Record ID: SUR-7CB627
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete medieval cast copper alloy single loop buckle with its plate. The frame probably would have had a thickened and decorated front edge, however it has broken across both sides close to the bar which is recessed and offset and retains the plate which is wrapped around it. The plate is undecorated and tapers towards the rear end. A portion of the copper alloy pin is retained on the bar.
Created on: Tuesday 23rd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

Record ID: SUR-7C9E78
Object type: STRAP END
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A complete medieval copper alloy composite strap end. Both plates and the spacer are retained; the plates are rectangular, tapering slightly to a rounded terminal with a small projection. Rivets are retained at the centre of the front and rear ends. There is no decoration. Circa 14th-15th century.
Created on: Tuesday 23rd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

Record ID: SUR-7C87B3
Object type: BUCKLE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
A pin from a medieval cast copper alloy disc-on-pin buckle pin of Redmayne's (2014) Type B. The disc is 11.4mm in diameter with a central recess which likely once held an inlay (see LIN-685A46). There is no decoration.
Created on: Tuesday 23rd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

Record ID: WMID-792746
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A copper alloy probable buckle fragment of Post Medieval date, c. AD 1550 - 1650. The object is only a fragment and consists of the centre part of the outer edge frame. It is pointed oval in cross section. It is decorated with a sub-triangular moulding, containing a raised lozenge shape and two annulets. Either side of this moulding is a raised collar. The reverse is undecorated.  The buckle is green / grey in colour with an even surface patina.  Measurements: length 16.4mm, width 6.6mm, thickness 3.9mm, weight 1.2 grams. The fragme…
Created on: Tuesday 23rd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

Record ID: WMID-787575
Object type: COIN
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A copper-alloy Roman dupondius of Claudius (AD 41-54), dating to the period AD 41-50 (Reece period 2). CERES AVGVSTA S C reverse type, depicting Ceres, veiled and draped, seated left, on ornamented throne, holding grain stalks in right hand and transverse torch in left. Mint of Rome, RIC I (2nd ed), no,.Claudius 94. Measurements: 23.8mm in diameter, 3.2mm in thickness, 6.4g in weight.
Created on: Tuesday 23rd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-68135E
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete cast copper-alloy stirrup terminal of late Early Medieval (Anglo-Saxon/Anglo-Scandinavian) date. The terminal has a hollow back that is semi-cylindrical in form and missing part of its attachment end due to old breaks. This contains traces of a white substance, probably used to solder the terminal to the now missing stirrup and is closed at the base. At the attachment end the front face of the terminal has a moulded collar formed from two narrow and projecting transverse ribs separated by a broader, bead-shaped rib. From the base of the object projects a flatten…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Monk Soham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-67F9D1
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy Roman radiate of Gallienus (AD 253-268), sole reign, dating to the period c.AD 263 (Reece Period 13). MARTI PACIFERO reverse type depicting Mars standing left holding branch, spear, and shield. Mint of Rome. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Worlingworth', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-67810D
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy Roman radiate or nummus unclear emperor dating to AD 260 to 402. Obverse: radiate bust right; Reverse: Standing figure left with standard. No clear inscription or mint mark.
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Worlingworth', grid reference and parish protected.

