A broken circular loop is integrally cast at the top of the object. A moulded ridge runs around the outer base of the bell. There is no other visible decoration. The object is quite damaged, a fragment of the base rim is missing and a large crack runs along a portion of the moulded ridge. The patina has also been damaged and the attachment loop broken. The remains …
Created on: Monday 2nd November 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Goostrey', grid reference and parish protected.

Record ID: LVPL-80B024
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
A single looped cast copper alloy buckle, dating from the late early-medieval to medieval period (10th to 12th century). The strap bar is very narrow, whilst the D-shaped frame is wide with a circular section. There is a notch for the pin, but the pin is missing. The frame is very thick, 8.85mm. An integral moulded decoration projects from either side of the buckle frame. The detail is unclear however it is possibly stylised representation of an animal head. Below the buckle bar there are two more projections which are tail-end Urnes style. It has a dark green patina and is in good con…
Created on: Monday 9th November 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Vale Royal', grid reference and parish protected.

Record ID: LVPL-8CBBE5
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Cheshire East
Workflow stage: Published
Cast copper alloy open work disk with possible animal motifs. Decorated with ring and dot on both surfaces. The dots are drilled. Incomplete.
Created on: Wednesday 2nd November 2005
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-D492B4
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Cast copper alloy openwork mount in the Urnes style. Decorated on one side with cast interlace, plain on the back. Irregular in plan but roughly tapers to a narrow end where it has broken. The opposite wider end has an off-centre pointed projection.
Created on: Thursday 5th January 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'NORTH YORKSHIRE', grid reference and parish protected.

Record ID: LVPL-FC08C5
Object type: DAGGER
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
Cast copper alloy dagger pommel dating to the Medieval period. The object is semi-circular in plan and domed. The object is hollow. At the top of the object is a sub-square opening and at the base a wide oval opening. The openings would have allowed the tang of the dagger to pass through the pommel. The opening at the top of the object is 6.67mm wide and 6.06mm in length. At the base of the object the opening measures 23.10mm in width and 6.81mm in length. At each end of the base of the object is a circular depression for attachment. The object has a brownish green patina. …
Created on: Thursday 2nd September 2010
Last updated: Thursday 30th September 2010
Spatial data recorded. This findspot is known as 'Ipstones', grid reference and parish protected.