Back to simple search | Back to advanced search
You searched for:
Record ID: SF-2D58FB
Object type: CHAPE
Broad period: MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of an iron probable late medieval to early post-medieval scabbard chape. Only the lower end of the object survives. This is a cast, hollow flat triangular chape with a jagged break around its upper edge and a flattened globular terminal projecting from its lower end. The surface of the metal is heavily corroded.
Scabbard chapes are more commonly made from sheet metal, but cast examples in copper alloy and iron are known. Compare PAS records: PUBLIC-03A532, LON-0444D0 and WMID-C808A3. It seems likely to be of late medieval to early post-medieval date.
Le…
Created on: Tuesday 26th March 2024
Last updated: Tuesday 26th March 2024
Spatial data recorded.
This findspot is known as 'Cotton', grid reference and parish protected.
Record ID: GLO-05105E
Object type: SLAG
Broad period: UNKNOWN
County: Gloucestershire
Workflow stage: Awaiting validation
Five fragments of bloomery slag that appear to have been produced from the tapping process. All display smooth molten ridges and channels on the face characteristic of runs of solidified molten taped slag. Where broken the core is seen to be dense but filled with abundant, small bubbles and cavities.
These fragments measure
1, 35mm by 33mm
2, 50mm by 35mm
3, 70mm by 50mm
4, 42mm by 30mm
5, 115mm, by 80mm
Created on: Tuesday 12th March 2024
Last updated: Tuesday 12th March 2024
Spatial data recorded.
Record ID: IOW-9CC73D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
A corroded Post Medieval-Modern iron single loop trapezoidal buckle, c.AD 1750-1970.
This buckle is complete and consists of a trapezoidal frame and an iron pin which has a raised ridge near the frame. This ridge or 'grip' was probably to allow more pressure to be applied to the pin when undoing or doing up the buckle. The strap (and pin) bar is the longer of the two unequal edges. The shorter edge retains a sheet iron roller.
Created on: Thursday 7th March 2024
Last updated: Monday 18th March 2024
Spatial data recorded.
This findspot is known as 'Isle of Wight', grid reference and parish protected.
Record ID: WMID-731076
Object type: SHOE
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
A 19th century iron shoe patten.
The object consists of an oval shaped body, with fixtures that project on either side. One extends upwards before bending at a right angle, followed by a circular plate with a nail affixed to it, and a final rectangular lug extending outward and terminating in a break. The other side has a similar attachment, but the plate is trapezoidal in shape and has two nails. The object has an abundance of rust.
Measurements:
Height: 47.5mm
Length: 189mm
Width: 86.8mm
Thickness of iron bar: 7.9mm
Weight: 122.9g
A patten was an over-sh…
Created on: Tuesday 5th March 2024
Last updated: Monday 11th March 2024
Spatial data recorded.
Record ID: SUR-59B5DC
Object type: CANNON BALL
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A cast iron ball, 53.5mm (c. 2.1 inches) in diameter and weighing 491.63g (c. 17 oz). The ball is heavilly corroded and otherwise featureless.
Possibly a cannon ball from a piece of light field artillery such as a Falconet or Falcon, which had nominal bore sizes of 2 inch or 2.5 inches respectively.
Created on: Monday 4th March 2024
Last updated: Monday 4th March 2024
Spatial data recorded.
Record ID: WMID-1DD124
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Staffordshire
Workflow stage: Awaiting validation
An incomplete lock escutcheon from a piece of furniture, of Post Medieval dating (AD 1700 to AD 1800).
The lock escutcheon is irregular in shape, but with a flat cross section. Iron corrosion products do obscure the surface. The lock escutcheon has a pelta shape above with a sunburst stamp on a it. The lock escutcheon is irregular in shape, with a semi-circular top with a squared lys terminal at the base.
It measures 46.4 mm in length, 49. 8 mm wide and 10.3 mm thick. It weighs 31.9 g.
Created on: Friday 1st March 2024
Last updated: Friday 1st March 2024
Spatial data recorded.
Record ID: LANCUM-F50F1D
Object type: AXEHEAD
Broad period: MEDIEVAL
County: Cumbria
Workflow stage: Awaiting validation
An axehead that was found in association with a cauldron, LANCUM-DA7471. The blade is basically rectangular but longer on the underside that the top, which is slightly concave. The socket is triangular. Parallels on the database include LVPL-AEA265 and SWYOR-9FA1C6, which are dated between AD 1000 and 1600
Dimensions: It is 210mm long and 80mm wide, and it is 60mm deep. It weighs 1475g
Created on: Wednesday 28th February 2024
Last updated: Thursday 29th February 2024
Spatial data recorded.
