Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014818522101B6E
    • Page: 42

  • Thumbnail image of YORYM-C4EABB

Record ID: YORYM-C4EABB
Object type: WEIGHT
Broad period: MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A complete lead-alloy weight of probable medieval to Post-Medieval date, c.AD 1100 - 1800. The weight is sub-lozenge in plan with rounded corners, and D-shaped in section. The design of a cross is moulded into the upper surface with each of the four arms extending from a central raised circular knop and extending to the corners. Any further possible decoration is obscured by wear. The base is flat and undecorated though with a slight indentation at the centre. The metal has a mid-white/grey patina and is worn. The object is 51.3mm long, 45.9mm wide, 23.8mm thick and weighs 234g.
Created on: Wednesday 17th May 2017
Last updated: Thursday 25th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C4CB25

Record ID: FAKL-C4CB25
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman plate brooch, c. AD100-200, Cast copper alloy with some traces of red enamel. Disc shaped with concentric decoration consisting of a central setting within a boss. This is surrounded by a circumferencial groove which in turn is set within a band containing a row of pellets. On the edge of the plate are two D shaped projections containing ring and dot decoration. Beneath these are the pin fittings. The brooch has a thin section which has been broken through in the area of the groove. Length 37.5mm, Width 29.8mm, Thickness 3.0mm, Mass 7.57g.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Image not taken

Record ID: NMS-C4C628
Object type: HARNESS HOOK
Broad period: MEDIEVAL
County: Norfolk
Workflow stage: Awaiting validation Find awaiting validation
Incomplete medieval tinned hooked harness mount, broken and corroded, rectangular-sectioned bar (7 x 5mm), broken tapering hook, two rivet-holes, both with copper alloy rivet, other end with worn break across further perforation. Extant length 44mm. 13th-14th century.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C49EFE

Record ID: FAKL-C49EFE
Object type: BROOCH
Broad period: ROMAN
County: Doncaster
Workflow stage: Published Find published
Roman brooch of Headstud type, AD100-200. trapezoid sectioned bow with a groove down its length, cylindrical terminal with a circumferential triple moulding and a recessed face containing a central boss. . Oval headstud also containing a central boss. Below this is a rectangular lug. Wings marked by transverse grooves, through them runs a longitudinal bar that secured the hinged pin (missing). The brooch has undergone some recent damage. Length 40.0mm, Width 20.4mm, Height 18.3mm, Mass 11.09g.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of YORYM-C48F52

Record ID: YORYM-C48F52
Object type: TOGGLE
Broad period: IRON AGE
County: East Riding of Yorkshire
Workflow stage: Awaiting validation Find awaiting validation
A probable incomplete copper-alloy toggle or strap fitting of late Iron Age to Roman date, c. 50 BC - AD 150. The object has a trefoil head formed of three conjoined circular cells with raised edges and central circular recesses. One recess is solid, a second is perforated and the third retains a separately cast spike. The cell with the solid recess has an integral transverse shank to the reverse. A bulbous swelling is present where the cell and shank meet from which fluted arms project to either side. The terminals of each arm are incomplete and worn though appear to have deep circula…
Created on: Wednesday 17th May 2017
Last updated: Thursday 18th May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C485DD

Record ID: PUBLIC-C485DD
Object type: SPINDLE WHORL
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A medieval lead spindle whorl, circular in shape and domed with a flat base. A central perforation runs through the object, around 11mm in diameter. There is no decoration.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C433CC

Record ID: PUBLIC-C433CC
Object type: UNIDENTIFIED OBJECT
Broad period: UNKNOWN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An unknown object of unknown date. The object is spherical with many perforations in the centre. Possibly used as a sieve or as a sprinkler. There is a small remainder of a rivet in the piece.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C41BF7

Record ID: PUBLIC-C41BF7
Object type: KEY (LOCKING)
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval copper alloy key. The key has a broken handle, the remaning loop is "U" shaped. There is a small bulge at the neck with a vertical line across the top and bottom of the bulge. The end of the body is hollow with a slight loss. The bit is rectangular with a groove in the centre of the right side and a small vertical section in the centre of another materical (possibly iron).
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of KENT-C3F594

Record ID: KENT-C3F594
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast lead spindle whorl of uncertain date possibly later Early-Medieval / early High Medieval as it roughly fits Walton Rogers type A2. Description: The spindle whorl has one wide end which is slightly concave and a flat thinner other end and curved sides creating a beehive shape. the central perforation is 13.42mm in diameter. the whorl is patinated an off white. Measurements: 29.61mm in diameter (at widest point) 15.11mm thick and 49.25g in weight. Discussion: Penelope Walton Rogers, has classified spindle whorls from Early-Medieval Flixborough, this example almost fits her clas…
Created on: Wednesday 17th May 2017
Last updated: Tuesday 23rd May 2017
Spatial data recorded. This findspot is known as 'Goodnestone', grid reference and parish protected.


  • Thumbnail image of PUBLIC-C3E698

Record ID: PUBLIC-C3E698
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval copper alloy buckle plate. The plate is rectangular, made from one sheet of metal folded over. There are two loops, two perforations and a large bulge in the centre of the sheet.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of BUC-C3DE47

Record ID: BUC-C3DE47
Object type: COIN
Broad period: MEDIEVAL
County: Buckinghamshire
Workflow stage: Awaiting validation Find awaiting validation
A silver medieval half groat of Edward IV's first reign, AD 1461-1470. Light coinage, 1464/6- 1470. Pall initial mark. Mint of Canterbury. North Volume II, page 88, number 1590.
Created on: Wednesday 17th May 2017
Last updated: Thursday 18th May 2017
Spatial data recorded.


