Record ID: LVPL-8B6538
Object type: COIN
Broad period: ROMAN
County: Cheshire East
Workflow stage: Published
Silver Denarius of Domitian, minted in Rome, IMP XXI COS XV CENS P P P, AD 90. RIC II (2nd ed) no. 149.
Created on: Wednesday 2nd May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Whitchurch', grid reference and parish protected.

Record ID: LVPL-994942
Object type: FINGER RING
Broad period: MEDIEVAL
County: Manchester
Workflow stage: Awaiting validation
Copper alloy finger ring, probably medieval in date. The outside surface of the ring is decorated with lines which make a zig-zag pattern and a dot in each triangle. The inside surface is plain and smooth. It is D-shaped in section. The ring has been cast but the decoration appears to have been added after casting. Cast copper alloy finger rings were found in London dating to the medieval period (Egan and Pritchard; 1991; 331-2).
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-9BC925
Object type: COIN
Broad period: MEDIEVAL
County: Leicestershire
Workflow stage: Awaiting validation
Medieval silver hammered half-penny, probably of Edward III. The reverse is completely worn and nothing can be seen on it.
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-9BF1D0
Object type: COIN
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy twopence (also known as a turner or a bodle) of Charles II from his first coinage in 1663 Seaby, no.5625 (1972; 94). Part of the edge has been squashed slightly into a straight edge.
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-A05131
Object type: COIN
Broad period: MEDIEVAL
County: North Lincolnshire
Workflow stage: Awaiting validation
Edward I half penny, Withers Class 4, 1282-9.
Created on: Thursday 3rd May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-AEC2E4
Object type: HARNESS FITTING
Broad period: POST MEDIEVAL
County: Wirral
Workflow stage: Awaiting validation
Copper alloy strap separator, probably from harness. A ring which splits into three sections then joins again to complete the ring. It is 8.5mm wide when it is a single strip, when it splits into three it widens to 23mm. The central strip follows the line of the ring, the two exterior strips are at 45degrees to this. This was probably used to divide straps on a harness fitting
Created on: Friday 4th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-03B241
Object type: VESSEL
Broad period: POST MEDIEVAL
County: Flintshire
Workflow stage: Awaiting validation
Copper alloy leg of a post-medieval skillet or pipkin, a cauldron type vessel with 3 legs. The object is anthropomorphic in style, representing a human leg and foot. The leg is triangular in section. Above the foot is a protruding lip, the foot is then flat on the floor. A leg of the same style was found in York and dates to the late 15th- early 16th centuries (Ottaway and Rogers; 2002; 2809-10) but similar styles continued until around the 18th century.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LVPL-03F9B2
Object type: WEIGHT
Broad period: POST MEDIEVAL
County: Flintshire
Workflow stage: Awaiting validation
Post-medieval lead weight. The weight is cylindrical with a hollow centre. this hollow is now filled with mud. One end of the weight has been broken so the edge is not straight.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: LVPL-054994
Object type: COIN
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Silver hammered half-groat of Charles I, North No 2251.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-059BC2
Object type: BROOCH
Broad period: ROMAN
County: Cheshire East
Workflow stage: Awaiting validation
Roman bow brooch with some blue and orange enamel remaining. A derivative of a Wirral/ trumpet type bow brooch. This is an unusual variation and has some nice detail remaining. The bow is very pronounced and the body of the brooch is quite short. The main body of the brooch is complete although it has broken before the foot. The pin was on a spring of 4 turns and this still reamins although the pin is now missing. Some of the catchplate is present. The head plate takes the form of 3 steps which are enamelled with orange. There could have been a loop at the top as there is a broken edg…
Created on: Tuesday 8th May 2007
Last updated: Friday 22nd May 2020
Spatial data recorded.