This findspot is known as 'Near Casterton', grid reference and parish protected.
Record ID: NARC-377D73
Object type: HORSESHOE
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete iron Horseshoe of Medieval date (AD 1150-1350). Clark's (1995) Type 2B, 'wavy-edged' horseshoe type. The object is composed of one half of its original form, with an old, abraded break. The retained portion has an inner raised ridge with three rectangular countersunk nail holes and a retained calkin at the lower end.
Length: 93.75mm, Width: 57.25mm, Thickness: 10.08mm, Weight: 56.0g
Created on: Monday 19th February 2024
Last updated: Friday 23rd February 2024
Spatial data recorded.
Record ID: GLO-F72CDB
Object type: HOARD
Broad period: ROMAN
County: Gloucestershire
Workflow stage: Awaiting validation
This is a sword assemblage consisting of two complete Roman long swords of the type called a spatha together with items that would be appropriate for complete scabbard and sword belt fittings.
The assemblage consists of:
A) Sword 1: A complete roman long sword with scabbard chape still attached at the tip. The sword is 920mm long, 55mm at widest point at the hilt and gently taper to 42 mm near the tip, the tip is covered by the scabbard chape making it impossible to ascertain its shape. The blade looks to be lenticular in cross-s…
Created on: Friday 16th February 2024
Last updated: Wednesday 21st February 2024
Spatial data recorded.
This findspot is known as 'Willersey', grid reference and parish protected.
Record ID: IOW-B48F64
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Fragment of a Post Medieval cast iron possible lock plate or escutcheon, c.AD 1700-1800.
This is part of a cast plate with a floral pattern in relief on the obverse. The obverse is concave with one side of an apparent keyhole in the centre. The plate has three straight sides along its edge, suggesting the whoe plate was octagonal in plan.
Created on: Tuesday 13th February 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.
This findspot is known as 'Isle of Wight', grid reference and parish protected.
Record ID: IOW-B46CBE
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
An incomplete Post Medieval iron double-looped buckle, c.AD 1500-1650.
This is half of a double-looped buckle; the frame is flat and has bevelled edges, with a thicker section where the spindle would have been drilled. The strap bar and pin are missing, along with the other half of the frame. The obverse of the frame appears to have a series of moulded, circular decorations, but wear and corrosion has made these unclear.
The buckle has a mid-brown patina.
Created on: Tuesday 13th February 2024
Last updated: Wednesday 6th March 2024
Spatial data recorded.
This findspot is known as 'Isle of Wight', grid reference and parish protected.
Record ID: NLM-2322FB
Object type: CROSSBOW BOLT
Broad period: POST MEDIEVAL
Workflow stage: Awaiting validation
Iron arrowhead. Iron bolt from a crossbow. Suggested date: Post-Medieval, 1500-1600
Length: 42.5mm, Width: 10.6mm, Thickness: 10.1mm, Weight: 7.96gms
Created on: Tuesday 6th February 2024
Last updated: Tuesday 6th February 2024
No spatial data available.
Record ID: NLM-22F7C5
Object type: ARROWHEAD
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Iron arrowhead. Wrought iron socketed broad-blkaded or general purpose arrow head. Suggested date: Late Medieval, 1350-1450
Length: 65.6mm, Width: 26.5mm, Thickness: 8.6mm, Weight: 13.04gms
Created on: Tuesday 6th February 2024
Last updated: Tuesday 6th February 2024
Spatial data recorded.
Record ID: OXON-A3600D
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation
A very corroded, incomplete, iron Roman brooch dating to c. AD 1st-2nd centuries. Probably Polden Hill type, although any detail of the bow or head is now obscured by the corrosion layer. The brooch is missing its pin, spring and catchplace, and only a small section of the bow survives.
The brooch is 18.21mm long, 16..27mm wide, 5.02mm thick and weighs 3.95 grams.
Created on: Wednesday 31st January 2024
Last updated: Friday 15th March 2024
Spatial data recorded.
Record ID: YORYM-7CBCCA
Object type: CANNON BALL
Broad period: POST MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A complete iron cannon ball of Post-Medieval date, c.AD 1500 - 1700. The cannon ball is spherical with an irregular corroded exterior surface.
Due to corrosion it may be smaller than originally made. However, its present diameter and weight may indicate that it was used in a minion cannon.
Diameter: 74.5mm (2.93 inches). Weight: 1729g (3.8lbs).