Record ID: NLM-673AFB
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation
Copper alloy coin. Nummus, of possibly of Constantine 1 (306-337), Gloria Exercitus issue of 330-331, Trier mint, Reece period 17, possibly RIC vol. 7 page 215 no. 525 Obverse description: head ?rosette diademed right, stiff upright hair, large eye, seen from front Obverse inscription: probably [CONSTANTI]  NVS MAX AVG Reverse description: two soldiers with two standards between them, long conical tops to standards. Reverse inscription: GLOR IA EXERC ITVS In exergue: probably TRS. Diameter: 16.6mm, Weight: 1.37gms, die axis: 6
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-66BA0E
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Roman nummus of Julian, dating to the period AD 355-60 (Reece period 18). FEL TEMP REPARATIO reverse type, depicting a soldier spearing a fallen horseman. Mint of Lyon. RIC VIII, Lyons no.198.
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded. This findspot is known as 'Hinderclay', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-66A670
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-allo, probable contemporary copy of a Roman nummus of the House of Constantine, dating to the period AD 330-340. Copying VRBS ROMA reverse type, depicting she-wolf and twins. 
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded. This findspot is known as 'Hinderclay', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-66A246
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Roman nummus of Gratian, dating to the period AD 367-75 (Reece period 19). GLORIA NOVI SAECVLI reverse type, depicting the emperor standing facing, holding shield and standard. Mint of Arles. c.f. LRBC, 56, no.511; RIC 15, Type xi(c)
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded. This findspot is known as 'Hinderclay', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-669E85
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Roman nummus of Constans, dating to the period AD 347-8 (Reece period 17). VICTORIAE DD AVGGQ NN reverse type, depicting two victories facing each other. Mint of Trier. LRBC, 6, no.140
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded. This findspot is known as 'Hinderclay', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6616A1
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A copper-alloy Roman As or dupondius coin dating 43-260AD. Unclear obverse or reverse type.
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Bromeswell', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-65FF9C
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Post-Medieval 17th-century trade token of William Bretton. Obverse: William. Bretton. Wheatsheaf Reverse: Of Yarmouth. B[aker]. = W.R.B.
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Sutton', grid reference and parish protected.

Record ID: SUSS-65B748
Object type: COIN
Broad period: ROMAN
County: West Sussex
Workflow stage: Awaiting validation
A Roman copper alloy nummus of Helena (AD 324-341) PAX PVBLICA reverse type, dating between AD 337-340. (Reece period 17). Unclear mint.  Dimensions: diameter: 13.75mm,  thickness: 1.71mm,  weight: 1.17g. This coin was found within 2m of three other late roman coins: SUSS-659128; SUSS-65834D and SUSS-6560F3.
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-65915A
Object type: TOKEN
Broad period: POST MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A complete copper-alloy Post-Medieval 17th-century trade token of Richard Mansvar, The Mercers' Arms. Obverse: RICHARD. MANSVAR Reverse: Welles. In. Norfolk = R. M. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Sutton', grid reference and parish protected.

Record ID: SUSS-659128
Object type: COIN
Broad period: ROMAN
County: West Sussex
Workflow stage: Awaiting validation
An incomplete Roman copper alloy barbarous radiate copying Tetricus II (AD 271-274) dating between AD 275-285 (Reece period 14).  PIETAS AVGG reverse type depicting sacrificial implements. Unclear mint prototype. Dimensions: diameter: 10.54mm,  thickness: 1.79mm,  weight: 0.68g. D/A: 7.  This coin was found within 2m of three other late roman coins:SUSS-65B748; SUSS-65834D and SUSS-6560F3.
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

Record ID: SUSS-6560F3
Object type: COIN
Broad period: ROMAN
County: West Sussex
Workflow stage: Awaiting validation
A complete Roman copper alloy nummus of Constantine I (AD 306-337) dating to AD 320. (Reece period 16). DN CONSTANTINI MAX AVG reverse type depicting VOT XX within wreath. Mint of Ticinum *//[P]T. Cf. RIC VII: p. 378 no: 130.  Diameter: 18.76mm,  thickness: 1.59mm,  weight: 1.74. This coin was found within 2m of three other late roman coins: SUSS-659128; SUSS-65B748 and SUSS-65834D.
Created on: Monday 22nd April 2024
Last updated: Tuesday 23rd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-655D61
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
A Roman copper-alloy nummus of Magnentius or Decentius (AD 350-353) dating to AD 353 (Reece Period 18). VICTORIAE DD NN AVG ET CAE reverse type depicting two victories holding wreath inscribed VOT/IV/MVLT/X, without supporting column. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Sutton', grid reference and parish protected.

