Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014818522101B6E
    • Institution: NLM

  • Thumbnail image of NLM-A436CC

Record ID: NLM-A436CC
Object type: KNIFE
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Grey flint knife. A trapezoid flake with broad and narrow flakes struck from its dorsal side, and with a bulb and ripples on its ventral surface. One end may then have received short abrupt retouch executed from the dorsal aspect along a curved end. A misty patina then formed over all surfaces, suggesting the object was discarded and endured a period of exposure to a calcareous environment. The patina was subsequently removed along one straight edge by short abrupt retouch executed from the dorsal aspect. This represents a flake reused after its initial deposition; the Neolithic period…
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-A2591B

Record ID: NLM-A2591B
Object type: HAMMERSTONE
Broad period: NEOLITHIC
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Coarse-grained pink quartzite [non-specialist identification by MF] possible hammer stone, as kindly suggested by the finder. An oval pebble with flat sides, possibly formed and smoothed by rolling in water or by Aeolian 'desert glossing', with one flat and three battered zones around its edge, the latter revealing crystalline structures. The object appears attractive and may well have been selected, perhaps from glacial drift, for its fleshy colour. The localised abrasion could have arisen from relatively light hard hammer working, a technique especially characteristic of the Neolithi…
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded. This findspot is known as 'Swinhope', grid reference and parish protected.


  • Thumbnail image of NLM-A24F13

Record ID: NLM-A24F13
Object type: FINGER RING
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver finger ring fragment. Cast 'TOT' ring, comprising a round flat bezel which stands proud of a remaining sub-triangular shoulder with engrailed edges, and with a short [12mm] length of a narrower band projecting beyond it. Possibly of Henig type VIII [8].A pair of lines are incised along the shoulder and a stamped or drilled pit is set outside these lines to either side. The unseriffed letters T T are incised on the bezel, both being c.5mm high, with a pit of diameter c.2mm between them; together this should be read as TOT, a contraction of the name Toutatis. Finger rings bearing…
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-A23FE8

Record ID: NLM-A23FE8
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Lead weight. Cast discoid weight, flattened on part of its edge, whether deliberately is uncertain. The letter W or M, in a rectangular panel and preceded or followed by a thick bar, in apparently recent style made up of crisp overlapping Vs, has been stamped thrice upon one flat side; patinated. Weights of this value do not appear amongst those reported from the London waterfront (Egan 1998, table 15, fig. 229). The apparent modernity of the stamped lettering is also at odds with the simple form and patinated surface of the weight. Suggested date: possibly Post-Medieval, 1500-1800. D…
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded. This findspot is known as 'Binbrook', grid reference and parish protected.


  • Thumbnail image of NLM-A22F6A

Record ID: NLM-A22F6A
Object type: JETTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy jetton. A probably milled Nurembureg jetton, of larger module, heavier and also on a much thicker flan [1.8mm] than is usual. Suggested date: Post-Medieval, 1584-1636. Obverse description: Smoothed by wear. Reverse description: Reichsapfel Diameter: 25.7mm, Weight: 8.26gms
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-A220DE

Record ID: NLM-A220DE
Object type: BUTTON
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy button. Plain flat discoid button with a cast loop set into a central boss on the back. Suggested date: Post-Medieval, 1850-1900. Diameter: 17.9mm, Thickness (clear of loop): 1.21mm, Weight: 2.52gms
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-A2067B

Record ID: NLM-A2067B
Object type: COIN
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy probable coin. Probably a worn Georgian halfpenny, post-medieval issue of 1719-1807, retaining no detail on either side. Diameter: 27.4mm, Weight: 6.26gms
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-A1FBFE

Record ID: NLM-A1FBFE
Object type: CUFF LINK
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy possible cuff link fragment. Concavo-convex plain discoid front from a link or button of composite construction; the grey tint may suggest the presence of tin in the metal mix. Suggested date: Post-Medieval, 1700-1850. Diameter: 16.5mm, Thickness: 0.8mm, Weight: 1.24gms
Created on: Tuesday 25th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-9058DE

Record ID: NLM-9058DE
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin. Nummus of the House of Constantine, Gloria Exercitus issue of 335-341, possibly Trier mint, Reece period 17. Obverse description: Youthful bust cuirassed right Reverse description: two soldiers with one standard between them; the standard has a rectangular vexillum and the soldier on the right appears to raise his hand to hold it. Reverse inscription: [GLORI] A EXERC [ITVS In exergue: [?]RP.. Diameter: 14.8mm, Weight: 0.98gms, die axis: 6
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-904F3B

Record ID: NLM-904F3B
Object type: DOOR FITTING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy probable door fitting. Cast concavo-convex discoid plate with a central rounded boss with spirally incised radiating lines, and with two slightly sunken fields stepped towards an outer pelleted frame. A cabled motif separates the inner and outer orders. A collared round lug with traces of iron staining appears to have serveds as a single fixing point, which would permit the object to have rotated to reveal or conceal a keyhole if mounted as an escutcheon. Suggested date: Post-Medieval, 1750-1850. Height: 53.1mm, Diameter: 40.3mm, Thickness: 2.3mm, Weight: 18.89gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-903D46

