Record ID: NLM-552405
Object type: ROOF TILE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Ceramic building material. Buff reduced fabric with occasional calcareous inclusions [rock] to length 4mm. Handmade roof tile fragment with one straight edge, and with the imprints of a sanded surface on its underside where the green or unfired tile was laid, and either glaze or vitrification traces on the smoothed upper surface. The glaze might suggest this to be part of a ridge tile or roof furniture, which were often glazed; the object is thinner than a plain ceramic roof tile. Suggested date: Medieval, 1200-1400 Width: 38mm, Thickness: 12.1mm, Weight: 26.29gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-550A69
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy vessel fragment. A shard probably from the everted rim of a cast vessel with incised lines at the top and bottom of its putative rim. These lines may be formed by the lathe finishing of a vessel. Suggested date: Post-Medieval, 1500-1700 Height: 15.9mm, Width: 20.2mm, Thickness: 2.0mm, Weight: 3.25gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-54EB01
Object type: BELL
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy bell. Cast rumbler bell, of spherical form and one-piece construction, formed by the inward folding and closing of four sub-triangular leaves and with a small oval integral top loop, now broken across a small drilled hole. Traces of gilding appear. Probably for attachment to clothing, or even a jester’s hat given this is an unusually massy example (cf. Egan and Prtichard 1991, fig. 219). Suggested date: Late Medieval, 1350-1400 Height: 25.5mm, Diameter: 21.9mm, Weight: 13.10gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-54C694
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Lead weight. Cast discoid weight with an uneven surface with off-centre dimple and a flat base; perhaps cast in an open mould suggesting the flat side to have been uppermost at the time of fabrication. Opposed pairs of nicks appear on the flat side. The metal retains a grey tint suggesting its relatively recent date. Though a weight close to this mass was reported from the London waterfront (Egan 1998, table 15) though it was not thought to respect any prevailing standard. This object might alternatively represent one and a half averdepois ounces, perhaps as a homemade weight for the k…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-549D42
Object type: BELL
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy bell. Cast one-piece spherical animal bell, with opposed blowholes in its upper hemisphere and opposed sounding holes linked by a slot in the lower. Incised letters next to the slot may be a maker’s or owner’s mark, possibly reading I G. A pronounced circumferential rib marks the meeting of the two halves; the upper part is surmounted by a rectangular loop. Abraded, with loss of half the lower hemisphere and the clapper. Suggested date: Post-Medieval, 1500-1650 Height: 34.8mm, Diameter (at mid-rib): 30.3mm, Thickness (wall): 2.3mm, Weight: 25.06gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-54544C
Object type: WEIGHT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Lead weight. Cast discoid weight with an uneven upper surface on which appear straight lines moulded in bold relief. The lines may represent two separate arrowhead forms or perhaps an untidy monogram including letter forms resembling M and V. On the base – or the top as cast in an open mould - there is a central dimple with a crudely incised triangle around it. Patinated. The combination of relief features, dimple and incised base recur in medieval London (e.g. Egan 1998 fig. 233 no. 993, see also no. 990) where they may respect a medieval standard (ibid. table 15), and were poss…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-5435BB
Object type: BUCKLE
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible buckle fragment, as kindly suggested by the finder. A small cast loop with a markedly projecting lip in the zoomorphic form of a pointed beast head with prominent sub-triangular eyes or ears upstanding on top and with a grooved or hollowed underside; the putative strap bar is absent. The reddish tint of the metal is a feature often associated with Anglo-Scandinavian metalwork. Suggested date: Early Medieval, 900-1000 Length: 20.3mm, Height: 14.7mm, Thickness (at snout): 2.3mm, Weight: 1.25gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: NLM-54106C
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Copper alloy brooch. A small cast Colchester derivative brooch with a sprung rear-hook fastening [spring lost], Mackreth type CD RH 5.k. Semi-circular or concave wings open behind are clasped by a plain bow of rounded section with the broken stub of a rearward-facing hook on the top of the bow. The bow tapers towards a plain foot though only an area of roughened texture may indicate the former position of a catch plate. Suggested date: Early Roman, 50-100 Length: 20.5mm, Width: 18.1mm, Thickness (crest of bow): 5.7mm, Weight: 3.18gms
Created on: Tuesday 9th April 2024
Last updated: Wednesday 10th April 2024
Spatial data recorded. This findspot is known as 'near Market Rasen', grid reference and parish protected.

