Back to simple search | Back to advanced search

    You searched for:

    • Secondary identifier (obfuscated for security):0013EA168E00198C
    • Broad period:POST MEDIEVAL
    • Show this many records per page:10

  • Thumbnail image of LEIC-D0ED85

Record ID: LEIC-D0ED85
Object type: JEWELLERY FITTING
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
Description: A modern silver jewellery item, probably a head- or chest-ornament and dating to the nineteenth century. The ornament is circular with one projecting knop at the top and three projecting loops at the bottom. The projecting hooks are integral. Their rivet heads are circular with a single raised dome in the centre, surrounded by a concentric ring, the shafts project downwards and curve to the underside of the chatelaine where they reattach at the rear. The upper knop is much thicker than the lower loops, its rivet head replicates the lower hooks decoration. T…
Created on: Thursday 12th November 2020
Last updated: Tuesday 5th April 2022
Spatial data recorded.


  • Thumbnail image of WAW-AEBEF7

Record ID: WAW-AEBEF7
Object type: DRESS FASTENER (UNKNOWN)
Broad period: POST MEDIEVAL
County: Worcestershire
Workflow stage: Awaiting validation Find awaiting validation
Date: Circa AD 1500-1600 Description: An incomplete copper alloy and dress accessory of uncertain type. The object is circular in plan and sub-rectangular in cross-section. The face of the object is decorated with two inward facing scrolls in relief in each quarter, with a raised oval below where each scroll meets. There is a raised border around the perimeter. There very edge of the object is chipped around the circumference. There are five silver studs set at the centre and opposing quarters to the scrolls. The face of the object retains much gilding. The reverse of the object …
Created on: Thursday 30th April 2020
Last updated: Wednesday 8th September 2021
Spatial data recorded. This findspot is known as 'Inkberrow', grid reference and parish protected.


  • Thumbnail image of NARC-3C9F06

Record ID: NARC-3C9F06
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Mount of Post-Medieval date (AD 1650-1750). The object is composed of a large open work plate in the form of highly stylised floral motif, similar in form to a pot of lilies which (as the finder comments) is a symbol of Annunciation within Medieval Christian symbolism. The plate is composed of an upper trifoliate of lilies with incised lines on each to indicate petals. The stems join at the centre of the plate and converge into an inverted sub-triangular pot/vessel which expands out in the lower portion of the object to the rectangular body of the pot/vessel…
Created on: Tuesday 19th November 2019
Last updated: Wednesday 20th November 2019
Spatial data recorded.


  • Thumbnail image of NARC-3BF695

Record ID: NARC-3BF695
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Mount of Post-Medieval date (AD 1675-1725). The object is cast and is circular in plan and domed with a concave back and a central circular opening for a now missing pin. The upper surface of the object has a raised integral decorative pattern composed of six repeating human face with ovate eyes, long nose, thin mouth and linear grooves representing hair. Between each face is a large annulet in pellet, three raised squares and a second annulet in pellet. The back of the object is concave and undecorated with voids indicating the positioning of the decorative…
Created on: Tuesday 19th November 2019
Last updated: Wednesday 20th November 2019
Spatial data recorded.


  • Thumbnail image of KENT-AA1B15

Record ID: KENT-AA1B15
Object type: GUNFLINT
Broad period: POST MEDIEVAL
County: Kent
Workflow stage: Published Find published
A complete knapped probable gunflint blank from which gunflints for flintlock muskets of Post-Medieval date, c.AD 1600 - 1900, could be produced. Description: The flint is broadly rectangular in plan and resembles a stretched pillow shaped gunflint. with tapering sides and a trapezoidal cross-section. There is significant conchoidal rippling on the ventral side. The flint is dark grey with some mottled lighter areas. A probable accidental flake has been removed from the top edge. Measurements: 85.73mm long, 32.6mm wide, 11.22mm thick and 38.77g in weight. Discussion: Th…
Created on: Wednesday 20th June 2018
Last updated: Sunday 10th May 2020
Spatial data recorded.


