Database search results

Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014818522101B6E
    • County: Oxfordshire

  • Thumbnail image of BERK-125807

Record ID: BERK-125807
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy open plate, possibly a buckle or other fitting / fastening plate of probable late early-medieval date. The plate is flat in profile and the remaining section is sub-square in plan. The openwork elements consist of four triangles and one oblong while the broken section also appears to have had triangular apertures. The edge of the frame is slightly curved, and a projecting knop is extant on one corner. All of the openwork elements have sets of two or three crudely incised lines as decoration, located at the edges / corners of the apertures. The decoration…
Created on: Wednesday 13th December 2017
Last updated: Wednesday 13th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-A949BD

Record ID: BERK-A949BD
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete silver Roman denarius of Domitian, dating to the period AD 92-93. Reece Period 4. IMP XXII COS XVI CENS P P P Minerva advancing right with spear and shield reverse type, mint of Rome. RIC 739; RSC 280; Sear 1988 no. 897.
Created on: Friday 8th December 2017
Last updated: Wednesday 13th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-A900D5

Record ID: BERK-A900D5
Object type: FINGER RING
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy finger ring of Roman date (c. AD 100-300). The finger ring is stirrup-shaped in plan with the internal width being grater than the internal height. The lower hoop is flat and plain while the upper half of each side of the hoop below the bezel expands into two trapezoidal shoulders, both of which are decorated with a a double row of slanted incised lines either side of a central vertical line. The shoulders are constricted at the top either side of the bezel, which is lozenge-shaped in plan. Within the bezel are six short and circulr bosses of copper alloy a…
Created on: Friday 8th December 2017
Last updated: Friday 8th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-93F6CC

Record ID: BERK-93F6CC
Object type: BROOCH
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy brooch of Middle Iron Age date, c. 400-200 BC. The brooch has a high arched (humped) bow in the centre of two sets of horizontal arms all of which are sub-triangular in plan and terminate in rounded knops. At the head of the brooch and the foot are vertical projections also of sub-triangular form with rounded knop terminals, althought the foot knop is broken and missing. On the reverse of the brooch, located on the cross bar of the arms, is the catchplate at the foot and a double lug for the pin at the head. The pin is missing. This brooch is diffic…
Created on: Thursday 7th December 2017
Last updated: Friday 8th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-689831

Record ID: BERK-689831
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper alloy Polden Hill type brooch, silvered with spring and pin missing. Dating to the period AD 75 - 175
Created on: Tuesday 5th December 2017
Last updated: Wednesday 13th December 2017
Spatial data recorded.


  • Thumbnail image of WAW-4718C8

Record ID: WAW-4718C8
Object type: BROOCH
Broad period: IRON AGE
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Late Iron Age to early Roman (c. AD 25 to c. 60) Colchester One-Piece brooch: The copper alloy has wings which are formed by a horizontal rectangular bar. On the reverse of the wings, integral to the upper edge is a rectangular protrusion which is folded back on itself forming a loop. The lower edge of the wings, on the reverse, there is an incomplete integral spring. The bow is hump-like in profile, but is slender and tapers down the bow to a sharp terminal. The bow is sub-oval in section and undecorated. The reverse of the lower portion of the bow has traces of a catchplate. In profi…
Created on: Sunday 3rd December 2017
Last updated: Wednesday 13th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-EA3E84

Record ID: BERK-EA3E84
Object type: FLUE TILE
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman ceramic relief-patterned box flue tile dating from AD 50-400. The front is decorated with a relief-patterned rolled design in the chevron style. Betts writes that flue tilese were "keyed with wooden rollers [...] when the clay was still damp, before they were put into the kiln to fire. This was added so the tiles could be more firmly mortared into place." The fabric is fully oxidised throughout and has infrequent inclusions of iron and rare small grit / stone. McComish (2015:12) writes "Box flues (tubuli) are hollow rectangular or square cross-sectioned tiles…
Created on: Wednesday 29th November 2017
Last updated: Wednesday 13th December 2017
Spatial data recorded.


  • Thumbnail image of BERK-D8D309

Record ID: BERK-D8D309
Object type: BOOK FITTING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete copper alloy book fitting of late medieval to post-medieval date c. AD 1400-1600. The book fitting is rectangular in plan, with a narrowed hooked terminal at one end and a falerd terminal at the other. The two arms of the flared section have rivets through which helps secure the front plate to the back plate. A third rivet hole is located centrally along the length of the front plate with an incised circular around it as decoration. The back plate is shorter, rectangular in plan and is plain and undecorated and extends past the terminal of the front plate - it is also a …
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of BERK-D89CA3

Record ID: BERK-D89CA3
Object type: STRAP FITTING
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete cast copper alloy strap fitting or belt mount dating to the medieval period (13th to 15th Centuries). The mount is of the bar type and consists of a domed central oval, with two projecting lugs. The projecting lugs are rectangular in shape, with a central perforation and retain the securing copper alloy rivets. The head of the rivet is flush with the front of the mount, but extends past the back of the mount. The central oval is domed with multiple horizontal and vertical grooves as decoration in the middle. The reverse is concave but is plain and undecorated. This sty…
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of BERK-D86C23

