Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014358F907011B7
    • Sort: created
    • Object type: BROOCH
    • Page: 4

  • Thumbnail image of KENT-9516EB

Record ID: KENT-9516EB
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a small radiate-headed brooch dating from 500 -570 AD Description: The head is semi-circular in shape with three small knobs, one at the apex and one at each corner. The head plate has incised circular decoration around its edge. The beginning of the short, low bow is still attached to the base of the head plate, but the remaining portion of the bow and the triangular footplate has snapped off. On the reverse of the head the pin bar lug is still present, but has been heavily corroded on the left side of the lug (as seen by the viewer). Measurements: 18.20mm long, 24.29m…
Created on: Friday 1st March 2019
Last updated: Thursday 14th March 2019
Spatial data recorded.


  • Thumbnail image of OXON-802C9F

Record ID: OXON-802C9F
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy Roman Colchester brooch type with double pieced lug, Harlow type, dating to the 1st century AD. The brooch is almost complete, missing only its pin. The wings of the brooch are C-shaped in profile with a double lug in the centre of the arms and head to take the coiled spring wire. This wire is of a different alloy to the brooch, being more silver in colour. The bow of the brooch has a raised longitudinal ridge down the spine which is closely serrated (and worn). A faint, thin rib runs down either edge of the ridge. The foot of the brooch has a chalky soi…
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of OXON-7F73E7

Record ID: OXON-7F73E7
Object type: BROOCH
Broad period: ROMAN
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy Roman plate brooch of probable Continental origin, dating to the second century AD. The brooch has a semi-circular plate and a moulded fan tail projecting from the apex of the curve. A broken element may be seen on the left lower corner. An old worn break can be seen across the flat base of the semi-circular body. The semi-circular body has a raised circular cell in its centre which is filled with red enamel. The surround field is recessed and contains the remains of a blue enamel, now coloured light green. On the reverse of the brooch behind the join of…
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Image not taken

Record ID: WILT-7DFF1E
Object type: BROOCH
Broad period: ROMAN
County: Dorset
Workflow stage: Awaiting validation Find awaiting validation
A fragment of Late Iron Age to early Roman copper alloy brooch, probably dating from AD 25-75. A hinged strip bow brooch, with only its head and upper bow remaining. The head of the brooch is damaged, but originally consisted of a rectangular sheet of copper alloy rolled under itself to form the wings for a lost axis bar; the right wing has been lost whilst the left is now broken at the fold. A rectangular slot was cut into the reverse of the head to accommodate a hinged pin, which is lost. From the head the bow tapers into an old break. The upper bow is decorated with a recessed chann…
Created on: Thursday 28th February 2019
Last updated: Friday 1st March 2019
Spatial data recorded.


  • Image not taken

Record ID: WILT-7C1D3C
Object type: BROOCH
Broad period: ROMAN
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy probable Colchester derivative brooch, probably dating to c. AD 50-150. The surviving fragment comprises of the lower bow and foot only, with the upper bow lost to an old break. The bow tapers into a pointed foot, with an integral, unperforated sub-triangular catch plate projecting from the reverse, with pin rest leaning to the right. The bow of the brooch is undecorated. Length 29.5mm; width 2.2mm; thickness 10.2mm; weight 1.74g.
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of SUR-79EB9C

Record ID: SUR-79EB9C
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A large Roman copper alloy Langton Down type brooch, with cylindrical wings, a bevelled bow with lozengiform cross section and an openwork catchplate. The spring and axis bar are housed within the wings; the pin is missing. The catchplate has two pierced apertures with a Z-shaped central bar. The surface is undecorated aside from a moulded collar at the shoulder of the wings and moulded linear borders around the tips of the wings. Circa mid 1st century AD.
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of SUR-79B5F2

Record ID: SUR-79B5F2
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A Roman copper alloy umbonate type plate brooch comprising a convex domed plate, with a deeply moulded border and a concentric arrangement of two rings of triangular enamel cells (7 inner, 14 outer) with a small single central hole on the central boss. Traces of blue enamel remain in several cells. There are four peripheral knops around the edges of the plate, at the cardinal points; two of which form part of the catchplate and hinge which project slightly from the plate. The hinge knop has the remnant of a suspension loop, now broken and the (now bent) copper alloy pin remains in plac…
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-7993B5

Record ID: KENT-7993B5
Object type: BROOCH
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A fragment of cast copper-alloy Roman crossbow brooch of late 3rd to early 4th century AD. Description: The brooch fragment is roughly T-shaped, and shows evidence of having separate knops at the end of the cylindrical collared wings. A third knop positioned in the middle over the central slot or separate and attached via the in situ projecting point.. The slot is filled with corrosion and would have, in addition to a possible seperate knop would also affixed the hinged pin for the brooch. The bow protrudes from the centre of the cross bar and is very low and has broken just past the …
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-797455