  • Thumbnail image of CORN-C3D550

Record ID: CORN-C3D550
Object type: BRIDLE BIT
Broad period: EARLY MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Incomplete cast copper alloy bridle bit link, dating from the Early Medieval period, c.1000-1100. The complete trefoil terminal is lozenge-shaped in plan with three external knops that are vary from 2-3 mm in width, and an internal ovate aperture that is 8 mm long and 6 mm wide. The remains of the connecting bar is 8 mm in length, D-shaped in section and terminates in a tapered and rounded end, suggesting that after the terminal was broken off of the rest of the bit link, the broken end may have had some secondary use. The underside of the bar is flat. The original narrow bar may not h…
Created on: Wednesday 17th May 2017
Last updated: Sunday 21st May 2017
Spatial data recorded.


  • Thumbnail image of KENT-C3D384

Record ID: KENT-C3D384
Object type: SPINDLE WHORL
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A cast lead spindle whorl of uncertain date possibly later Early-Medieval / early High Medieval as it fits Walton Rogers type A2. Description: The spindle whorl has one flat wide end and a flat thinner other end and curved sides creating a beehive shape. the central perforation is 13.42mm in diameter. the whorl is patinated an off white. Measurements: 31.22mm in diameter (at widest point) 19.10mm thick and 99.85g in weight. Discussion: Penelope Walton Rogers, has classified spindle whorls from Early-Medieval Flixborough, this example would fit her class A2, dating to the late Saxon …
Created on: Wednesday 17th May 2017
Last updated: Tuesday 23rd May 2017
Spatial data recorded. This findspot is known as 'Goodnestone', grid reference and parish protected.


  • Thumbnail image of FAKL-C3CFA2

Record ID: FAKL-C3CFA2
Object type: COIN
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Published Find published
Post Medieval silver coin, Obverse blank, Reverse bears traces of the Tudor Royal Arms, AD1485-1603). It is not possible to determine the denomenation of this coin. Diameter 16.1mm, Mass 0.67g.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C3B906

Record ID: PUBLIC-C3B906
Object type: MOUNT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A Medieval copper alloy mount with Zoomorphic gilding. The mount is rectangular with a beast (perhaps a wolf or dog) facing left and four vertical lines across the centre of the body. Some of the gilding around the edges has been removed. There is a small bulge in the centre of the reverse.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of CORN-C3B832

Record ID: CORN-C3B832
Object type: BEAD
Broad period: POST MEDIEVAL
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Mid blue wound small disc bead, circular in plan and slightly biconical in profile. The bead is regularly formed with very even and parallel turned lines on the exterior indicating a mass produced item. There is also no 'tail' at the end of the turned glass on the edge of the perforation on one side and there is no sign of any spiraling into the hole. The perforation is a perfect circle in plan and cylinder in profile. There are indications of wear in a circular pattern on both sides around the central aperture, suggesting this was part of a necklace, but other than that there is no we…
Created on: Wednesday 17th May 2017
Last updated: Monday 22nd May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C39B66

Record ID: PUBLIC-C39B66
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
An Post Medieval copper alloy Dress Hook. The dress hook is a circular body with a sub-triangular suspension loop and misshapen lower hook. The front face of the object is decorated with moulded relief and depicts a classical-style female bust left. The whole object is bent and misshapen.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


  • Thumbnail image of CORN-C383D7

Record ID: CORN-C383D7
Object type: COIN
Broad period: ROMAN
County: Cornwall
Workflow stage: Awaiting validation Find awaiting validation
Cast copper alloy sestertius of Hadrian (AD 117-138), Reece period 6, PONT MAX TR POT COS II S / C // FORT RED reverse type depicting Fortuna, draped, seated left holding rudder on ground in right hand and cornucopiae in left. Cf. BMC III, p.404, pl.77, fig.1, no.1135 which is COS II (c.AD 118)
Created on: Wednesday 17th May 2017
Last updated: Thursday 18th May 2017
Spatial data recorded.


  • Thumbnail image of FAKL-C37F4D

Record ID: FAKL-C37F4D
Object type: COIN
Broad period: POST MEDIEVAL
County: Doncaster
Workflow stage: Published Find published
Post Medieval coin, halfgroat of Charles I (AD1625-1649) North 2250. Obverse: Crowned bust left with II behind head; CAROLVS DG [ ]. Reverse: Royal Arms, C - R to sides, IVSTITIA [thronvm fir] MAT. Diameter 15.0mm, Mass 0.84g
Created on: Wednesday 17th May 2017
Last updated: Wednesday 17th May 2017
Spatial data recorded.


  • Thumbnail image of PUBLIC-C3797A

Record ID: PUBLIC-C3797A
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
A Post Medieval copper alloy buckle. The buckle is square shaped with a triangular outer edge. The bar is thinner than the other three sides with a circular knop on both sides of the bar.
Created on: Wednesday 17th May 2017
Last updated: Wednesday 24th May 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 735,647
Search server index: asgard

You are viewing records: 821 - 840.

Search statistics

  • Total quantity: 1,129,578
  • Mean quantity: 1.535
  • Maximum: 52,504

Filter your search

821 - 840 of 735,647 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.