Record ID: NLM-53EE38
Object type: MOUNT
Broad period: POST MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy possible mount fragment. A pressed metal concavo-convex decorative plate of rhomboid form overall representing stems at the top over four florets and with three small leaves below, all these details appearing reversed on the back. Suggested date: Post-Medieval, 1850-1900 Length: 29.5mm, Width: 16.8mm, Thickness: 0.5mm, Weight: 0.87gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Caistor', grid reference and parish protected.

Record ID: NLM-53A0B2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy harness pendant, as kindly identified by the finder. Cast lozengiform plate with an oval top loop at right angles to its display plane. The surface is crazed and the object slightly curled overall, perhaps both effects arising from the exposure of the object to intense heat. Despite this damage, the ghost of a border to a motif is discernible. Suggested date: Medieval, 1300-1400 Length: 45.7mm, Width: 34mm, Thickness (plate): 2mm, Weight: 9.32gms
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Gayton le Wold', grid reference and parish protected.

Record ID: LIN-539AEC
Object type: BUCKLE
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A complete medieval gilded cast copper alloy spur buckle with integral plate, dating from c.AD 1350 - 1500 Single looped oval buckle with a tapered integrally cast plate with arrowhead terminal. The buckle is D-shaped in cross-section and is decorated with two globular knobs on both outside corners, framing two pairs of double raised longitudinal bands. A rib divides the buckle from the body of the plate from its end where a pin passes through a hole. The cast pin is intact and has a raised vertical ridge situated about half down its length, and it tapers to a…
Created on: Tuesday 9th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded. This findspot is known as 'Burgh Le Marsh', grid reference and parish protected.

Record ID: NLM-537C75
Object type: INGOT
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
White metal ingot. A cast oval fragment of dense bright white metal which has been tightly rolled, hammered to round-ended cylindrical form and subsequently indented. Similar objects have been submitted to the Treasure process in the past as potential silver ingots, though they have frequently been considered of recent date by early medieval period specialists based at the British Museum, either with or without the identification of the material by laboratory investigation. The mass of the object does not coincide closely with that of a series of weights – derived from the Scandi…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: LIN-536115
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A gilded copper alloy harness pendant dating from the Medieval period, about AD 1200 - 1400. The pendant is flat and shield-shaped with a flat top that has curved sides, tapering to a point. A circular loop, rectangular in cross-section, projects from the flat top edge. One side is decorated with an incised drop-shape design and a central rectilinear band delineated by grooves. Both sides of the band have parallel designs of curvilinear motifs, with the upper motif carrying scaled lentoid pattern. Gilding mainly over the front surface and traces on the reverse…
Created on: Tuesday 9th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Friskney', grid reference and parish protected.

Record ID: LIN-5349D2
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy heraldic harness pendant dating from the Medieval period, about AD 1200 - 1400. The pendant is hexagonal with six projections, five of which terminate with trefoils. The top arm expands and is bificated from which projects a loop that is rectangular in cross-section and has a raised collar. The loop is circular. The hexagonal plate is decorated with two enamelled halves: one red and one blue. The decoration is very worn and undecipherable. There are traces of gilding on the plate. The reverse is flat. Dark green patina. Length: 38.98 mm; Width: 27.10 mm;…
Created on: Tuesday 9th April 2024
Last updated: Thursday 11th April 2024
Spatial data recorded. This findspot is known as 'Thorpe St. Peter', grid reference and parish protected.

