Back to simple search | Back to advanced search

    You searched for:

    • Idby: 0014358F907011B7
    • Sort: broadperiod
    • Object type: BROOCH
    • Workflow: Record published
    • Institution: WAW

  • Thumbnail image of WAW-0E74F2

Record ID: WAW-0E74F2
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
A Roman Colchester derivative, Polden Hill (Mackreth Group 4, flat wing ends type), Mackreth 2011, 4.e. Plate 47.The wings are semi-cylindrical with wing caps. The caps each have a small central hole which would have supported the axis bar. One hole is incomplete. The axis bar, spring and pin are all missing. The front face of each wing is decorated with a vertical central ridge. The bow head is hump-like in profile, but in section it is a 'V' shape. This groove continues down the bow and gradually tapers. In the centre of the bow head, towards the wings, there is a large integral hoo…
Created on: Wednesday 1st February 2006
Last updated: Thursday 16th February 2017
Spatial data recorded.


  • Thumbnail image of WAW-0E85F2

Record ID: WAW-0E85F2
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The copper alloy brooch is a Colchester derivative, Polden Hill (Mackreth Part 3, Group 4.g, flat wing ends type). It is incomplete, in poor condition. The wings of the brooch are semi-cylindrical, however, both wings are abraded and do not have their original terminals. Only a fragment of one wing remains, whereas the other is incomplete. It is uncertain whether the incomplete wing is decorated. The axis bar, spring and pin are all missing. The bow head is hump-like and is sub-oval in section. The junction between the bow head and wings has a 'u' shaped groove which probably original…
Created on: Wednesday 1st February 2006
Last updated: Tuesday 25th July 2017
Spatial data recorded.


  • Thumbnail image of WAW-100874

Record ID: WAW-100874
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
An incomplete cast copper alloy Roman brooch of Colchester derivative, Polden Hill (Mackreth Type 1, flat wing ends type), dating from the late 1st to early 2nd centuries, circa AD 43-120. The brooch is a Polden Hill type. Part of the spring, the pin and the catch plate are missing due to old breaks. The wings have a hollow, semi-cylindrical form with perforated wing caps at both ends. One of the wing caps is slightly damaged. The wings contain a partially surviving copper alloy spring which has 11 coils within one wing and 3 coils to the other. An incomplete spring bar is just visibl…
Created on: Monday 11th November 2013
Last updated: Thursday 26th January 2017
Spatial data recorded.


  • Thumbnail image of WAW-2692B8

Record ID: WAW-2692B8
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (Mackreth Group 4, flat wing ends type), cf.Mackreth 2011, 4.d Pl. 47. It has been made from cast copper alloy. Polden Hill type brooches date to the first century. Hattatt illustrates a similar brooch in Brooches of Antiquity, No. 900. , cf. The wings are semi-cylindrical terminating with wing caps. The wing caps support a copper alloy axis bar, around which the spring is coiled. The spring has 8 coils, and forms a horizontal bar which is held in place by a small hook which is integral to the reverse of the wing. The pin is missing.…
Created on: Monday 10th January 2005
Last updated: Monday 30th January 2017
Spatial data recorded.


  • Thumbnail image of WAW-26C3A2

Record ID: WAW-26C3A2
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative, Polden Hill (Mackreth Group 5, Western Group, flat wing ends type), Mackreth 2011, 5.a4. Plate 50, no. 1585, Lower Severn Valley. The wings are semi-cylindrical terminating with wing caps. The wing caps support a copper alloy axis bar, around which the spring is coiled. The spring has 7 coils visible, and forms a horizontal bar which is held in place by a small hook which is integral to the reverse of the wing. The pin is missing. The bow head is hump-like and is decorated with 'Y' shaped groove which taper along the bow. The bow is oval in s…
Created on: Monday 10th January 2005
Last updated: Monday 30th January 2017
Spatial data recorded.


  • Thumbnail image of WAW-26D572

Record ID: WAW-26D572
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative, Polden Hill (Mackreth Group 4, flat wing ends type, West Midlands), Mackreth 2011, 4.a-4.b, 4c, Plate 46. It is produced from cast copper alloy. Polden Hill type brooches date to the first century. Hattatt illustrates a similar brooch in Brooches of Antiquity, No. 898. The wings are semi-cylindrical terminating with wing caps. The wing caps are abraded and incomplete. The axis bar, coil and pin are missing. The bow head is hump-like and on both sides a moulding is present at the junction between the bow and the wings. The bow is oval in secti…
Created on: Monday 10th January 2005
Last updated: Monday 30th January 2017
Spatial data recorded.


  • Thumbnail image of WAW-294B21

Record ID: WAW-294B21
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative, Polden Hill (Mackreth Group 4, flat wing ends type, abnormal moulded stud in form of a boss), Mackreth 2011, 4.l.b. Plate 49. It has been made from cast copper alloy. Polden Hill type brooches date to the first century. Hattatt illustrates a similar brooch in Brooches of Antiquity, No. 904. The wings are semi-cylindrical terminating with incomplete wing caps. The axis bar, pin and spring are now missing. The wings are moulded in relation to their diameter. The terminals of the wings are the widest points, they then taper to the mid point befor…
Created on: Monday 10th January 2005
Last updated: Monday 30th January 2017
Spatial data recorded.