Record ID: NLM-903D46
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy buckle. Cast sub-rectangular buckle frame of rounded section with a strap bar set back from the rest of the frame, and with a curved outer edge with a nick serving as pin rest. Rust adhering to the strap bar may suggest the frame was deposited with an iron pin attached [now lost]. The robust construction may suggest this to have fastened a lighter element of horse harness. Suggested date: Post-Medieval, 1800-1900. Length: 29.7mm, Height: 25.1mm, Thickness: 3.8mm, Weight: 8.52gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-903019

Record ID: NLM-903019
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy furniture fitting. A cast handle comprising a curved and bordered strip with projecting triangular lugs at its inner ends, both pointing slightly upwards, and with a simple openwork knot motif at its midpoint. Probably a handle from a light drawer. Lightly bent. Suggested date: Post-Medieval, 1750-1850 Width: 43.5mm, Height: 29.2mm, Thickness: 1.8mm, Weight: 4.43gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-90268D

Record ID: NLM-90268D
Object type: MOUNT
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy, iron and ceramic mount. Cast or die stamped star of eight points [one lost] surmounted by a circular vertically walled cell retaining an ivory-white convex polished ceramic boss of diameter 19mm, now cracked. The corroded broken stub of an iron fixing of diameter 8.5mm appears on the back of the star and behind the boss. Possibly from a decorated item of furniture or saddlery. Suggested date: Post-Medieval, 1800-1900. Diameter: 32.2mm, Thickness (overall): 9.4mm, Weight: 12.46gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-9017C7

Record ID: NLM-9017C7
Object type: LACE TAG
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy lace end. A substantially made tube of copper alloy of thickness 1.5mm with a butted seam and a rivet of diameter 1.5mm and length 6mm, burred on the display face, passing through its wider end, presumably attaching this object to a substantial lace. Two sets of three horizontal nicks and one group of two are set along the display side. The object is indented at its narrower end, possibly for a secondary or occasional use as a nail cleaner, and is worn overall, presumably from prolonged use, with traces of diagonal filing towards its narrower end. Now lightly squashed to a…
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-900D1D

Record ID: NLM-900D1D
Object type: HARNESS PENDANT
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy harness pendant. Cast heart-shaped plate with its cleft occupied by the springing of an oval loop at right angles to its display plane, and with incised nicks angled towards each other to either side. The base of the 'heart' becomes a short phallic member with a slightly elongated discoid glans. Probably from the decorative horse trappings of an auxillary cavalryman. The loop is now broken. Suggested date: Early Roman, 43-200. Length: 46mm, Width: 17.8mm, Thickness (clear of loop, maximum at glans): 4.4mm, Weight: 7.94gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-8FED74

Record ID: NLM-8FED74
Object type: BROOCH
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy brooch fragment. Cast headstud brooch, probably Mackreth type Headstud 5.a. Cast rectangular wings with two deep vertical grooves apiece conceal a tubular case for the axis bar of a hinged pin [lost]. There is a trace of an integrally moulded top loop on top of the head, mostly lost. A round stud with a central boss is set at the crest of a rectangular section bow which is hollowed behind. The rest of the brooch below the stud is lost/. Suggested date: Early Roman, 70-160. Length: 15.7mm, Width: 17.5mm, Thickness (crest of bow above stud): 4.1mm, Weight: 4.77gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-8FE056

Record ID: NLM-8FE056
Object type: FINGER RING
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy finger ring. Cast rectangular section band with its display side subdivided into about eight rectangular cells, all bearing probably stamped straight and curvilinear motifs. The arrangement superficially resembles lettering, which it probably is not. Squashed. Suggested date: Post-Medieval, 1700-1800. Length (as found): 26.4mm, Band Width: 4.8mm, Band Thickness: 0.9mm, Weight: 2.23gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-8FD07F

Record ID: NLM-8FD07F
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Silver coin. Probably a clipped penny of a later medieval ruler, probably issue of 1470-1485. Obverse description: Bare-shouldered bust with open bifoliate crown whose ornaments appear to touch. Obverse inscription: [---]?A REX[---] Reverse description: Long cross, three pellets in each angle. Reverse inscription: CIVI/TAS/[----] Diameter: 15.9mm, Weight: 0.76gms, die axis: 3
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-8FC69D

Record ID: NLM-8FC69D
Object type: BUCKLE
Broad period: POST MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy and iron buckle. Cast rectangular copper alloy frame with probably stamped floral decoration overall, retaining a separate steel spindle-mounted pin and chape, now corroded. Suggested date: Post-Medieval, 1720-1790. Length: 21.3mm, Height: 17.7mm, Thickness (overall): 3.9mm, Weight: 2.43gms
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


  • Thumbnail image of NLM-8FAB9F

Record ID: NLM-8FAB9F
Object type: COIN
Broad period: ROMAN
County: North Lincolnshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin. Nummus, probably of Constantine I (306-337), Sarmatia Devicta issue of 322-325, Trier mint, Reece period 16, possibly RIC vol. 7 no. 429, issue of 323-324. Obverse description: Bull-necked head laureate draped and/or cuirassed right. Obverse inscription: CONSTAN TINVS AVG Reverse description: Victory advancing right holding trophy and palm, pushing kneeling captive right Reverse inscription: SARMATIA DEVICTA In exergue: probably PTR Diameter: 17.9mm, Weight: 2.13gms, die axis: 6
Created on: Monday 24th September 2018
Last updated: Tuesday 25th September 2018
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 38,620
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 43,312
  • Mean quantity: 1.121
  • Maximum: 133

Filter your search

1 - 20 of 38,620 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.