• 

  Image not taken

Record ID: NMS-E39636
Object type: KNIFE
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Iron strip, perhaps the blade from a knife. It is 120mm long and one end is encased in delaminating corrosion. Away from this end, it is generally around 19mm wide, with one edge straight and 3mm thick, tapering to the other edge which may represent the cutting edge. The end without the corrosion layers has the cutting edge curving up to meet the back of the blade in a rounded point. The corroded end is broken and has no evidence of a whittle tang. The strip is now bent at a slight angle about halfway along its length. It weighs 45.0g. The identification as a knife is very t…
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-E36935
Object type: RING
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Neatly circular iron ring, 51.5mm in diameter. In cross-section it is circular, 8mm in diameter. It weighs 31.8g. The ring was found close to several early Anglo-Saxon objects and is likely also to be of that date. It may have been used as a suspension ring.
Created on: Tuesday 16th April 2024
Last updated: Tuesday 16th April 2024
Spatial data recorded.

Record ID: NARC-D2CEFB
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Northamptonshire
Workflow stage: Awaiting validation
An incomplete copper alloy Pin of Early-Medieval date (AD 700-800). The object is composed of a sub-rectangular flat head plate with an integral circular sectioned shaft projecting from the lower edge of the head. The upper edge of the head plate is broken and abraded. There is a raised circumferential collar at the junction between the plate and shaft. The lower end of the shaft tapers to a sharp point. The head plate is decorated with a design in relief composed of am interlace motif with gilding retained within the recessed portions. The back of the head plate is undecorated,…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D2C402
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
About half of the flat circular frame of an early Anglo-Saxon copper-alloy annular brooch, with an original diameter of c. 40mm. One break is across a neat rounded hole in the frame. This may be the pin hole, but on the reverse there is solder around the hole and it may possibly alternatively be a repair. There is also some iron corrosion on the reverse here, which could be from the pin. The frame is otherwise well preserved here, and at 6.1mm wide appears to retain its original width. The inner edge is 1.2mm thick and it tapers towards the outer edge which is 0.6mm thick. Th…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D16462
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of copper alloy, probably a small piece of foot from an early Anglo-Saxon cruciform brooch. The fragment is C-shaped in cross-section, hollow on the reverse, and is broken at both ends (one break fairly fresh and granular, the other more worn). At one end, the front has a bold moulding, 4-5mm deep and flat-topped, which is divided into two by an off-centre transverse groove. The overall surviving length is 21.1mm, maximum width 12.8mm and maximum thickness (at moulding) 6.0mm. It weighs 4.93g. It seems likely that this is one of the mouldings at the top of a horse's …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0E282
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat, apparently undecorated headplate has a sub-rectangular central panel with three flat 'knobs', all of which appear to have been mushroom-shaped, or D-shaped above narrowed waists. This shape of headplate is often known as 'trefoil'. On the reverse of the headplate is a broken pin bar lug (worn breaks) with iron staining around it. All the edges of the headplate are worn. The bow is D-shaped in cross-section, quite highly arched and simple, with a groove across the top the onl…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D0BB0C
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Head and bow from an early Anglo-Saxon copper-alloy small-long brooch. The flat headplate is very worn and its original shape is uncertain, but it has the remains of deep U-shaped cut-outs in both its lower edge and its upper corners, forming three knobs. These may have had straight ends, as the top and one side knob each retain a straight row of crescentic stamps along their edges. On the reverse of the headplate is a large double pin bar lug, one lug incomplete and the other retaining part of an iron pin bar. There is extensive iron corrosion between the two lugs.  The bow…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D07466
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Complete early Anglo-Saxon copper-alloy small-long brooch, now in two joining parts. The head is of the 'cross potent' type, with a flat rectangular central panel c. 13 x 18mm. This has three sub-rectangular flat 'knobs' attached by narrower waists, to form a headplate in total 32.2mm wide. The surface is corroded and some is missing, but traces of double-crescent or half ring-and-dot stamps can be seen; there is a row of five on the top knob and a similar row on one side knob, each with a trace of a single groove outside the row of stamps. On the reverse of the headpla…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-D012DB
Object type: GIRDLE HANGER
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Fragment of early Anglo-Saxon copper-alloy girdle-hanger. Using Felder's terminology (2014, 35, fig. 3.1), the fragment consists of the suspension loop, shank neck and part of shank, with a granular, unworn break. The suspension loop is a narrow, rounded lobe at the top, pierced from side to side, but the perforation is now blocked with iron corrosion. The shank neck is a D-section area below the suspension loop, divided into five rounded lobes; its junction with the shank is marked with a transverse ridge. The shank itself is rectangular-section and flares very slightly …
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CF59E4
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Chunky copper-alloy bar from an early Anglo-Saxon wrist-clasp, apparently of Hines Form B10 or possibly alternatively B4. The bar is cast in one piece, with three cuboidal elements, one in the centre and one at either end. These are linked by D-section areas, each one decorated with two broad U-section transverse grooves or flutes, alternating with three ridges each flanked by narrow grooves. Each of the cuboidal bosses has a substantial white-metal coating, probably of tin. On the flat reverse there are two broken pierced lugs, set transversely and pierced longitudinally. Length 40.3…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: NMS-CE5E22
Object type: SLEEVE CLASP
Broad period: EARLY MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation
Early Anglo-Saxon copper-alloy wrist-clasp of Hines's Form B20, in very good condition. It is largely flat, and cast in one piece, with a raised, flat-topped bar, a plate with shaped rear edge, and a complete loop. The bar is c. 6mm wide and has two zones of transverse groove decoration, not perfectly evenly spaced along its length; both consist of a wider U-section groove flanked by two similar slightly narrower grooves. The rear edge of the bar has a longitudinal step intermediate in height between the bar and the rest of the plate. The rear edge of the plate is flatte…
Created on: Monday 15th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded.