The minion was a type of smoothbore cannon used during the Tudor period and into the late 17th century.
Cast iron roundshot is rarely found on battlefields, even though records suggest that it was the normal long-range ammunition; cannon may…
Created on: Monday 29th January 2024
Last updated: Wednesday 14th February 2024
Spatial data recorded.
Record ID: OXON-3C02E4
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A large Post-Medieval to Modern iron key, dating from c. AD 1600-1900. The bow is kidney-shaped, with the stem projecting into the bow. The stem is corroded, but is essentially sub-circular in cross-section and becomes smaller in diameter at the point where the bit is attached. The bit consists of two wands that are roughly symmetrical in shape: each has one cleft on one (the outer) side and two clefts on the other (inner) side. The stem then extends for 12mm beyond the bit.
The surface of the key is rough and mostly a reddish orange colour, with multiple white patches.…
Created on: Friday 26th January 2024
Last updated: Wednesday 31st January 2024
Spatial data recorded.
Record ID: NLM-277965
Object type: HECKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Iron heckle comb. A ferrous metal bar with a central part of width 26mm, thickness 4.7mm and of V-section with narrowed and thickened [to 5mm] projections of length 55mm at either end with a step on their upper edges; and a serrated ‘blade’ with three points per cm extending for 109mm along the lower edge, clasped within a thin [1.8mm] ferrous metal case with a curved upper edge, of which some is probably lost. There is an E-shaped attachment secured at the end of each bar of its E on top of the case, both probably having been attached to a handle [lost]. Either for fibre p…
Created on: Thursday 25th January 2024
Last updated: Thursday 25th January 2024
Spatial data recorded.
This findspot is known as 'Low Burnham', grid reference and parish protected.
Record ID: SUSS-126978
Object type: HORSESHOE
Broad period: MEDIEVAL
County: East Sussex
Workflow stage: Awaiting validation
A complete Late Medieval to Early Post Medieval iron horseshoe dating c. AD 1350-1550.
The shoes is complete with a broad web and two rectangular nail holes one branch and and four on the other. The nail-holes flare inwards from the ground surface of the shoe and the shoe has a smooth outside edge. The inner arch extends to a rounded point at the apex. A right angled calkin protrudes from one heel.
Measurements: length 120.83mm, width 122.44mm, width of web 41.75mm, thickness at toe 9.48mm, thickness at calkin 18.85mm, weight 2…
Created on: Wednesday 24th January 2024
Last updated: Thursday 8th February 2024
Spatial data recorded.
Record ID: SUSS-1137A4
Object type: HORSESHOE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A complete Late Medieval to Early Post Medieval iron horseshoe dating c. AD 1350-1550.
The horseshoe is Clark's type 4, with a broad web. There are three rectangular nail holes on each branch and no countersinkings; the nail-holes flare iinwards from the ground surface of the shoe and the object has a smooth external edge. The inner arch extends to a point at the apex. There is a worn right angled culkin on one branch terminal.
Measurements: length 101.14mm, width 104.19mm, width of web 34.62mm, thickness at toe 10.26mm, thickness at calki…
Created on: Wednesday 24th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.
Record ID: SUSS-10262D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A corroded and incomplete Post Medieval iron shoe buckle with a loop chape and pitchfork tongue dating c. 1720-1790.
The rectangular frame is undecorated with rounded corners and is drilled to accommodate the separate spindle. Attached to the spindle is a pitchfork tongue and the stubs of the base of a loop chape. The side profile of the frame is curved to fit the foot. The object is covered in orange and brown corrosion.
Measurements: length 48.11mm, width 59.29mm, thickness 3.65mm, weight 24.78g.
Similar examples are illustated in Whitehead (2003) p. 104 and 10…
Created on: Wednesday 24th January 2024
Last updated: Friday 9th February 2024
Spatial data recorded.
Record ID: SUSS-0F8133
Object type: BUCKLE
Broad period: MEDIEVAL
County: West Sussex
Workflow stage: Awaiting validation
A complete Medieval to Post Medieval iron assymetrical buckle with double strap/pin bar dating c. 1350-1700.
The frame is asymmetrical with a D-shaped loop and a flat transverse bar separating the D-shaped loop from the trapezoidal half. A second flat bar dividing the trapezoidal half functions as the pin bar, with a waisted centre to accommodate the wrap around pin. Both bars are decorated with grooves running inside each long edge. The triangular pin is flat with moulded decoration comprising two rectangular panels separated by a broad transverse g…
Created on: Wednesday 24th January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.