  • Thumbnail image of WAW-296D40

Record ID: WAW-296D40
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (flat wing ends type, Eastern Group). It has been made from cast copper alloy. Polden Hill type brooches date to the first century. Hattatt illustrates a similar brooch in Iron Age and Roman Brooches, No. 382. The wings are semi-cylindrical, however only one wing remains, which terminates with an incomplete wing cap. The axis bar, pin and spring are missing. The wings are decorated with to oblique parallel grooves with small linear notches between. The bow head is hump-like and has a prominent vertical ridge which tapers on the bow.…
Created on: Monday 10th January 2005
Last updated: Thursday 6th October 2016
Spatial data recorded.


  • Image not taken

Record ID: WAW-451DF8
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
Only the lower portion of the brooch remains, which consists of the bow and catchplate. It is made from cast copper alloy and measures from the tip of the bow to the foot 41.9mm long and the bow is 4.4mm wide. The bow is broken, at approximately it mid point. The break is not recent and is now rounded. In section it is an oval shaped section. The bow tpaers to a blunt point. Integral to the reverse of the bow is a catchplate which has a triangular hole as decoration. The curled edge of the catchplate is missing, probably due to abrasion. The surface of the brooch is a m…
Created on: Tuesday 2nd March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: WAW-454034
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is made from cast copper alloy. From the bow head to the bow foot it measures 37.4mm long and is 17.7mm wide across the wings. The wings are semi-cylindrical with wing caps. The wing caps are incomplete. The wings are decorated with two vertical grooves at each tip. The bow head is slightly hump-like and protrudes from the upper edge of the wings. In the centre of the upper edge of the wings is a small protrusion towards the reverse which was originally a hook or loop to support the spring. The bow head is decorated with a central wide groove bordered by a more fi…
Created on: Tuesday 2nd March 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Image not taken

Record ID: WAW-D97D10
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The Roman brooch is Colchester derivative, Polden Hill (Mackreth 2011, Part 3, Group 5.a2, flat wing ends type, Western Group). The length, from the bow head to the bow is 13.8mm, across the wings it is 22.6mm. The wings are semi-cylindical. One terminal has a wing cap remaining, which is itself incomplete. The other terminal is missing, and the break is not recent. The axis bar, spring and pin are missing. The bow head is slightly hump-back, and is sub-rectangular in section. It is decorated with a prominent vertical ridgewhich rises above the wings. Usually you would expect this…
Created on: Tuesday 9th March 2004
Last updated: Thursday 20th July 2017
No spatial data available.


  • Thumbnail image of WAW-FF7527

Record ID: WAW-FF7527
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is probably a Colchester Two-Piece Brooch, possibly a Trumpet type. It is made of cast copper alloy with an iron axis bar and spring. Its dimensions across the wings is 23.7mm, and the length from the wings to the lower edge of the bow is 21.6mm The wings are incorporated into the bow head. In plan they are a horizontal oval shape. On the reverse there are two integral vertical lugs, each with a central hole. These holes support an axis bar around which the iron spring is coiled, between the lugs. The upper edge of the bow head/wings has a slight vertical …
Created on: Friday 16th April 2004
Last updated: Thursday 24th February 2011
No spatial data available.


  • Thumbnail image of WAW-FE5067

Record ID: WAW-FE5067
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (flat wing ends type, Lower Severn Valley) cf. Mackreth 2011, 5a4. Plate 50. It is made of cast copper alloy. Its dimensions across the wings is 21.3mm, and the length from the wings to the bow foot is 36.9mm. The wings are semi-cylindrical with a wing cap at each terminal. The caps have a single central hole, however one cap is incomplete. These holes would have supported the axis bar around which the spring was curled. In this case the axis bar, spring and pin is missing. The bow head is hump-likewith a vertical central ridge whi…
Created on: Friday 16th April 2004
Last updated: Wednesday 19th October 2016
Spatial data recorded.


  • Thumbnail image of WAW-113460

Record ID: WAW-113460
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (flat wing ends type, Western Group) type, made from cast copper alloy. The width across the wings is 23.9mm and the length from the upper edge of the wings to the tip of the bow is 26.1mm. The brooch weighs 6.97g. The wings are semi-cylindrical, however due to abrasion the terminals are missing, therefore it is not certain whether there were any wing caps originally. The wings are decorated with a series of vertical mouldings which include grooves and a laddrer design. At the upper edge of the wings there is an intgral loopthrough w…
Created on: Thursday 29th April 2004
Last updated: Wednesday 19th October 2016
Spatial data recorded.