Record ID: KENT-797455
Object type: BROOCH
Broad period: IRON AGE
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast middle to late Iron Age brooch, early 4th-2nd century BC. Description: The brooch is incomplete although only the pin at the spring end, part of the spring and part of the foot (?) is missing. The head comprises a vertically aligned flat sided pierced knop through which the axis bar would have passed. This bow, which is of roughly circular section and tapers towards the foot, where it loops upwards to a break which may, comparing to similar brooches of the type (e.g BH-CAC2F8) formed an openwork catch plate. The catch plate has an angled upper side, a sub-triangular…
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of KENT-782B34

Record ID: KENT-782B34
Object type: BROOCH
Broad period: ROMAN
County: Kent
Workflow stage: Awaiting validation Find awaiting validation
A Fragment of copper-alloy probable Colchester derivative brooch likely c. 15 BC - AD 100. Description: The fragment represents the catchplate and foot terminal of a brooch. Its' upper surface of the bow has a raised cast ridge by way of decoration along the bow. The terminal features solid catach plate. Measurements: 25.33mm in length, 15.98mm high, 4.37mm wide and 2.8g in weight.
Created on: Thursday 28th February 2019
Last updated: Thursday 28th February 2019
Spatial data recorded.


  • Thumbnail image of IOW-6F34F0

Record ID: IOW-6F34F0
Object type: BROOCH
Broad period: ROMAN
County: Isle of Wight
Workflow stage: Awaiting validation Find awaiting validation
An incomplete Roman copper-alloy hinged Developed T-shaped brooch (AD 75-150). The majority of the pin and the lower part of the bow including the catch-plate are missing. The head is formed of sub-cylindrical wings, circular in cross-section, except at the front where they are flattened slightly. The wings have a maximum depth of 5.0mm and a maximum thickness of 5.1mm. There is a central slot behind the wings that contains a fragment of the loop of hinged pin. The loop is held in position by an iron axis bar which runs through the wings and across the slot. In side view, the bow is …
Created on: Wednesday 27th February 2019
Last updated: Wednesday 6th March 2019
Spatial data recorded. This findspot is known as 'Isle of Wight', grid reference and parish protected.


  • Thumbnail image of OXON-6B8D7D

Record ID: OXON-6B8D7D
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Oxfordshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy ansate or equal-armed brooch dating to the early medieval (Middle Saxon) period, c. AD 750-900. The brooch has two rounded terminals joined by an arched bow which is D-shaped in section. The terminals are decorated with four punched ring-and-dot motifs; one terminal has three motifs stamped on top of each other. Three ring-and-dot motifs appear on the bow, with V-shaped notches on the edge of bow at the pin lug end. On the reverse of the brooch is a hooked catch and a single pin lug. The pin is missing. Similar brooches were recovered from the Ipswich Town Ex…
Created on: Wednesday 27th February 2019
Last updated: Friday 1st March 2019
Spatial data recorded.


  • Thumbnail image of BERK-6748D4

Record ID: BERK-6748D4
Object type: BROOCH
Broad period: ROMAN
County: Windsor and Maidenhead
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy Hod Hill brooch dating to AD 43-65. The brooch is possibly tinned. The fragment consists of a broken fragment of the upper part of the bow, the leg, foot, and catch-plate. The upper part of the bow is D-shaped in cross-section, and is slightly arched. The bow fragment is decorated with a central longitudinal ridge which has two horizontal grooves incised on the spine of the ridge. There is a deep groove on either side of the ridge. Below the bow there is a horizontal groove and then a ridge which separates the bow from the leg. The leg is triangular i…
Created on: Wednesday 27th February 2019
Last updated: Tuesday 12th March 2019
Spatial data recorded.


  • Thumbnail image of BERK-6737B9

Record ID: BERK-6737B9
Object type: BROOCH
Broad period: ROMAN
County: Windsor and Maidenhead
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman Colchester derivative, double pierced lug, Harlow type brooch dating to 1st century AD (c. AD 43-100). The object consists of the head complete with C-sectioned wings accommodating the spring. The spring is 31 mm in width, and 6 mm in thickness, and coils around forming five hoops of the spring in each wing. The final hoop on in the right wing extends over crossing the centre of the brooch and bends, ending in an old break about a third of the way down. There is a top loop on the crest of the bow at the head that holds the spring in place. The bow arch…
Created on: Wednesday 27th February 2019
Last updated: Tuesday 12th March 2019
Spatial data recorded.