Record ID: SUR-800F04
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation
A silver early Medieval early penny (sceat), Series H (secondary) Type 49: Metcalf 1, Wodan / Peacock, dating to AD 720-745. Obverse: round moustached Woden face centrally with beaded outline surrounded by ten bosses comprising pellets in annulets. Reverse: Crested peacock displaying right with linear body, splayed feet and pellet within ring of pellets below neck. Hamwic (Southampton) Mint. See Abrahamson (2017): p. 185. 
Created on: Thursday 11th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

Record ID: OXON-7EB1DD
Object type: COIN
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
An incomplete silver Sceatta, Series E, type E800 sub-variety k dating to the period c.AD720-40. The obverse has a quilled crescent coiled right with annulet and saltire. The reverse depcits a beaded standard with central annulet and angular symbols spelling TOTI. As Abramson (2006: 91). 
Created on: Thursday 11th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Stanton St. John', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6BB731
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment from an Early Medieval (Anglo-Saxon) copper-alloy annular brooch, dating to the late fifth or sixth century.  The frame is flat, circular, and un-decorated. It terminates in a restriction for the pin (which is missing).  Length: 24.25mm Thickness: 3.77mm Weight: 4.76g
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'Great Finborough', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-6B9CC9
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy disc of Medieval date 8th-9th century. All that remains is a quarter of the disc, which has cruciform arms and a chip-carved counter-relief interlace is net-like and occasionally expands to form small triangles. The interlace is abstract, with no animal elements identifiable, but there is evidence of gilding. The reverse is undecorated and has corrosion. The catchplate and pin are missing. Similar examples can be seen in PAS see NARC-E11208.  Length: 20.58mm Width: 16.85mm Weight: 0.91g
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-69468E
Object type: HOOKED TAG
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
An incomplete lead hooked tag of Early Medieval date. It consists of a circular boss with two pierced attachment loops, the hook is missing, with iron corrosion present around a circular hole in the disc. Decoration comprises a prominent boss in the centre of three sets of double-line in counter-relief. Hooked tags manufactured from lead are very uncommon, and it is possible it is a mould rather than a finished tag. Similar examples can be found on PAS (see NMS-412B7B). Diameter: 16.19mm Length: 21.07mm Thickness: 2.46mm Weight: 4.27g
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: LEIC-69336F
Object type: STIRRUP
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
An Early Medieval copper-alloy stirrup mount, dating to c.AD 1000 - 1100. Williams (1997) Class A,Type 9. The stirrup is sub-trapezoidal in plan and rectangular in section. The upper edge exhibits a projecting lobe with a central rivet hole for attachment. Below is an anthropomorphic facing mask with recessed eyes of differing shapes, a central moulded trapezoidal nose and two transverse mouldings indicating the mouth. Engraved lines above the eye sockets and to either side of the nose are presumably intended to indicate the brow line and facial hair. Projecting backwards from the bott…
Created on: Wednesday 10th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded.

• 

  Image not taken

Record ID: SF-68D845
Object type: GAMING PIECE
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A lead complete possible Viking gaming piece. It is oval in cross-section, with a copper-alloy rod in the centre, it has a flat, mis-shapen base. It tapers towards its upper terminal end. A similar, solid, possible gaming piece has been found at Long Melford, Suffolk see SF-C01997, Little Wilbraham, Cambridgehsire see SF-50B784, and two hollow very simliar examples have also been found at Little Wilbraham, Cambridgeshire, see SF-6F5256 and SF-6F7361. An alternative function of these objects would have been as weights rather than gaming pieces. Height: 18.94mm …
Created on: Wednesday 10th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'Debenham', grid reference and parish protected.

Record ID: OXON-55DFC9
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation
A copper alloy pin dating to the Early Medieval period, (400-1066). The head of the pin is globular. The shaft is circular in cross-section and terminates with an ancient break. The head of the pin is decorated with two incised grooves crossing one another to form an X pattern. The pin has a medium green patina. The pin is 7.2mm in diameter at the head which is 7mm tall, the shaft is 2.3mm in diameter and the pin overall is 30.2mm long. it weighs 2.20 grams. Similar examples on the database include include SUR-ADFE30, LIN-1E770B and BUC-D4334E. It is most likely Early …
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Stanton St. John', grid reference and parish protected.

• 

  Image not taken

Record ID: SF-559DC7
Object type: STRAP END
Broad period: EARLY MEDIEVAL
County: Suffolk
Workflow stage: Awaiting validation
A fragment of a copper-alloy Early Medieval (Anglo-Saxon) strap end of Thomas Class E, Type 1 dating to the period c. AD 1000 - 1100. It would have comprised of an open-work design, but all that remains is the attachment end. The attachment plate retains three entrally positioned rivet holes. The openwork tongue terminates in an old break and has two semi-circular holes. A more complete example can be found on PAS see SOM-F33A5F. Cf. Thomas, G, 2004, p. 3, no. 24. A similar example is illustrated in (Griffiths et al 2007; 64 no 334) where it was noted the design o…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Combs', grid reference and parish protected.