Record ID: YORYM-E0A858
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman T-shape brooch dating from the 1st - 2nd Century AD. Behind the head the tubular spring / pin mechanism survives but it is broken, complete with an iron axis bar. The pin is missing. The head is narrow and the wings are undecorated. There is a raised spine running down the front of the bow. The lower bow tapers to the foot, both the foot proper and catchplate survive, but are damaged. Similar to Hattatt, p302-3. Fig: 161-2.
Created on: Wednesday 14th January 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby', grid reference and parish protected.

Record ID: YORYM-E0ACC8
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Roman Headstud brooch dating from the 2nd Century AD. Behind the head the tubular spring / pin mechanism survives in place, complete with an iron axis bar. The pin is missing. The head is angular and the wings have been decorated with two vertical incised lines, projecting out of the top of the head is a broken loop. The upper bow is sub-rectangular in section. There is a raised rounded stud on the arch of the bow. The lower bow tapers to the foot and foot proper and catchplate have broken off. Similar to Hattatt, p332-3. Fig: 191-2.
Created on: Wednesday 14th January 2009
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby', grid reference and parish protected.

Record ID: YORYM-5A5922
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Silver crossbow brooch, broken and somewhat distorted, with only the bow and part of the head intact. The bow is ovate in profile, trapezoidal in section, and is decorated with a single lengthwise groove. On the head is a conical shaped knob with flat disc below. Part of one of the arms is intact, but the end knob is broken away, whilst the other arm, the foot and pin are all missing. Dates to the late 3rd/1st part of 4th century AD
Created on: Monday 26th October 2009
Last updated: Wednesday 11th May 2022
Spatial data recorded. This findspot is known as 'West Firsby', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM1096
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
A pelta headed trumpet derivative brooch, refer to sketch on hard copy. Near right angle profile, pronounced axis bar along proximal end with compressed suspension loop, pelta head centre bar face, tapering down gradually to mid bow bulge, not decorated in acanthus style, truncated distil end. Partial catchplate, pin extinct. Very denuded surface.
Created on: Saturday 11th December 1999
Last updated: Thursday 7th June 2018
Spatial data recorded. This findspot is known as 'LINCOLNSHIRE OWERSBY', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM467
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
An oval glass centre boss brooch. Deep black? (very dark) conical paste boss. Plate decorated with interlinked S punch marks around inner border, punched circles around outer.2 rope patterned ribs either side of inner border. Plain rib between outer patterned rib border and circle stamped border. Rim around outside face. Very well made, heavily gilded. Spring type G. c85% pin and most of catch-plate intact. Reverse tinned/gilded, now very dark brown colour.
Created on: Friday 29th January 1999
Last updated: Thursday 10th March 2011
Spatial data recorded. This findspot is known as 'LINCOLNSHIRE LINCOLN', grid reference and parish protected.

Record ID: YORYM-36D3C5
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Romano-British brooch.
Created on: Monday 16th October 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E34C3
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Trumpet' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E39C0
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dolphin' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E3C72
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Knee' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E4043
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Disc Brooch with enamel decoration.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E6523
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Crossbow' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E7153
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Disc' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E79D2
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dolphin' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E7E61
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Headstud' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E81B0
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Knee' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7E8617
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dragonesque' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7EAC10
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dolphin' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-7EFD16
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Horse & Rider' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-802C97
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dolphin' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-80D3C8
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
'Dolphin' Brooch.
Created on: Thursday 7th December 2006
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Wragby Rally', grid reference and parish protected.

Record ID: YORYM-924BD7
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy dolphin brooch from the mid 1st/2nd century. The object is largely undecorated with tubular wings. The bow is circular in section. There is a small remnant of the pin in a notch just behind the bow. The foot of the brooch is very narrow from the front, though a side view shows this to be the wide, flat remains of the catchplate.
Created on: Wednesday 20th December 2006
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: YORYM-9272D2
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy dolphin brooch from the mid 1st/2nd century. The object has tubular arms. There is a notch located behind the bow for the pin (now missing). The bow is D-shaped in section down to the foot where very little remains of the catchplate with the exception of a very small ridge. The brooch is largely undecorated except for a groove encircling the end of each arm.
Created on: Wednesday 20th December 2006
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: YORYM-928BB3
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy knee brooch from the mid 2nd/mid 3rd century. The head is semi-circular (though broken) and behind this is an enclosure for the spring/pin (now missing). The bow is D-shaped in section and curves out into the 'knee'. This curves back and narrows, then widens slightly at the foot of the brooch. The only trace of the catchplate is a ridge running vertically along the foot.
Created on: Wednesday 20th December 2006
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: YORYM-EDBA61
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Most of a cast copper alloy Romano-British dolphin brooch. The foot is missing, the fragment starting in the middle of the catchplate, which is triangular. The bow is circular in section, narrow towards the foot (ca 3mm diameter) and thickening considerably just at the head (to ca 9mm diameter), where it curves in sharply. The bow itself is completely plain but there is marked pitting along the spine. The head consists of 2 plain wings, circular in section, which held the pin mechanism. The pin is now missing, but the notch in the reverse of the head is still visible.
Created on: Tuesday 14th December 2004
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: YORYM-036D75
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A cast copper alloy Romano-British headstud brooch. The foot is flat-bottomed, circular in section (6.1mm diameter) and decorated with a step in. The catchplate is triangular, joining the bow in a long concave curve, and is fairly small. The bow is 3.1mm wide where it joins the foot amd 7.7mm wide at the headstud. At the bottom it has a panel of 3 horizontal grooves. Along its main length it is decorated with a pattern of interlocking lozenge and triangle cells. These presumably once held enamel but this is now missing. The headstud is at the top of teh bow where is curves to the head.…
Created on: Wednesday 15th December 2004
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'West Firsby', grid reference and parish protected.