Record ID: IOW-E61E64
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Isle of Wight
Workflow stage: Awaiting validation
Post Medieval-Modern cast copper alloy buckle, c.AD 1800-1900.
This is a cast sub-rectangular frame of round section with a nick on its outer edge serving as a pin rest and with a slightly wavy profile with the strap bar set back from the frame. Rust stains on the strap bar and pin rest may suggest this was deposited with an iron pin attached, now lost. The robust construction may suggest use with horse or bridle harness.
Created on: Monday 22nd January 2024
Last updated: Thursday 1st February 2024
Spatial data recorded.
This findspot is known as 'Isle of Wight', grid reference and parish protected.
Record ID: LEIC-A5CB62
Object type: SPEARHEAD
Broad period: UNKNOWN
County: Nottinghamshire
Workflow stage: Awaiting validation
An incomplete socketed Iron spearhead of uncertain date, dating to c.AD 43 - 1600. The working end and some of the socket are missing. The socket is open and would be circular in section if complete. It extends, narrowing, to an incomplete leaf shaped blade which is lentoid in cross-section, no decoration is apparent. The object is heavily corroded.
Length: 131.3 mm
Width: 36.1 mm
Weight: 113.15 g
Created on: Friday 19th January 2024
Last updated: Friday 26th January 2024
Spatial data recorded.
Record ID: CAM-6A60F1
Object type: SPEARHEAD
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A single iron spearhead of Early-Medieval date (c.6th to 7th century AD). Swanton type E3. The spearhead is almost complete but in bent condition. The remains of the head weigh c.362.0g. Use of a flexible dress-maker's tape-measure shows the artefact to have had a length of c.347mm and in its current bent condition it occupies a straight length of c.339mm between tip and socket end. The maximum width, across the head's shoulders, is 46.2mm. The thickness at that location is c.12.7mm. The spearhead has a very shallow lozenge shaped cross-section along its length. …
Created on: Tuesday 16th January 2024
Last updated: Tuesday 20th February 2024
Spatial data recorded.
This findspot is known as 'South Cambridgeshire District Area', grid reference and parish protected.
Record ID: LANCUM-142AF3
Object type: GAMING PIECE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
An iron token or weight which has possibly been converted to a gaming piece. If formerly a weight it would approximate to 1/2 ounce, but account must be taken of metal lost through corrosion. It is badly corroded but on both sides a symbol has been scratched into the surface post manufacture, which consists of two triangles joined in line with each other at the point. Rust is evident on both faces
Dimensions: It is diameter 28.4mm and 2.48mm thick, it weighs 12.5g
Created on: Friday 12th January 2024
Last updated: Friday 12th January 2024
Spatial data recorded.
This findspot is known as 'Near Clayton le Woods', grid reference and parish protected.
Record ID: SUR-110B21
Object type: HORSESHOE
Broad period: POST MEDIEVAL
County: Surrey
Workflow stage: Awaiting validation
A bent and extremely corroded iron horsehoe of post medieval date. The central aperture has a maximum width of 48mm and is keyhole shaped. The shoe has a web of 43mm maximum width and lacks calkins or a toe clip. There is no evidence of fullering. The degree of corrosion makes the nailhole count difficult to determine.
Created on: Friday 12th January 2024
Last updated: Friday 12th January 2024
Spatial data recorded.
Record ID: SWYOR-C038B9
Object type: CHISEL
Broad period: UNKNOWN
County: Kirklees
Workflow stage: Awaiting validation
An iron chisel, splitter or other tool of unknown date, Roman - Post Medieval, AD 43 - 1950. The chisel is wedge shaped at the widest point, although very rusted. It tapers sharply to the narrow end which is a rounded lozenge shaped in cross-section. Although it is thin at the wide working end, it is thicker towards the narrow end, possibly with slightly concave faces where it narrows. Length: 165mm; Width: 64.37mm; Thickness: 25.53mm and Weight: 566g.
Manning (1976) illustrates similar chisels dated from the Roman period including page 48 item 59, d…
Created on: Monday 8th January 2024
Last updated: Sunday 28th January 2024
Spatial data recorded.
Record ID: LANCUM-7E5C76
Object type: NAIL
Broad period: ROMAN
County: Lancashire
Workflow stage: Awaiting validation
An iron hobnail of probable Roman date. It has a pyramidal head, under this is a neck before the shank, which is square in section. The shank bends towards the tip, which is rounded. A similar example is SUR-7D0489
Dimensions: It is 27mm long and 8mm diameter, it weighs 3.34g
Created on: Friday 5th January 2024
Last updated: Thursday 18th January 2024
Spatial data recorded.