Record ID: WMID-654A2D
Object type: BROOCH
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
A fragment from a copper-alloy brooch of Roman date, dating to c. AD 80-200. The fragment consists of just the bow. It is sub-triangular shape with a slightly concave reverse. No decoration is present on either side.  The object is a green / brown in colour and has a worn and abraded surface patina.  Measurements: 26.4mm length, 7.7mm width, thickness 3.5mm, weight 1.1 grams.
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

Record ID: WMID-652DAE
Object type: KEY (LOCKING)
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy tumbler lock slide key fragment of Roman date (c. AD 43 - 410). The fragment consists of only a small portion of the handle and a complete terminal. The key has a thickened, rectangular cross-section handle and is decorated with a series of moulded collars in different sizes, arranged two either side of a waisted centre section. An integral terminal is present on one end of the handle and is trefoil in shape with a circular perforation through the centre. There are two separated raised incurving points on the endmost foil that the wear suggest…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

Record ID: WMID-64BAE9
Object type: FINGER RING
Broad period: ROMAN
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete copper alloy finger ring fragment of Roman date (c. AD 43 - 300). The bezel is oval and has tapering shoulders that end at worn breaks. The hoop is incomplete. The bezel has a recessed circular cell to the upper surface and contains two raised circular pellets at either side of the cell. Any enamel in the recessed cell has been lost. The reverse of the bezel is concave.  The metal has a mid-green patina and is worn. It measures: 9.4mm in height, 12.5mm in length (bezel), 18.6mm wide, 5.5mm thick (bezel), and weighs 4.3 grams. Similar finger rings have be…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-649A08
Object type: UNIDENTIFIED OBJECT
Broad period: BRONZE AGE
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy object, probably a dirk, rapier or spearhead of Bronze Age date. The object is an elongated, sub-rectangular shape with breaks along both sides and end. It is slightly semi-circular in cross-section with a slight flattened ridge running along the centre of each face. The surface of the metal has some pitting, and the edges are well worn. Length: 47.07mm Width: 15.38mm Weight: 10.00g
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-645BF1
Object type: KNIFE
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
A fragment of a copper-alloy Roman open work hound and hare folding knife handle. All that remains is the terminal end, depicting the tail of the hound which touches the solid rectangular part of the handle. It has two parallel pairs of vertical decorative grooves across it and its upper edge is moulded. At its terminal end the vertical slot, which runs through it and the rest of the handle, can be seen. It has an circular perforation, near to its lower edge, which would have held an iron rivet to hold the iron blade in place and allowed it to have been moved freely in and out of …
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Bottisham', grid reference and parish protected.

Record ID: LANCUM-644668
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Late Medieval to Post Medieval copper alloy double loop buckle frame. It is the same form as Whitehead No.291. The frame is complete but the tongue is absent. Dates to between c1350 and c1650 AD. Length 34mm, width 24mm.
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'near Skipton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-643FEE
Object type: MOUNT
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A complete gilded copper-alloy early-medieval (early Anglo-Saxon) mount, perhaps from a shield-boss apex, possibly from a horse's harness. It consists of a circular copper-alloy plate with a raised beaded border around the outside of the outer face and raised chip-carved Style II zoomorphic interlace decoration in the centre, with a central circular recess on the front and two concentric recessed circles around it. There is evidence of gilding on the face, The reverse is covered with a thick layer of corroded iron, but has two raised ribs which could be the ends of two copper-…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Westley Waterless', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-641E1E
Object type: PALSTAVE
Broad period: BRONZE AGE
County: Cambridgeshire
Workflow stage: Awaiting validation
An incomplete looped transitional palstave axehead dating to the Middle-Late Bronze Age dating from about 1250 - 950BC. The palstave is a transitional type with a deeply undercut stop. All that remains is the centre of the axehead, with the terminals of the blade and butt missing. It is encrusted with corrosion.  It has a thin butt with flanges that expand from the extant areas of the butt to the stop in a triangular shape. The tallest part of the flange is at the stop. The stop ridge is curved and forms a small socket (is deeply undercut but filled with corrosion)…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Lode', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-63C406
Object type: BROOCH
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman continental plate brooch dating to 25-250AD. It is an elongated lozenge, with a circular recess with a extant stud. To the reverse are the remains of a semi-circular catchplate and pin lug, although the pin is missing.  Length: 31.81mm Width: 18.69mm Weight: 1.72g
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Dullingham', grid reference and parish protected.