  • Thumbnail image of NLM-A1D863

Record ID: NLM-A1D863
Object type: PISTOL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy object, kindly identified as part of a pistol or musket of English manufacture by Kevin Leahy. Kevin comments as follows: 'I think I know what this is: the long lug with a pin through it is typical of the way that English guns were fixed together and I think that what you've got is a bit of trigger guard from a flintlock or percussion gun'. Cast curved plate with U-shaped ends, one broader than the other, and with a long U-shaped lug projecting from its concave side. The lug has a filled drilled hole of diameter c.2mm, suggesting the object pivoted when in use. A fur…
Created on: Wednesday 20th June 2018
Last updated: Wednesday 4th November 2020
Spatial data recorded. This findspot is known as 'Normanby le Wold', grid reference and parish protected.


  • Thumbnail image of DENO-000BF2

Record ID: DENO-000BF2
Object type: HARNESS PENDANT
Broad period: POST MEDIEVAL
County: Nottinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A gilded lead horse harness pendant of post medieval date (c. 1700 - c.1800). It is in the form of an eight petalled flower, the lobate petals aranged around a cetral boss. Traces of gilding remain on all petals. The rear surface is flat and undecorated. There is a corroded iron pin 41 mm in length apparantly soldered as a replacement for the original suspension loop. Diameter is 39.5 mm, thickness 5.5 mm. Weight 38.4 g.
Created on: Thursday 31st May 2018
Last updated: Friday 22nd June 2018
Spatial data recorded. This findspot is known as 'East Nottinghamshire', grid reference and parish protected.


  • Thumbnail image of WMID-8748EC

Record ID: WMID-8748EC
Object type: CANNON BALL
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation Find awaiting validation
A cast iron Post Medieval cannon ball, probably dating to circa AD 1500 - 1700. The object is spherical in shape with pitting and corrosion visible on the surface. The cannon ball has an orange coloured patina across its surfaces. Abrasion caused by movement whilst within the plough soil may have resulted in the loss of some of the original surface detail and full diameter and weight. The diameter and weight suggest that the type of cannon used to fire the cannon ball may have been the Demi-Culverin. This cannon had a 4 inch bore and fired a ball weighing 9.5 lb (4309 g). Gordon…
Created on: Thursday 19th April 2018
Last updated: Wednesday 25th April 2018
Spatial data recorded.


  • Thumbnail image of CAM-417416

Record ID: CAM-417416
Object type: SWORD
Broad period: POST MEDIEVAL
County: City of Peterborough
Workflow stage: Awaiting validation Find awaiting validation
A late Medieval to middle Post-Medieval copper-alloy sword pommel. The open end has a flat blunt edge allowing the artefact to be placed standing unsupported on a flat surface. It has a variable thickness ranging from 0.9mm to 3.5mm at this open end. The artefact is an elliptical-cylindrical, measuring 22.5mm x 16.4mm at the open end, with a closed domed apex. At the centre of the domed end is a sub-rectangular aperture measuring 5.4mm x 2.2mm at the narrower end and 2.5mm at the wider end. This perforation would have been used to secure the pommel onto the shaft of the handle. This e…
Created on: Tuesday 21st November 2017
Last updated: Monday 18th June 2018
Spatial data recorded.


  • Thumbnail image of NLM-55DD82

Record ID: NLM-55DD82
Object type: BLOOM
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Iron metalworking debris. A large oval-ended furnace bottom or bloom [the finder's identification] with a flat top and near-vertical if irregular sides, formed either in the base of an iron ore burning furnace or in a channel cut to receive molten metal from such furnace. The object was retrieved from a reported depth of c.0.9m, and involved the cooperative labours of two people working at arms' length to extract it from the hole. Dr Kevin Leahy kindly comments that the object has the superficial appearance of cast iron, and that this would carry with it an implication of a date af…
Created on: Tuesday 29th August 2017
Last updated: Tuesday 26th September 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 183
Search server index: asgard

You are viewing records: 1 - 10.

Search statistics

  • Total quantity: 183
  • Mean quantity: 1.000
  • Maximum: 1

Filter your search

1 - 10 of 183 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.