Record ID: NLM-533DAA
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Voided long cross cut halfpenny of Henry III (1216-1272) by an uncertain moneyer – Wille [as here] is unlisted though a Willem does appear. Probably class 5b issue of 1250-1256 Obverse description: facing bust with sceptre left, hair [right] of two neat curls and pellets, beard of two lines of pellets. Obverse inscription: (---)ICVS RE  (---) Reverse description: voided long cross, three pellets in each angle. Reverse inscription: WIL/LE./(--) Diameter: 16.9mm, Weight: 0.61gms, die axis: possibly 6
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.

Record ID: LIN-532D1C
Object type: HARNESS PENDANT
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
A copper alloy harness pendant hanger dating from the Medieval period, about AD 1200 - 1400. The hanger is D-shaped in cross-section and has a central sexfoil plate decorated with three raised flower, stems or branches terminating with a lobed head, possibly a quatrefoil but the pattern is very worn. Surrounding the stems are traces of red enamel. The plate has two plates projecting from two sides: one is broadly rectilinear with a rounded end with elongated rectangular knop at the terminal. A rivet hole, missing its rivet, sits centrally in the roun…
Created on: Tuesday 9th April 2024
Last updated: Monday 15th April 2024
Spatial data recorded. This findspot is known as 'Thorpe St. Peter', grid reference and parish protected.

Record ID: NLM-531AAE
Object type: COIN
Broad period: MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Silver coin. Halfpenny of Edward III (1327-1377); if not perhaps a penny of Edward IV (1461-1470 and 1471-1483), probably York mint. The tall crown of Edward III’s Fourth Coinage (1351-1377) is perhaps the earliest this coin’s obverse could belong to, so this should be a later medieval issue of 1351-1483 Obverse description: facing bare-shouldered bust with tall bifoliate crown whose ornaments appear to touch; initial mark Plain cross. Obverse inscription: possibly +E[---]ANGLI Reverse description: long cross, three pellets in each angle, central quatrefoil Reverse…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Welton le Wold', grid reference and parish protected.

Record ID: NLM-52BFC1
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy brooch fragment. The lower part of the bow of a great square-headed brooch, in two joining fragments extending from below a putative mid-bow moulding [lost]. The uppermost part bears opposed sub-triangular lappets occupied by Salin style I decoration with a rectangular panel between them. The top of the rectangular panel is marked by a horizontal rib in relief with close-spaced cuts across it. The sides of the panel bear traces of a border of small crescentic stamps forming a zig-zag line to either side. A horizontally grooved but otherwise plain basal rib completes the re…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Raithby cum Maltby', grid reference and parish protected.

Record ID: NLM-527083
Object type: SOCKETED AXEHEAD
Broad period: BRONZE AGE
County: Lincolnshire
Workflow stage: Awaiting validation
Copper alloy socketed axe-head. Cast copper alloy axe-head with a crescentic cutting edge, a plain body with slightly concave upper and lower sides and a sub-rectangular socket measuring 32.7mm in height and 28.4mm in width [externally]. A single loop of length 23.5mm is set on one side on the mould line at a distance of 9.5mm from the socket. Six triangular-section fragments of pale buff and desiccated wood were presented along with the object together with smaller splinters and dust, with slight evidence of green staining, and are regarded by the finder as relict fragments of a woode…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'near Linwood', grid reference and parish protected.

Record ID: NLM-51DC83
Object type: INGOT
Broad period: MODERN
County: Lincolnshire
Workflow stage: Awaiting validation
White metal ingot. A short cylindrical object with rounded ends and hammered overall. The metal is bright and dense. Similar objects have been submitted to the Treasure process in the past as potential silver ingots, though they have frequently been considered of recent date by early medieval period specialists based at the British Museum, either with or without the identification of the material by laboratory investigation. The mass of the object does not coincide closely with that of a series of weights – derived from the Scandinavian ora/ore - considered to have governed Vikin…
Created on: Tuesday 9th April 2024
Last updated: Tuesday 9th April 2024
Spatial data recorded. This findspot is known as 'Calcethorpe', grid reference and parish protected.