Record ID: BERK-D86C23
Object type: BUCKLE
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A complete leaded bronze double looped buckle of Medieval to Post-Medieval date (c. AD 1350 - 1650). The double looped frame is plain and undecorated. It is slightly rounded on the front but flat on the rear. There is no pin.
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of BERK-D85790

Record ID: BERK-D85790
Object type: JETTON
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A worn copper alloy post-medieval rose / orb type Nuremberg jetton issued by Hans Krauwinckel II, and dating to the period AD 1586 and 1635. Mitchiner Nos. 1518-1533.
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Image not taken

Record ID: BERK-D7AE79
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy Radiate dating to the period AD260 - 290, mainly illegible and no photograph.
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of BERK-D75B72

Record ID: BERK-D75B72
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy nummus (AE1/2) of Constantine I (AD 307 - 337) dating to the period AD 310 -313. Reece Period 15. SOLI INVICTO COMITI reverse type, mint of Trier.
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of BERK-D71CAB

Record ID: BERK-D71CAB
Object type: CASTING WASTE
Broad period: BRONZE AGE
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An undated copper alloy object, a fragment of casting debris (a casting jet) from metal working. The object is cone-shaped with a deep well in the centre and a thick stubby runner beneath, which would have flowed into the mould. The runner has several incised lines around it that may be tooling marks from when the jet was detatched from the mould, or may indeed be evidence of the tool working on the mould itself. The casting jet has a light green patina with much blackened material across and around it. Although it is not possible to identify the period with certainty, the patina s…
Created on: Tuesday 28th November 2017
Last updated: Tuesday 28th November 2017
Spatial data recorded.


  • Thumbnail image of NLM-BFB0EC

Record ID: NLM-BFB0EC
Object type: NUT CRACKERS
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy nut cracker fragment. Cast arm from a pair of nut crackers with a D-section jaw with lateral grooves on its flat side to afford grip, and with four moulded ribs and further incised lines on the back, with a gently tapered handle which progresses from D-section at the jaw to round section at its end, where the tip is lost. An integrally cast hook at the top of the jaw would have engaged with its counterpart on the other arm [lost]. Suggested date: Post-Medieval, 1600-1700. Length: 91.3mm, Width: 8.9mm, Thickness: 4.4mm, Weight: 18.00gms
Created on: Monday 27th November 2017
Last updated: Monday 27th November 2017
Spatial data recorded. This findspot is known as 'Culham', grid reference and parish protected.


  • Thumbnail image of NLM-BF931E

Record ID: NLM-BF931E
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Copper alloy coin. Nummus of Crispus (317-326), Providentiae Caess issue of London mint 324-325, Reece period 16, as kindly identified by the finder, citing Sear vol. 4 no. 16791 and RIC vol. 7 no. 295. Obverse description: Youthful bust laureate draped and cuirassed right. Obverse inscription: [F]L IVL CRISP[VS NO]B CAES Reverse description: Camp gate with two towers and star between them, six courses of masonry. Reversde inscription: PROVIDEN TIAE CAESS In exergue: PLON Diameter: 20.6mm, Weight: 3.21gms, die axis: 6
Created on: Monday 27th November 2017
Last updated: Monday 27th November 2017
Spatial data recorded. This findspot is known as 'Culham', grid reference and parish protected.


  • Image not taken

Record ID: WAW-BF3D95
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: A copper-alloy nummus of the House of Constantine dating to the period AD 335 to 341 (Reece Period 17). GLORIA EXERCITVS depicting two soldiers holding one standard. Mint unclear.
Created on: Monday 27th November 2017
Last updated: Monday 27th November 2017
Spatial data recorded.


  • Thumbnail image of WAW-BE2143

Record ID: WAW-BE2143
Object type: COIN
Broad period: MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Medieval coin: silver penny of Edward I (1272-1307) minted in London between 1299 and 1301. Class 9a. North No. 1036/1.
Created on: Monday 27th November 2017
Last updated: Monday 27th November 2017
Spatial data recorded.


  • Thumbnail image of WAW-748F60

Record ID: WAW-748F60
Object type: COIN
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Roman coin: A copper-alloy nummus of the House of Constantine dating to the period AD 324 to 330 (Reece Period 16). PROVIDENTIAE AVGG or PROVIDENTIAE CAESS depicting camp gates. Minted in an unknown mint.
Created on: Thursday 23rd November 2017
Last updated: Friday 24th November 2017
Spatial data recorded.


  • Thumbnail image of WAW-7484E5

Record ID: WAW-7484E5
Object type: JETTON
Broad period: POST MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
Post Medieval jetton: Rose and orb jetton of Hans Krauwinckel II and dates from 1586 and 1635. Mitchiner Nos. 1518-1533. Obverse: Illegible legend. Three Crowns, alternately with three lis, arranged centrifrugally around a central rose. Reverse: Illegible legend. Imperial orb surmounted by a cross patty, within a tressure with three main arches. Mitchiner, M. 1988 Jettons, Medalets and Tokens: The Medieval Period and Nuremberg Seaby, p. 439 and 440.
Created on: Thursday 23rd November 2017
Last updated: Friday 24th November 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 18,913
Search server index: objects

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 29,052
  • Mean quantity: 1.536
  • Maximum: 4,957

Filter your search

1 - 20 of 18,913 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.