Record ID: LVPL-05A531
Object type: JETTON
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Copper alloy jeton of the rose/orb series (Mernick and Algar; 2001; 247/8). This type of jetton dates from the 16th through to the 17th century and are popularly called stock jettons (ibid). The obverse is completely worn/corroded away. The reverse has a double trilobe which contains a reichsapfel (imperial orb- an orb with a cross on the top). None of the inscription can be seen on either side as it has totally worn away. A similar example can be seen on page 259, no. 264 (Mernick and Algar; 2001). This jetton has been pierced, perhaps for use as a pendant.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-05ABA0
Object type: DRESS HOOK
Broad period: POST MEDIEVAL
County: Cheshire East
Workflow stage: Awaiting validation
Copper alloy tudor dress hook which has a central circular boss, a trapezoidal loop and a hook. The dress hook is complete except that the very end of the point of the hook has broken off. The hook tapers from the bottom of the central boss. The circular, central boss is decorated with a moulded flowerhead. The loop at the top of the boss is trapezoidal.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-05B7D1
Object type: COIN
Broad period: ROMAN
County: Cheshire East
Workflow stage: Published
Roman quadrans, RIC II (Anon. Quadrantes), 32. C. AD 81 - c. AD 161 Some of the edge is missing, due to corrosion. The same type of coin has also been found at Beverley (Yorkshire – YORYM–C11BD1).
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-078D84
Object type: BLADE
Broad period: NEOLITHIC
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Early Neolithic flint blade. The blade is trapezoidal in shape and in cross-section. 2 flakes have been knapped from one face, one on each side. One edge of the tool has been worked to give it a serrated edge. The tool has broken and so is incomplete- it would have been longer when it was made.
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-079CD2
Object type: BROOCH
Broad period: ROMAN
County: Cheshire West and Chester
Workflow stage: Published
Roman copper alloy Polden Hill booch fragment. The crest of the head is quite rounded and the bow tapers to a point at the end, although no foot remains. The hinged pin, catchplate and pin mechanism are all missing. The brooch is quite corroded all over but it is quite likely that this brooch would have been plain anyway.
Created on: Tuesday 8th May 2007
Last updated: Friday 22nd May 2020
Spatial data recorded.

Record ID: LVPL-07AAB3
Object type: PIN
Broad period: EARLY MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Anglo-Saxon, copper alloy, polyhedral pin head. Only a small part of the shaft of the pin remains. No collar can be seen. Each face is lozenge shaped and plain, with no decoration
Created on: Tuesday 8th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-2E8A75
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy furniture fitting dating to the post-medieval period. It is most likely to be a decorative handle. The object consists of 2 parts which have been combined to make the handle. The piece which attaches to the furniture is a screw which leads to a circular disc (which would have been flat against the surface of the piece of furniture) at the top of a cylinder. This cylinder is then attached to a large circular disc. The disc is concave on the outside face. In this concave section is the face of a lion which was cast as part of the disc. This would have been the face visibl…
Created on: Thursday 10th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.

Record ID: LVPL-304FC4
Object type: BROOCH
Broad period: ROMAN
County: North Yorkshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman Dragonesque brooch. This type of brooch is essentially Celtic in design but is Roman made and continued to be made until the middle of teh 2nd century AD. They are an entirely British type of brooch (Hattatt; 1982; 152). The brooch has a raised surface and a flat back. Two of the heads remain, there would have been three originally. Both the heads are broken, the hole (which represents the eye) is incomplete on both. The semi-circle central part of the brooch represents the body of the dragon and has a circular perforation.
Created on: Thursday 10th May 2007
Last updated: Friday 22nd May 2020
Spatial data recorded. This findspot is known as 'Selby', grid reference and parish protected.

Record ID: LVPL-307183
Object type: FURNITURE FITTING
Broad period: POST MEDIEVAL
County: North Yorkshire
Workflow stage: Awaiting validation
Copper alloy knob handle probably from the Post-medieval or modern periods. The weight is spherical with 2 small protrusions, one at each end. The top protrusion is rectangular in section. The lower one is circular. Both appear broken- it is not known what they were attached to. The top half of the main body of the weight is separated from the lower half by medial raised line. A very similar example has been found in Middlesborough (Curmmy; 1988; 42), which has been dated to the late Post-medieval or modern periods.
Created on: Thursday 10th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Selby', grid reference and parish protected.

Record ID: LVPL-82DD34
Object type: COIN
Broad period: MEDIEVAL
County: Cheshire West and Chester
Workflow stage: Awaiting validation
Silver hammered penny of Richard II, North no 1329 or 1330
Created on: Monday 14th May 2007
Last updated: Thursday 24th February 2011
Spatial data recorded.