Record ID: WMID-638010
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A copper alloy four way strap distributor of Medieval date (c. AD 1100-1300).  The distributor is a frame that is square externally (with sightly convex edges) and has a quatrefoil perforation internally. On the front, at each corner, there is a thickened square boss. Between the bosses are four constrictions at the centre of each side, for the missing attachment loop strap ends. The reverse is flat and undecorated. The object is dark green in colour with an uneven surface patina.  Measurements: length 16.4mm; width 16.9mm; thickness 4.2mm; weight 3.6 grams. …
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-637A85
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
An incomplete early Medieval (Anglo-Saxon) radiate-head brooch dating to AD 500-570. The base of the foot and pin are missing; but is otherwise complete. The head is broadly cruciform in plan, with a semi-circular head plate and three semi-cylindrical projections. A slightly curved bow projects from the flat edge of the headplate before tapering outwards to terminate in an old break. Two lugs are on the back of the head plate where the pin would have attached, though the pin is no longer present. There are the remains of the catchplate, broadly rectangular…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Bottisham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-634247
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete Roman as or dupondius of uncertain ruler, dating to the period c.AD 43-260. Uncertain reverse type and mint. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6322CA
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete Roman as or dupondius of uncertain ruler, dating to the period c.AD 43-260. Uncertain reverse type and mint. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-63108C
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
A fragment of an early medieval (Anglo-Saxon) copper alloy small-long brooch. Only the foot of the brooch and a part of the bow survives. The bow fragment is D-shaped in cross-section with a steeply D shaped curve and a raised rectangular panel decorated with transverse grooves across its lower end. The foot has flattened rectangular cross-section and a straight upper section, flaring into a spatulate terminal at its lower end. The outer face of the straight section has, from top to bottom, a plain section with bevelled sides, followed by two fine, transverse grooves, then a …
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Hethersett', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6304D1
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete Roman as or dupondius of uncertain ruler, dating to the period c.AD 43-260. Uncertain reverse type and mint. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-62E973
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Early Medieval (Anglo-Saxon) ansate brooch dating to 800-1000AD.  The bow is rectangular in section with a central arch. At the highest point of the bow is a raised rectangular panel. The front face of the panel is decorated with two transverse grooves. At both ends of the bow are tri-lobed terminals. The front faces are decorated with one central longitudinal groove with a diagonal groove to either side. To the reverse is the catchplate which is a simple strip that projects rearward from one side of the brooch, tapers in width almos…
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Bottisham', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-62C254
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete Roman as or dupondius of uncertain ruler, dating to the period c.AD 43-260. Uncertain reverse type and mint. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

Record ID: LEIC-62A8A3
Object type: COIN
Broad period: ROMAN
County: Leicestershire
Workflow stage: Awaiting validation
An incomplete Roman copper-alloy nummus of the House of Valentinian dating to c. AD 364 - 375. (Reece Period 19) GLORIA ROMANORVM, reverse type shows the emperor dragging a captive and holding a standard. Mint uncertain. Diameter: 17.6 mm Weight: 1.27 g
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-6294FC
Object type: COIN
Broad period: ROMAN
County: Suffolk
Workflow stage: Awaiting validation
An incomplete Roman radiate or nummus of uncertain ruler, dating to the period c.AD 260-402. Uncertain reverse type and mint. 
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Nedging-with-Naughton', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6293C0
Object type: BROOCH
Broad period: ROMAN
County: Cambridgeshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman enamelled plate brooch. It is disc-shaped and its outer face is decorated with a raised ring around the outer edge and two smaller concentric raised rings in the centre. The three fields between these rings contain a white paste, with the middle ring retaining red enamel. To one side of the reverse there is a single-lug pin fitting covered with corroded iron and to the other side the remains of a small catch-plate, its hooked outer edge missing. It survives in fairly good condition. It has a white metal coating, and a light green patina. …
Created on: Monday 22nd April 2024
Last updated: Monday 22nd April 2024
Spatial data recorded. This findspot is known as 'Bottisham', grid reference and parish protected.