  • Image not taken

Record ID: WAW-BCBDF6
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
A fragment of a Roman copper alloy brooch, possibly a Colchester derivative. Only the lower half of the bow and a fragment of the catchplate remain. The bow is sub-oval in section and in plan is slender, and gradually tapers to a blunt point at the foot. The break at the upper end of the bow is possibly quite recent, as it has not developed a patina, but is corroded. Only the lower edge of the catchplate remains. The brooch has traces of a mid green patina. In length it measures 52.1mm and the width across the bow is 4.8mm.
Created on: Monday 19th July 2004
Last updated: Thursday 24th February 2011
Spatial data recorded.


  • Thumbnail image of WAW-2BFA67

Record ID: WAW-2BFA67
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (flat wing ends type, West Midlands), cf. Mackreth 2011, Transitional type 3, Plate 45. The wings are semi-cylindrical with wing caps. However both caps are incomplete. The axis bar, spring and pin are missing. Behind where the axis bar and spring should be there is a hollow, how deep is uncertain, but it is filled with a black ceramic-like substance. The exterior of the wings are decorated with three deep vertical grooves. The bow head is hump-like. The bow head is decorated with three grooves which continue down the bow. The bow …
Created on: Tuesday 5th October 2004
Last updated: Thursday 20th July 2017
Spatial data recorded.


  • Thumbnail image of WAW-2C1774

Record ID: WAW-2C1774
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The object is a brooch of Colchester derivative, Polden Hill (Mackreth Group 5, flat wing ends type, Western Group), Mackreth 2011, 5.a2. Plate 49, no. 1575. This type of brooch dates to the 1st century. The wings are semi-cylindrical with wing caps. However both caps are incomplete. The axis bar, spring and pin are missing. The exterior of the wings are undecorated. The bow head is slightly hump-like, but is quite flat in profile. The bow head is decorated with a single vertical ridge which tapers at the top of the bow. The bow gradually tapers from a wide upper flat portion to a…
Created on: Tuesday 5th October 2004
Last updated: Thursday 16th February 2017
Spatial data recorded.


  • Thumbnail image of WAW-55FEB4

Record ID: WAW-55FEB4
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
The brooch is a Colchester derivative Polden Hill (flat wing ends type, West Midlands) cf. Mackreth 2011, 4.f Plate 47. No. 905 in Hattat Brooches in Antiquity has a similar shape in profile. It has been made from cast copper alloy. The wings are semi-cylindrical with wing caps. The wing caps support a copper alloy axis bar. Around the axis bar the spring is coiled. Six coils make up the spring, which also forms a horizontal bar. The bar is held in place by a small hook at the centre of the wings. The pin is missing. The wings are undecorated. The bow head is hump-like. The upper …
Created on: Thursday 7th October 2004
Last updated: Sunday 30th October 2016
Spatial data recorded. This findspot is known as 'Welford on Avon', grid reference and parish protected.


  • Thumbnail image of WAW-A5D518

Record ID: WAW-A5D518
Object type: BROOCH
Broad period: ROMAN
County: Worcestershire
Workflow stage: Published Find published
The brooch is a Colchester derivative, Polden Hill ((Mackreth Group 4, flat wing ends type, West Midlands), Mackreth 2011, 4.b-4c, Plate 46. The wings are semi-cylindrical with wing caps. The wing caps support a copper alloy axis bar. Around the axis bar the spring is coiled. Nine coils make up the spring, which also forms a horizontal bar. The bar is held in place by a small hook at the centre of the wings. Only a small portion of the pin remains. The wings are undecorated. The bow head is hump-like and undecorated. On both sides a moulding is present at the junction between the b…
Created on: Monday 11th October 2004
Last updated: Monday 30th January 2017
Spatial data recorded. This findspot is known as 'Inkberrow area', grid reference and parish protected.


  • Thumbnail image of WAW-56E324

Record ID: WAW-56E324
Object type: BROOCH
Broad period: ROMAN
County: Warwickshire
Workflow stage: Published Find published
A copper alloy Colchester-derivative, Polden Hill type Roman brooch. The wings are semi-cylindrical, with wing caps. The wing caps support a copper alloy axis bar, which holds the sprung pin. The pin has nine turns and extends to form an external chord, which is held in place by a rear hook behind the head. A short portion of the pin survives. The head is thick and rounded and there is a central vertical ridge running from the head to above the half-way point of the bow. This ridge is decorated with a column of pellets. The lower bow tapers to a point, and is undecorated. The catchp…
Created on: Friday 2nd July 2004
Last updated: Thursday 16th February 2017
Spatial data recorded.


Records per page: 10 20 40 100

Only results with images:
Only results with 3D content:

Sort your search by:

Which direction?

Total results available: 534
Search server index: asgard

You are viewing records: 1 - 20.

Search statistics

  • Total quantity: 538
  • Mean quantity: 1.007
  • Maximum: 4

Filter your search

Denomination

1 - 20 of 534 records.

Other formats: this page is available as json xml rss atom kml geojson qrcode representations.