• 

  Image not taken

Record ID: YORYM-69E8E8
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Copper-alloy trumpet headed brooch with a chain loop above the pin gear and catch-plate which are intact. The pin is broken and most of it is missing. There is an enamelled boss and second chain or attachment loop at the foot.
Created on: Wednesday 22nd October 2003
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: YORYM-6A08A5
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
Copper-alloy cross bow brooch, complete with pin, pin gear and catch-plate. There is an equal armed cross with stub ends and a rounded knop at the top. The brooch has a projecting flange to the semicircular bow above a long foot with a terminal knop.
Created on: Wednesday 22nd October 2003
Last updated: Thursday 24th February 2011
No spatial data available.

• 

  Image not taken

Record ID: YORYM-A52C86
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
Cast copper alloy circular brooch with four rounded projections, behind one of these projections and above the pin gear are the remains of a loop for a safety chain. The back of the brooch is slightly hollow and the pin gear and catch-plate remain. The decoration is of a geometric eight pointed star with triangular cells around a central round cell for coloured enamels. Each traingular cell has a central pellet. Some of the blue and orange enamelling remains intact.
Created on: Wednesday 11th February 2004
Last updated: Thursday 24th February 2011
No spatial data available.

Record ID: YORYM-CB2D45
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
A fragment of a Roman trumpet brooch. This fragment consists of the brooch bow. The remains of the acanthus decoration can still be seen in the middle of the bow. However, the detail on the acanthus can no longer been made out. Part of the catchplate also survives.
Created on: Friday 26th September 2008
Last updated: Thursday 24th February 2011
Spatial data recorded. This findspot is known as 'Hogsthorpe', grid reference and parish protected.

Record ID: YORYM-359F41
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete cast copper alloy bow and fantail brooch, dating to the Roman period AD50-150. The head and pin of the brooch are missing. The brooch is formed of a circular boss with a fan shaped foot which has linear decoration. The circular boss itself has a concave central area containing a small round protrusion in the middle. On the opposite side of the boss to the foot is a worn break where the terminal of the brooch would have been attached. There are two knops on each side of the circle which curve downwards. On the centre of the reverse there is a protrusion along the length o…
Created on: Tuesday 19th August 2014
Last updated: Tuesday 23rd September 2014
Spatial data recorded.

Record ID: YORYM-F371D5
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Trumpet headed brooch of Roman date, c.AD 100 - 200. The head of the brooch is D-shaped with a double lug hinge mechanism to the reverse. The axis bar is retained within the lugs around which the loop of a pin is fitted. The pin proper no longer remains. The remains of a loop project from the centre of the upper curved edge of the head and a D-sectioned bow extends from the front of the head, terminating in a worn break. The metal has a mid-green patina and is worn. The brooch is 18.7mm long, 12.5mm wide, 3.2mm thick and weighs 2.9g. Similar example…
Created on: Tuesday 24th October 2017
Last updated: Wednesday 8th November 2017
Spatial data recorded.

Record ID: YORYM-AE7187
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete, copper-alloy headstud brooch of Roman date, c.AD 75 - 200. The head of the brooch comprises rectangular wings the reverse of which acts as a double lug hinge mechanism. The wings are undecorated but divided from the bow by two raised lateral ribs. The base of an annular loop remain insut at the upper edge of the head. An integrally cast, globular headstud with a central star or cross shape is evident at the base of the bow. The bow is d-shaped in section and extends behind the head to the foot. The back of the bow is decorated with a central panel of a series of repeati…
Created on: Thursday 31st October 2019
Last updated: Thursday 7th May 2020
Spatial data recorded.

Record ID: YORYM-5D4518
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Published
An incomplete copper alloy hinged Colchester derivative brooch of Roman date. The head of the brooch comprises tubular wings which would have house the pin mechanism. The mechanism and pin no longer remain. An elongated narrow D-sectioned bow extends centrally from the front of the wings, tapering to a worn pointed terminal. A sharp bend is present roughly two thirds of the way down the bow. The bow is decorated with a raised central spine running its length and the remains of a catchplate extends from the reverse of the lower bow. The metal has a light green patina and is worn. Th…
Created on: Friday 13th May 2016
Last updated: Thursday 13th October 2016
Spatial data recorded.