This findspot is known as 'Near Carnforth', grid reference and parish protected.
Record ID: LANCUM-7E50E6
Object type: HORSESHOE
Broad period: POST MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
An large iron horseshoe. It is keyhole shaped, with a toe clip and calkins on both branches. Six rectangular holes are visible on one branch, there is no fullering. It is most likely to be a draught shoe of the late 19th century.
Dimensions: 190mm long and 195mm wide
Created on: Friday 5th January 2024
Last updated: Friday 19th January 2024
Spatial data recorded.
This findspot is known as 'Near Carnforth', grid reference and parish protected.
Record ID: OXON-407535
Object type: BUCKLE
Broad period: MEDIEVAL
County: Warwickshire
Workflow stage: Awaiting validation
A complete Medieval cast Iron annular buckle with cast iron pin, probably dating to c. AD 1200-1450.
The frame is circular in plan, and oval in cross-section, with no constriction for the pin. The frame is undecorated. The pin is also made of iron that is circular in cross section with an expanded circular terminal which wraps around the frame of the buckle.
The buckle is badly corroded and an orange brown colour
The frame is is c.50.3mm in diameter, c.3.8mm wide and thick. The pin c.52.5mm long from its loop to its rounded point and is 11.7mm thick.
…
Created on: Tuesday 2nd January 2024
Last updated: Wednesday 3rd January 2024
Spatial data recorded.
Record ID: SUR-42ABFF
Object type: HOB NAIL
Broad period: ROMAN
County: Buckinghamshire
Workflow stage: Awaiting validation
An iron hobnail of probable Roman date. The head is subrectangular in section and subconical in profile. The shank is curved and around 8.5mm in length.
Created on: Thursday 21st December 2023
Last updated: Thursday 21st December 2023
Spatial data recorded.
Record ID: SUR-41B61D
Object type: STIRRUP
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation
A complete and decorated iron stirrup of medieval date (c. 14th-15th century). The stirrup is triangular in shape and asymmetrical, with the left side notably longer than the right. The top of the stirrup has a narrow strap bar with a plate running around the front to protect the strap. This plate has a slight point in the middle of the upper edge and a decorative scalloped border bound by an incised line across the lower edge (second image). The sides of the stirrup are around 13mm wide with a flat cross section. The footrest is sightly oval in shape, widening to 28.8mm wide at t…
Created on: Thursday 21st December 2023
Last updated: Thursday 21st December 2023
Spatial data recorded.
Record ID: ESS-1D194C
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Cambridgeshire
Workflow stage: Awaiting validation
A group of two iron knives of probable early medieval date (c.410-1066).
Knife 1:
Description: The knife remains as the complete blade and tang. The blade is oval in cross-section and triangular in plan with a straight top edge which slopes downwards slightly at the tip. At the other end, the top edge rises to a curve straightening again along the top edge of the tang which also slopes downward slightly. The bottom edge of the blade is angled consistently towards the tip where it sharply curves upwards. At the tang end, the blade meets the tang at a c.45 degree angle. The t…
Created on: Tuesday 19th December 2023
Last updated: Thursday 1st February 2024
Spatial data recorded.
Record ID: SWYOR-0435D4
Object type: MATTOCK
Broad period: UNKNOWN
County: Kirklees
Workflow stage: Awaiting validation
An incomplete corroded iron mattock, adze or pick of uncertain date, Roman to Post Medieval, AD 43 - 1950. It is sub-rectangular, tapering to a thin, incomplete wide and at one end, and narrowing and thickening to an incomplete socket at the other end. The blade is broken across the socket for the handle. On one face there are narrow flanges running from the socket down each side of the blade and round the socket.
Length: 148.34mm
Width: 63.47mm
Thickness: 14.05mm
Weight: 283g
See Manning (1976) items 65 and 66, page 26, illustrated page 49, fig.16 which are …
Created on: Monday 18th December 2023
Last updated: Sunday 28th January 2024
Spatial data recorded.
Record ID: SWYOR-0264F2
Object type: BUCKLE
Broad period: MEDIEVAL
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
A incomplete Medieval cast Iron annular buckle with cast iron pin, probably dating to AD 1200-1450 or later.