  • Thumbnail image of BERK-67205E

Record ID: BERK-67205E
Object type: BROOCH
Broad period: ROMAN
County: Windsor and Maidenhead
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman Colchester derivative brooch with double pieced lug, Harlow type, dating to the 1st century AD (c. AD 43-100). The brooch is missing the spring, pin, bottom half of the bow, and catch plate. The wings of the brooch are C-shaped in cross-section with a double lug in the centre of the arms and head. On the surface of both wings there two vertically incised grooves. The right wing is worn and has a rectangular break at the upper and lower edge. The bow is D-shaped in cross-section, and ends in an old break mid-way down. The bow of the brooch has a raised l…
Created on: Wednesday 27th February 2019
Last updated: Tuesday 12th March 2019
Spatial data recorded.


  • Thumbnail image of BERK-671304

Record ID: BERK-671304
Object type: BROOCH
Broad period: ROMAN
County: Windsor and Maidenhead
Workflow stage: Awaiting validation Find awaiting validation
An incomplete copper alloy Roman Colchester derivative brooch with double pieced lug, Harlow type, dating to the 1st century AD (c. AD 43-100). The brooch is missing the spring, pin and catch plate. The wings of the brooch are C-shaped in cross-section with a double lug in the centre of the arms and head. On the surface of both wings there two vertically incised grooves. The left wing is worn around the terminal edge. The right wing is also worn and has a square-shaped chip broken off at the terminal edge. The bow is D-shaped in cross-section, and narrows to curved foot. The bow of the…
Created on: Wednesday 27th February 2019
Last updated: Tuesday 12th March 2019
Spatial data recorded.


  • Thumbnail image of OXON-6648EA

Record ID: OXON-6648EA
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy saucer brooch of early Anglo-Saxon date (c. AD 450-600). The brooch has an incomplete outwardly-turned rim around a central panel of decoration. The cast decoration is partly obscured by concretion but depicts a central circular motif with an equal-armed cross, and is surrounded by a repeating interlace design possibly of an entwined beast. Gilding survives over much of the outer face. The reverse of the brooch retains both the catch plate and single lug for the pin. This brooch was found along with another of identical design, and this may suggest the p…
Created on: Wednesday 27th February 2019
Last updated: Saturday 2nd March 2019
Spatial data recorded.


  • Thumbnail image of OXON-65D2A2

Record ID: OXON-65D2A2
Object type: BROOCH
Broad period: EARLY MEDIEVAL
County: Wiltshire
Workflow stage: Awaiting validation Find awaiting validation
An incomplete cast copper alloy saucer brooch of early Anglo-Saxon date (c. AD 450-600). The brooch has an incomplete outwardly-turned rim around a central panel of decoration. The cast decoration is partly obscured by concretion but depicts a central circular motif with an equal-armed cross, and is surrounded by a repeating interlace design possibly of an entwined beast. Gilding survives over much of the outer face. The reverse of the brooch retains both the catch plate and single lug for the pin but iron corrosion adheres to this area, indicative of an iron pin, a common feature of t…
Created on: Wednesday 27th February 2019
Last updated: Saturday 2nd March 2019
Spatial data recorded.


  • Image not taken

Record ID: WILT-567CDE
Object type: BROOCH
Broad period: ROMAN
County: Hampshire
Workflow stage: Awaiting validation Find awaiting validation
A fragment of a Roman copper alloy Colcehster derivative brooch, probably dating to c. AD 50-150. The fragment consists of the lower bow and foot only. The bow tapers into a point, although with a slight projecting foot when viewed in profile. AN unperforated catchplate projects from the reverse. Length: 33.2mm; width: 14.5mm; thickness: 1.3mm; weight 1.55g.
Created on: Tuesday 26th February 2019
Last updated: Tuesday 5th March 2019
Spatial data recorded. This findspot is known as 'Rockbourne CP', grid reference and parish protected.


  • Thumbnail image of LEIC-554C09

Record ID: LEIC-554C09
Object type: BROOCH
Broad period: IRON AGE
County: Leicestershire
Workflow stage: Awaiting validation Find awaiting validation
Late Iron age to early Roman copper alloy Le Tene III bow brooch, 37mm in length, 9mm wide and 3mm thick with a weight of 2.98grams. The brooch is intact except for its pin. It consists of a circular cross sectioned curved bow which gradually widens and becomes sub rectangular in cross section towards its base to accommodate a very shallow catch plate. At its head it is a spring of four coils attached by a fold under the bow.
Created on: Tuesday 26th February 2019
Last updated: Wednesday 6th March 2019
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 39,365
Search server index: asgard

You are viewing records: 61 - 80.

Search statistics

  • Total quantity: 39,983
  • Mean quantity: 1.016
  • Maximum: 300

Filter your search

Reece Period

61 - 80 of 39,365 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.