Record ID: YORYM-F5DA8C
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy brooch, possibly of dolphin type, of Roman date, c.AD 55 - 100. The head of the brooch comprises tubular wings which house the pin mechanism. An axis bar and pin loop remain though the pin proper has been lost. A D-sectioned bow extends centrally from the front of the wings, curving steeply before tapering to a worn pointed terminal break. The metal has a mid-green patina and is worn. The brooch is 17.2mm long, 14.8mm wide, 5.5mm thick and weighs 2.4g. Similar examples are illustrated in Hattatt, p.298, fig.157 and are dated to the 1st Century AD.
Created on: Thursday 13th October 2016
Last updated: Tuesday 25th October 2016
Spatial data recorded.

Record ID: YORYM-27B568
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper alloy Umbonate disc brooch of Roman date. The brooch is circular in plan with broken and worn edges and has a conical projection at its centre. The conical boss is decorated with five remaining recessed petal-shaped cells, three of which retain traces of yellow enamel. The other two appear to have orange or brown enamel. The sub triangular spaces resulting between these four cells retain red enamel. A recessed circumferential groove is present at the base of the boss. The remaining outer rim of the brooch is decorated with numerous tongue-shaped cells of varying s…
Created on: Thursday 1st May 2014
Last updated: Friday 2nd May 2014
Spatial data recorded.

Record ID: YORYM-D008E7
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Trumpet brooch of Roman date, c. AD 75 - 175. Only the lower bow remains. It is D-shaped in section with a semi-circular collar to the upper end before the break. The bow tapers in width and terminates in semi-circular foot knop with semi-circular collar above. An almost complete integral sheet catchplate projects to the reverse of the bow with a curved hook to accommodate the pin. The metal has a mid-green patina and is worn. The brooch is 28.2mm long, 5.1mm wide, 14.2mm thick and weighs 2.7g. Similar examples are illustrated in Hattatt, p.326, f…
Created on: Wednesday 17th August 2022
Last updated: Thursday 25th August 2022
Spatial data recorded.

Record ID: YORYM-D03420
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy headstud brooch of Roman date, c.AD 75 - 200. Mackreth 2011, Headstud Type 6, Plate 73, no.11868 / 7357. The head of the brooch comprises tubular wing with act as a hinge mechanism. An axis bar is retained within the hinge around which the loop of the pin remains. The pin proper no longer survives. The remains if a raised bar survive to the upper edge of the head though are worn. The front of the wings are stepped with two visible alternating ridge and groove designs. A central sub-rectangular sectioned bow extends from between the wings, tapering to a worn …
Created on: Wednesday 17th August 2022
Last updated: Thursday 25th August 2022
Spatial data recorded.

Record ID: YORYM-51FBC9
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy headstud brooch of Roman date, c.AD 75 - 200. Mackreth 2011, Hinged Headstud Type 4, Plate 72, no.7229. The head of the brooch comprises rectangular wings the reverse of which act as a double lug hinge mechanism which retains a central axis bar. Only a small fragment of the pin loop remains and the pin proper no longer remains. A circular attachment loop projects from the upper edge of the head. The front of the wings are decorated with three alternating ridge and grooves resulting in a stepped appearance. An integral rectangular sectioned bow ext…
Created on: Thursday 11th August 2022
Last updated: Thursday 25th August 2022
Spatial data recorded.

Record ID: YORYM-BAE69C
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Trumpet brooch of Roman date, c. AD 75 - 175. Mackreth 2011, Standard Trumpet Type 1a3, Plate 79, no.5090. The head is ovate with a single centrally positioned integral vertical lug to the reverse. The spring and loop remain though the pin is lost to a worn break. An axis bar remains fitted through the lug. The ends curve upward to form a head loop held at the waist by a rectangular sectioned open staple. The staple has a central raised horizontal bar decorated with irregularly spaced vertical grooves. Five turns of the spring remain around the ax…
Created on: Tuesday 16th August 2022
Last updated: Thursday 25th August 2022
Spatial data recorded.

Record ID: YORYM-DED1A9
Object type: BROOCH
Broad period: ROMAN
County: Lincolnshire
Workflow stage: Awaiting validation
An incomplete copper-alloy Aucissa, Bagenden Type C (Hull T52) of Roman date, c.AD 43 - 75. The head of the brooch is formed from a flat, rectangular panel which splits in two at the back and rolls up and round to form the integral hinge. An iron axis bar is retained within the rolled head and the slot would have allowed the pin to fit. The pin no longer remains. From the front of the head plate an integral D-sectioned bow extends, terminating in a worn break. The front of the bow is decorated with two parallel grooves resulting in a raised spine with transverse grooved decoration.…
Created on: Wednesday 10th April 2019
Last updated: Wednesday 24th April 2019
Spatial data recorded.