The frame is circular in plan, and oval in cross-section, with no constriction for the pin. The frame is undecorated. The pin, which is broken off at about two thirds of its length, is also made of iron that is circular in cross section and then divides into an expanded circular loop which wraps around the frame of the buckle. The buckle is badly corroded and an orange brown colour. Measurements are; total length 60.6mm, diameter of the ring 56.3mm…
Created on: Monday 18th December 2023
Last updated: Sunday 21st January 2024
Spatial data recorded.
Record ID: LANCUM-85C339
Object type: HORSESHOE
Broad period: EARLY MEDIEVAL
County: Lancashire
Workflow stage: Awaiting validation
A probable iron horseshoe. The toe and one branch survive. Although it may be a result of corrosion the outside edge of the shoe appears to be wavy edged. One side of the shoe is flat, the other slightly curved. The remains of round headed nails are seen in possibly two of the holes, which coincide with the shape of the rim. There are other holes, six in total, the one at the end of the shoe being elongated, although these are now filled with corrosion products. The size and the wavy rim suggest an eary medival date for this.
Dimensions: The surviving part of…
Created on: Tuesday 12th December 2023
Last updated: Wednesday 3rd January 2024
Spatial data recorded.
This findspot is known as 'Near Carnforth', grid reference and parish protected.
Record ID: SWYOR-703FD4
Object type: PADLOCK
Broad period: MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper plated iron barrel padlock of early medieval to medieval date, about AD 950 - 1400, perhaps more likely to be from the later end of the range suggested. Only a fragment of the case survives. It is part of a cylinder made of iron with a copper alloy surface coating. The outer face is decorated with longitudinal ridges. Only part of one end plate survives and it is not clear if the incomplete hole in it is an intentional keyhole or corrosion. Measurements are; length 34.1mm, width 26.6mm, thickness 14.9mm and weight 15.0g.
Compare WMID-D898F7, BUC-BBEC0A a…
Created on: Monday 11th December 2023
Last updated: Tuesday 23rd January 2024
Spatial data recorded.
Record ID: CORN-6093E5
Object type: CAULDRON
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation
Fragment of an iron-alloy cauldron/pot leg.
Due to the nature of this object, it is hard to date exactly, but iron cauldrons were in common use throughout the post-Medieval periods, and into the Victorian era.
Weight: 70.4g
Dimensions:
Remaining body length: 49mm
Remaining body width: 32mm
The leg is at a slant, so two measurements were taken.
Leg height (min.): 24mm
Leg height (max.): 36mm
Average leg height is therefore: 30mm
Created on: Tuesday 28th November 2023
Last updated: Thursday 15th February 2024
Spatial data recorded.
Image not taken
Record ID: SF-5EAD57
Object type: ASSEMBLAGE
Broad period: UNKNOWN
County: Suffolk
Workflow stage: Awaiting validation
An assemblage of four ferrous nails of an uncertain date. Each has rectangular-sectioned shanks and flat rectangular heads.
1. Length: 46mm; Width: 5.2mm; Thickness:3.2mm: Head width: 11.8mm; Weight: 5.00g
2. Length: 64mm; Width: 6.5mm; Thickness: 6.5mm; Head width: 14.2mm; Weight: 11.36g.
3. Length: 34.6mm; Width: 7.00mm; Thickness; 6.8mm; Head width: 9.4mm; Weight: 5.28g.
4. Length: 24.2mm; Width: 2.6mm; Thickness: 2.5mm; Head with: 11.3mm; Weight: 1.46g.
Created on: Tuesday 28th November 2023
Last updated: Tuesday 28th November 2023
Spatial data recorded.
This findspot is known as 'Near Hemingstone', grid reference and parish protected.
Record ID: SWYOR-4B11A7
Object type: UNIDENTIFIED OBJECT
Broad period: ROMAN
County: East Riding of Yorkshire
Workflow stage: Awaiting validation
An incomplete iron artefact, of Roman date, AD 41 - 410. It is sub-rectangular in plan, square at one end and tapering and curving to a rounded point at the other. The main body of the artefact is thicker along one edge than the other and the rounded point, which is set at a slight angle to the orientation of the main portion, is also thinner than the main body. One side of the main body is flat and the other side is slightly concave, though this may be a consequence of the heavy degree of corrosion. The artefact is 84.2mm long, 31.4mm wide and 13.1mm thick. It weighs&nb…
Created on: Monday 27th November 2023
Last updated: Sunday 25th February 2024
Spatial data recorded.
Records per page: 10 20 40 100
Sort your search by:
Which direction?
Total results available: 4,814
Search server index: valhalla
You are viewing records: 1 - 40.